journal article·2026-01-01

Advanced Modeling of Creep Behavior Under High Temperatures: Interplay of Strain Hardening, Damage, and Tensile Boundary Stress

Wufan Chen, Li Meng, Xu He, Jiangtao Zhang

Publisher page

Abstract

Abstract This article proposes a comprehensive creep constitutive model that considers the strain-hardening effect during the initial creep stage, the damage accumulation characteristics throughout the creep period, and the boundary stress of tensile creep. Based on the concept of creep activation energy, the model incorporates the influence of temperature on creep deformation and employs a set of parameters to consistently describe creep behavior under different temperatures. The proposed model effectively captures the “U”-shaped creep strain rate curve throughout the entire creep period, which differs from the traditional theory that assumes a long-term steady-state creep stage. Additionally, it can describe the power-law breakdown phenomenon of creep strain rate and derive a creep life prediction formula based on the integration of damage parameters. Comparisons with experimental data from P92 and T92 alloys demonstrate that the model maintains high predictive accuracy across the overall range, with only some deviations in creep strain rate and creep life predictions under low-stress conditions. These results confirm the model's validity and highlight its potential for engineering applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · High Temperature Alloys and Creep · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Tongji University School of Aerospace Engineering and Applied Mechanics, , , ; Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, , ,

Wuhan University of Technology School of Aerospace Engineering and Applied Mechanics, , , ; Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, , ,

Tianmushan Laboratory, Hangzhou 311115, China

Computational Aerodynamics Institute, China Aerodynamics Research and Development Center , ,

Wuhan University of Technology Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, , ,

Funding

National Natural Science Foundation of China

References (48)

Show source-provided references
1. Determination of High-Temperature Creep and Post-Creep Response of Structural Steels10.1016/j.jcsr.2022.107287 ↗
2. Creep Rupture Limit Analysis for Engineering Structures Under High-Temperature Conditions10.1016/j.ijpvp.2022.104763 ↗
3. Creep and High-Temperature Tensile Deformation Behavior of the TIG Welded P92/304L Dissimilar Steel Weld Joints10.1007/s11665-024-09872-y ↗
4. Microstructural Evolution and Creep Mechanisms in Ni-Based Single Crystal Superalloys: A Review10.1016/j.jallcom.2019.152954 ↗
5. High Temperature Creep and Embrittlement in Metals and Alloys Under Conditions of the Long-Term Usage10.1007/s00707-024-04026-6 ↗
6. Elevated-Temperature Creep Properties and Deformation Mechanisms of a Non-Equiatomic FeMnCoCrAl High-Entropy Alloy10.1016/j.jmrt.2024.04.013 ↗
7. High Temperature Creep Strength Design and Optimization of Solid Oxide Fuel Cell10.1016/j.ijhydene.2022.04.261 ↗
8. Review on the Creep Resistance of High-Temperature Titanium Alloy10.1007/s12666-020-02137-x ↗
9. Limitations on the Computational Analysis of Creep Failure Models: A Review10.1016/j.engfailanal.2021.105968 ↗
10. Creep Rupture Data Assessment—New Uncertain Challenges Require New Uncertain Answers10.1080/09603409.2023.2268334 ↗
11. Thrust Rebalance to Extend Engine Time On-Wing With Consideration of Engine Degradation and Creep Life Consumption10.1115/1.4063791 ↗
12. Creep Life Assessment of Modified 9Cr-1Mo Steel Based on Monkman–Grant Relationship Considering Temperature and Stress Dependences of Strain Required for Rupture10.1080/09603409.2024.2305498 ↗
13. A Modified θ Projection Model for Constant Load Creep Curves—I. Introduction of the Model10.1016/j.jmst.2018.09.024 ↗
14. A Modified θ Projection Model for Constant Load Creep Curves—II. Application of Creep Life Prediction10.1016/j.jmst.2018.09.035 ↗
15. A Theta Projection Model for Compressive Creep Behaviour of Refractories at High Temperature: Application to Alumina-Spinel10.1007/s11012-023-01734-6 ↗
16. Short-Term Creep Data Based Long-Term Creep Life Predictability for Grade 92 Steels and Its Microstructural Basis10.1007/s12540-018-00214-x ↗
17. A Phenomenological Model for Predicting Long-Term High Temperature Creep Life of Materials From Short-Term High Temperature Creep Test Data10.1016/j.ijmecsci.2021.106505 ↗
18. A New Creep Constitutive Relationship for High Temperature Alloys10.1016/j.ijmecsci.2020.106207 ↗
19. A Mechanistic Model for Creep Lifetime of Ferritic Steels: Application to Grade 9110.1016/j.ijplas.2021.103086 ↗
20. Constitutive Modelling of Coupled Creep Deformation and Age Hardening Behavior of Aluminum Alloys Under Various Thermal and Mechanical Loadings10.1016/j.jmrt.2023.05.183 ↗
21. Development of a Unified Constitutive Model Coupled With a Continuum Damage Model for Design and Evaluation of High-Temperature Components10.1016/j.ijsolstr.2022.111935 ↗
22. An Improved Creep Damage Mechanics Model and Its Application to Evaluate Creep Strain Design Codes for Hot Outlet Manifold in Steam Reformer Furnace10.1016/j.ijpvp.2022.104649 ↗
23. Creep Crack Simulations Using Continuum Damage Mechanics and Extended Finite Element Method10.1177/1056789517737593 ↗
24. Modelling of Creep and Plasticity Deformation Considering Creep Damage and Kinematic Hardening10.1016/j.engfracmech.2019.106582 ↗
25. Creep Properties and Life Model of Anisotropic Ni-Based Single Crystal Superalloys Over a Wide Temperature Range10.1016/j.ijmecsci.2023.108674 ↗
26. Creep Damage Models and Their Applications for Crack Growth Analysis in Pipes: A Review10.1016/j.engfracmech.2015.09.055 ↗
27. Modelling Creep Behaviour and Failure of 9Cr–0.5Mo–1.8W–VNb Steel10.1016/j.ijpvp.2009.03.006 ↗
28. Creep Damage Characterization of UNS N10003 Alloy Based on a Numerical Simulation Using the Norton Creep Law and Kachanov–Rabotnov Creep Damage Model10.1007/s41365-019-0586-2 ↗
29. Prediction Method for Creep Life of Thin-Wall Specimen With Film Cooling Holes in Ni-Based Single-Crystal Superalloy10.1016/j.ijmecsci.2018.04.018 ↗
30. A Study of the Creep Behavior of Modified 9Cr–1Mo Steel Using Continuum-Damage Modeling10.1016/j.ijplas.2012.04.004 ↗
31. A Dislocation-Based Damage-Coupled Constitutive Model for Single Crystal Superalloy: Unveiling the Effect of Secondary Orientation on Creep Life of Circular Hole10.1016/j.ijplas.2024.103874 ↗
32. Creep Cavity Growth Models for Austenitic Stainless Steels10.1016/j.msea.2016.08.005 ↗
33. Creep Damage Evolution by Cavity Nucleation and Growth Considering the Cavity Closure Under Cyclic Loading Conditions10.1111/ffe.14389 ↗
34. Creep Performance Study of Inconel 740H Weldment Based on Microstructural Deformation Mechanisms10.1115/1.4064994 ↗
35. Dislocation-Based Modeling of Long-Term Creep Behaviors of Grade 91 Steels10.1016/j.actamat.2018.02.001 ↗
36. A Thermodynamically Consistent Creep Constitutive Model Considering Damage Mechanisms10.1016/j.ijmecsci.2024.109373 ↗
37. An Entropy-Based Failure Prediction Model for the Creep Process10.1177/10567895231194654 ↗
38. An Entropy-Based Failure Prediction Model for the Creep and Fatigue of Metallic Materials10.3390/e21111104 ↗
39. On the Applicability of Boundary Condition Based Tensile Creep Model in Predicting Long-Term Creep Strengths and Lifetimes of Engineering Alloys10.1016/j.euromechsol.2018.07.008 ↗
40. Design of a New 11Cr Martensitic Steel and Evaluation of Its Long-Term Creep Rupture Strengths10.1016/j.jmrt.2022.08.116 ↗
41. A Review of Different Creep Mechanisms in Mg Alloys Based on Stress Exponent and Activation Energy10.1002/adem.201500393 ↗
42. A Review of Creep Analysis and Design Under Multi-axial Stress States10.1016/j.nucengdes.2007.02.003 ↗
43. Effect of Nanoparticles on Creep Behaviour of Metals: A Review10.1016/j.jmrt.2023.08.068 ↗
44. Deep Insights on the Creep Behavior and Mechanism of a Novel G115 Steel: Micromechanical Modeling and Experimental Validation10.1016/j.ijplas.2021.103124 ↗
45. Effect of Stress on the Creep Deformation of ASME Grade P92/T92 Steels10.3139/146.101651 ↗
46. The Microstructure Evolution and Its Effect on Creep Behaviors in P92 Steel Under Different Stresses10.1016/j.matchar.2023.112744 ↗
47. Long-Term Creep Strength Predictions From Short-Term Creep Test Data for High Cr Creep-Resistant Steels and Microstructural Evolution Origin of Over-Predictions10.1080/09603409.2018.1548682 ↗
48. Rationalization of Short-Term Creep Test Data and Prediction of Long-Term Creep Strengths of a Fe–20Cr–25Ni (Wt Pct) Austenitic Stainless Steel (Alloy 709)10.1007/s11661-019-05292-z ↗