Comparison of Fatigue Life of AA2050-T852 and AA7050-T7452 Alloy Forgings at Different Orientations
Source abstract
Abstract
Abstract This study compares the fatigue performance between the AA2050-T852 alloy and AA7050-T7452 alloy traditionally used in aircraft structures. Rotating beam fatigue tests were performed on AA2050-T852 and AA7050-T7452 specimens cut from forged plates with different orientations and at different thickness levels. The samples were tested at 345 MPa (50 ksi), 276 MPa (40 ksi), 207 MPa (30 ksi), and 172 MPa (25 ksi). Scanning Electron Microscope (SEM) images showed mixed-mode failure in all samples. However, the equiaxed dimples were more abundant and finer in the AA2050-T852 alloy. The results indicated that AA2050-T852 alloy demonstrated better fatigue life performance compared to AA7050-T7452 alloy at almost all stresses. No significant difference in fatigue anisotropy was found in one alloy versus the other.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Loyola Marymount University Department of Mechanical Engineering, , Los Angeles, CA 90045
Kunming University of Science and Technology Department of Materials Science and Engineering, , Kunming 650093 , China
Loyola Marymount University Department of Computer Science, , Los Angeles, CA 90045
Loyola Marymount University Mane Laboratories College of Science and Engineering, , Los Angeles, CA 90045
Weber Metals Inc. , Paramount, CA 90723
References (42)
Show source-provided references
1. Flow Curve Correction and Processing Map of 2050 Al–Li Alloy10.1016/S1003-6326(18)64674-6 ↗
2. Fatigue Resistance of Al-Cu-Li and Comparison With 7XXX Aerospace Alloys
3. Evaluation of AA 2050-T87 Al-Li Alloy Crack Turning Behaviour10.4028/www.scientific.net/MSF.519-521.1323 ↗
4. Corrosion Fatigue Behavior of 7050 Aluminum10.1016/S0013-7944(97)00173-2 ↗
5. Evolution of Grain Boundary Precipitates in Al 7075 Upon Aging and Correlation With Stress Corrosion Cracking Behavior10.1007/s11661-012-1413-0 ↗
6. Fatigue and Crack Growth in 7050-T7451 Aluminum Alloy Under Constant- and Variable- Amplitude Loading10.1115/1.4007755 ↗
7. Cracking During the Installation of Interference Fit Fasteners and Bucked Rivets in 7050-T7XXX Machined Aluminum Parts
8. Fatigue Performance of Laser Peened 7050-T7451 Aluminum Alloy10.1115/PVP2006-ICPVT-11-93416 ↗
9. Mean Stress Effects on Crack Propagation Rate and Crack Closure in 7050-T76 Aluminum Alloy10.1016/0013-7944(78)90031-0 ↗
10. Identification and Validation of a Low Cycle Fatigue Damage Model for Al 7075-T6 Alloy10.1115/1.4028840 ↗
11. An Investigation of the Cyclic Fatigue and Fracture Behavior of Aluminum Alloy 705510.1016/S0261-3069(01)00071-1 ↗
12. Study of Fracture Behavior for Anisotropic 7050-T7451 High-Strength Aluminum Alloy Plate10.1016/j.ijmecsci.2017.05.011 ↗
13. Probabilistic Analysis of the Effect of Shot Peening on the High and Low Cycle Fatigue Behaviors of AA 7050-T745110.1016/j.ijfatigue.2018.02.029 ↗
14. Correlation Between Micro-Mechanical Property and Very High Cycle Fatigue (VHCF) Crack Initiation in Friction Stir Welds of 7050 Aluminum Alloy10.1016/j.ijfatigue.2017.07.028 ↗
15. TEM Study on Microstructures and Properties of 7050 Aluminum Alloy During Thermal Exposure10.1016/S1003-6326(09)60041-8 ↗
16. Thermal-Mechanical Loading Sequences Related Creep Aging Behaviors of 7050 Aluminum Alloy10.1016/j.jallcom.2017.10.035 ↗
17. The Correlation Between Flow Behavior and Microstructural Evolution of 7050 Aluminum Alloy10.1016/j.msea.2011.10.019 ↗
18. Effect of Precipitate State on Stress Corrosion Behavior of 7050 Aluminum Alloy10.1016/j.matchar.2016.01.022 ↗
19. Quantification of the Fatigue Severity of Porosity in Aluminum Alloy 7050-T7451 Thick Plate10.1016/j.ijfatigue.2018.05.019 ↗
20. Dependences of Microstructures and Properties on Initial Tempers of Creep Aged 7050 Aluminum Alloy10.1016/j.jmatprotec.2016.07.004 ↗
21. Aluminum-Copper-Lithium Alloy 2050 Developed for Medium to Thick Plate10.1007/s11665-009-9554-z ↗
22. Environmentally-Assisted Fatigue Crack Growth in AA7050-T73511 Al Alloy and AA2050-T84 Al-Cu-Li Alloy10.1590/1516-1439.018915 ↗
23. Dynamic Restoration Mechanism and Physically Based Constitutive Model of 2050 Al–Li Alloy During Hot Compression10.1016/j.jallcom.2015.07.182 ↗
24. Influence of Particles on Short Fatigue Crack Initiation in 2050-T8 and 7050-T7410.4028/www.scientific.net/MSF.794-796.296 ↗
25. Assessment of Mixed Mode Loading on Macroscopic Fatigue Crack Paths in Thick Section Al–Cu–Li Alloy Plate10.1016/j.matdes.2015.12.116 ↗
26. Wanhill · 2014 · 38110.1016/B978-0-12-401698-9.00012-4 ↗
27. The Evolution of Al-LI Base Product for Aerospace and Space Applications10.1007/s11661-012-1155-z ↗
28. Impact of Thermal Management on Post Weld Heat Treatment Efficacy in Friction Stir Welded 2050-T3 Alloy10.1016/j.jallcom.2017.06.141 ↗
29. Recent Developments in Advanced Aircraft Aluminum Alloys10.1016/j.matdes.2013.12.002 ↗
30. Fatigue Crack Propagation of Aeronautic AA7050-T7451 and AA2050-T84 Aluminum Alloys in Air and Saline Environments
31. Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
32. EduPack · 2016
33. ISO 1143:2010(E) · 2010
34. SAE AMS 4357 · 201610.4271/AMS4357 ↗
35. The Effect of Temper, Grain Orientation, and Composition on the Fatigue Properties of Forged Aluminum-Lithium 2195 Alloy10.1007/s11665-019-04300-y ↗
36. Lee · 2004
37. ISO 12107:2012(E) · 2012
38. Large Versus Small Grain Sizes on Fatigue Life of Aluminum Aircraft Wheels10.4028/www.scientific.net/DDF.391.174 ↗
39. Variability in Fatigue Lives: An Effect of the Elastic Anisotropy of Grains?10.1016/S1566-1369(03)80018-3 ↗
40. Stephens · 2000
41. The Effect of Inhomogenous Plastic Deformation on the Ductility and Fracture Behavior of Age Hardenable Aluminum Alloys10.1016/j.ijplas.2004.03.003 ↗
42. The Comparison of Yield and Fatigue Strength Dependence on Grain Size10.1016/0036-9748(71)90059-7 ↗