journal article·2024-01-01

Microstructural Evolution and Room Temperature Mechanical Properties in Additively Manufactured Mar M 509 With Short Cycle Heat Treatment

Shreehard Sahu, Bikash Kumar, Siba Sundar Sahoo, Balila Nagamani Jaya, Dheepa Srinivasan

Publisher page

Abstract

Abstract The Co-based superalloy Mar M 509, known for its high-temperature oxidation and hot corrosion resistance, is processed via laser powder bed fusion (LPBF). Microstructure and mechanical properties of Mar M 509 in as-printed (As-P) and heat-treated (HT) states are compared based on two build orientations (longitudinal (L) and transverse (T)) to establish structure-property links with heat treatment. The As-P condition displays a distinct cellular microstructure (500–600 nm) with 50–60 nm carbide particles adorning cell boundaries. Longitudinal (L) build has columnar grains (8–35 μm along the major axis) with a grain aspect ratio of 4, while transverse (T) orientation exhibits equiaxed, bimodal microstructure (5–10 μm and 15–25 μm grain sizes). Strong <001> texture is noted in L. Mechanical properties at room temperature differ between L and T; T (569 ± 12 HV) has 15% higher hardness compared to L (489 ± 18 HV) and 34% higher 0.2% yield strength (YS), but 30% lower elongation than L. Post a short heat treatment cycle at 1250 °C, weld bead structure and cell boundaries break down. Both L (25–33 μm along the major axis) and T orientations (5–42 μm) experience grain growth, and carbides coarsen (250–350 nm). Post-heat treatment, dislocation density decreases, indicating recrystallization; lattice parameter of matrix reduces, implying solute depletion contributing to carbide enrichment. Yield strength drops from 860 MPa to 740 MPa in L and from 1150 MPa to 840 MPa in T, with ductility rising from 14% to 23% in L.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Indian Institute of Technology Bombay Department of Metallurgical Engineering and Materials Science, , Mumbai, Maharashtra 400076 , India

Indian Institute of Science Pratt & Whitney, Research and Development Center, , Bangalore, Karnataka 560012 , India

References (15)

Show source-provided references
1. Hierarchical Microstructure and Enhanced Mechanical Properties of SLM-Fabricated GH5188 Co-Superalloy10.1016/j.msea.2021.142276 ↗
2. High Temperature Properties of Mar-M Alloy 509
3. Selection of Methods for Etching Carbides in MAR-M509 Cobalt-Base Superalloy and Acquisition of Their Images10.1016/j.matchar.2005.11.015 ↗
4. Structural Stability of Mar-M-509—A Cobalt-Base Superalloy10.7449/1968/Superalloys_1968_436_459 ↗
5. Effects of Build Orientation and Heat Treatment on the Evolution of Microstructure and Mechanical Properties of Alloy Mar-M-509 Fabricated Via Laser Powder Bed Fusion10.1016/j.ijplas.2019.06.002 ↗
6. Davis · 2000
7. Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science10.1016/S2238-7854(12)70009-1 ↗
8. Selective Laser Melting of Carbon-Free Mar-M509 Co-Based Superalloy: Microstructure, Micro-Cracks, and Mechanical Anisotropy10.1007/s40195-021-01348-5 ↗
9. Microstructural Evolution and Mechanical Properties of Direct Metal Laser-Sintered (DMLS) CoCrMo After Heat Treatment10.1007/s11661-018-4771-4 ↗
10. Additive Manufacturing of Cardiovascular CoCr Stents by Selective Laser Melting10.1016/j.matdes.2017.01.091 ↗
11. Design and Functional Testing of a Novel Balloon-Expandable Cardiovascular Stent in CoCr Alloy Produced by Selective Laser Melting10.1016/j.jmapro.2020.03.060 ↗
12. Effect of Building Direction on the Mechanical Anisotropy of Biocompatible Co–Cr–Mo Alloy Manufactured by Selective Laser Melting Process10.1016/j.jallcom.2020.155055 ↗
13. Grain Growth During Selective Laser Melting of a Co–Cr–Mo Alloy10.1007/s10853-017-0975-z ↗
14. Microstructural Characteristics of the Nickel-Based Alloy IN738LC and the Cobalt-Based Alloy Mar-M509 Produced by Selective Laser Melting10.1016/j.msea.2016.01.058 ↗
15. Recent Advances in Alloy Development for Metal Additive Manufacturing in Gas Turbine/Aerospace Applications: A Review