Process-Induced History Effects on the Mechanical Behavior of Additively Manufactured IN718 Alloys
Source abstract
Abstract
Abstract The design complexities with advancements in technology limit the operational efficiency and conventional manufacturing ability of Nickel-based superalloy 718 (IN718). Additive manufacturing (AM) can overcome these drawbacks by producing near-net shape components; however, a thorough understanding of mechanical behavior at elevated temperatures and different loading conditions (i.e., tension and compression) is required before its actual use. In this work, process-induced history effects on the mechanical behavior in an additively manufactured IN718 alloy were investigated. In particular, two different heat treatment routes were chosen to tailor the microstructure by having the specific dissolution of precipitated phases. Quasi-static (QS) and creep experiments were performed in both as-build and postprocessed conditions. The build directions and the nature of the phases present were observed to be the governing factors. Results showed that the horizontal orientation had higher yield strength compared to the vertical orientation, irrespective of loading condition. Compression and tensile creep experiments indicated that the creep life was dependent on the orientation of δ/Laves phases. Furthermore, a tension-compression asymmetry was observed in both QS and creep testing. Overall, postprocessing proved to be advantageous in improving mechanical behavior and reducing the anisotropy related to the build direction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Arizona State University School for Engineering of Matter, Transport, and Energy, , Tempe, AZ 85287
Army Research Laboratory , Aberdeen Proving Ground, MD 21005
References (48)
Show source-provided references
1. Jewett · 1991 · 74910.7449/1991/Superalloys_1991_749_760 ↗
2. Paulonis · 2001 · 1310.7449/2001/Superalloys_2001_13_23 ↗
3. Recent Developments in the Progress of Superalloy 71810.1007/BF03222252 ↗
4. Coherency Strengthening in Ni Base Alloys Hardened by D022 Precipitates10.1007/BF02642938 ↗
5. Wear Mechanisms of Ceramic Cutting Tools When Machining Ferrous and Non-Ferrous Alloys10.1016/0955-2219(90)90019-C ↗
6. High-Speed Machining of Inconel 718 With Ceramic Tools10.1016/S0007-8506(07)62402-0 ↗
7. Flexible Manufacturing of Metallic Products by Selective Laser Melting of Powder10.1016/j.ijmachtools.2006.01.024 ↗
8. Corrosion Behavior of 7050 and 7075 Aluminum Alloys Processed by Reactive Additive Manufacturing10.1016/j.electacta.2023.143357 ↗
9. Additive Manufacturing of Metals10.1016/j.actamat.2016.07.019 ↗
10. On the Mechanical Behaviour of Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance10.1016/j.ijfatigue.2012.11.011 ↗
11. Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines10.3390/ma10060672 ↗
12. Functionally Graded Inconel 718 Processed by Additive Manufacturing: Crystallographic Texture, Anisotropy of Microstructure and Mechanical Properties10.1016/j.matdes.2016.10.075 ↗
13. Effect of Scanning Strategy on Mechanical Properties of Selective Laser Melted Inconel 71810.1016/j.msea.2019.03.007 ↗
14. Effect of Heat Treatment on the Microstructure and Mechanical Properties of Inconel 718 Processed by Selective Laser Melting10.1016/j.msea.2015.05.035 ↗
15. Microstructure and Mechanical Properties of Inconel 718 Produced by Selective Laser Melting: Sample Orientation Dependence and Effects of Post Heat Treatments10.1016/j.msea.2017.12.043 ↗
16. The Effect of Interdendritic δ Phase on the Mechanical Properties of Alloy 718 Built Up by Additive Manufacturing10.1016/j.matdes.2016.12.026 ↗
17. The Effect of Energy Density on Texture and Mechanical Anisotropy in Selective Laser Melted Inconel 71810.1016/j.matdes.2020.108642 ↗
18. Build Orientation Effects on Texture and Mechanical Properties of Selective Laser Melting Inconel 71810.1007/s11665-019-03980-w ↗
19. Microstructure and Mechanical Properties of Selective Laser Melted Inconel 718 Compared to Forging and Casting10.1016/j.matlet.2015.10.136 ↗
20. Superior Creep Strength of a Nickel-Based Superalloy Produced by Selective Laser Melting10.1016/j.msea.2016.07.061 ↗
21. Study on the Microstructure and Creep Behavior of Inconel 718 Superalloy Fabricated by Selective Laser Melting10.1016/j.msea.2019.138282 ↗
22. The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting10.3390/ma11060996 ↗
23. Effects of Build Direction and Heat Treatment on Creep Properties of Ni-Base Superalloy Built Up by Additive Manufacturing10.1016/j.scriptamat.2016.10.035 ↗
24. Nanotechnology Enabled Design of a Structural Material With Extreme Strength as Well as Thermal and Electrical Properties10.1016/j.mattod.2019.09.024 ↗
25. Anomalous Mechanical Behavior of Nanocrystalline Binary Alloys Under Extreme Conditions10.1038/s41467-018-05027-5 ↗
26. Thermo-Mechanical Strengthening Mechanisms in a Stable Nanocrystalline Binary Alloy—A Combined Experimental and Modeling Study10.1016/j.matdes.2018.107551 ↗
27. An Experimental and Modeling Investigation of Tensile Creep Resistance of a Stable Nanocrystalline Alloy10.1016/j.actamat.2020.08.020 ↗
28. Extreme Creep Resistance in a Microstructurally Stable Nanocrystalline Alloy10.1038/nature19313 ↗
29. Varied Heat Treatments and Properties of Laser Powder Bed Printed Inconel 71810.1016/j.msea.2019.03.103 ↗
30. Effect of Homogenization and Solution Treatments Time on the Elevated-Temperature Mechanical Behavior of Inconel 718 Fabricated by Laser Powder Bed Fusion10.1038/s41598-021-81618-5 ↗
31. Experimental Characterization and Crystal Plasticity Modeling of Anisotropy, Tension-Compression Asymmetry, and Texture Evolution of Additively Manufactured Inconel 718 at Room and Elevated Temperatures10.1016/j.ijplas.2019.09.002 ↗
32. Effect of Standard Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser Melting Manufactured Inconel 718 Superalloy10.1016/j.msea.2015.06.021 ↗
33. Effect of Thermomechanical Working on the Microstructure and Mechanical Properties of Hot Isostatically Pressed Superalloy Inconel 71810.1016/j.msea.2004.05.062 ↗
34. On Grain Boundary Sliding and Diffusional Creep10.1007/BF02664244 ↗
35. The Microstructure and Mechanical Properties of Deposited-IN718 by Selective Laser Melting10.1016/j.jallcom.2011.10.107 ↗
36. Effect of Molten Pool Boundaries on the Mechanical Properties of Selective Laser Melting Parts10.1016/j.jmatprotec.2014.06.002 ↗
37. Heat Treatment of Inconel 718 Produced by Selective Laser Melting: Microstructure and Mechanical Properties10.1016/j.msea.2019.02.046 ↗
38. Effects of Thermal Cycles on the Microstructure Evolution of Inconel 718 During Selective Laser Melting Process10.1016/j.addma.2017.08.016 ↗
39. Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 71810.1007/s11661-009-9949-3 ↗
40. Microstructure and Hardness Studies of Inconel 718 Manufactured by Selective Laser Melting Before and After Solution Heat Treatment10.1016/j.msea.2017.02.062 ↗
41. The Deformation and Ageing of Mild Steel: III Discussion of Results10.1088/0370-1301/64/9/303 ↗
42. The Cleavage Strength of Polycrystals10.1016/0013-7944(87)90050-6 ↗
43. Effect of δ Phase on High Temperature Mechanical Performances of Inconel 718 Fabricated With SLM Process10.1016/j.msea.2019.138327 ↗
44. Delta Phase Precipitation in Inconel 71810.1016/j.matchar.2004.07.004 ↗
45. A Review of Strain Analysis Using Electron Backscatter Diffraction10.1017/S1431927611000055 ↗
46. Anisotropic Tensile Behavior of In Situ Precipitation Strengthened Inconel 718 Fabricated by Additive Manufacturing10.1016/j.msea.2017.06.098 ↗
47. The Influence of Laves Phases on the Room Temperature Tensile Properties of Inconel 718 Fabricated by Powder Feeding Laser Additive Manufacturing10.1016/j.actamat.2018.10.032 ↗
48. Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 71810.1007/s11661-018-4812-z ↗