journal article·2025-10-01

Advancing Vacuum Carburizing Simulation: Calibration and Implementation of a Carbon-Level-Dependent Diffusion Model for AISI 9310 Steel

Dong Xu, Jeongho Kim, Lesley Frame, Jiong Tang

Publisher page

Abstract

Abstract Understanding the behavior of carbon diffusion in austenite is critical to the design and optimization of heat treatment processes such as vacuum carburization of alloy steels. The carburization process is complex due to the intricate surface chemical reactions, resulting in a carbon content distribution curve that typically exhibits an inverse-S shape—a phenomenon that traditional carbon diffusion models fail to explain. Alternately, the carbon-level-dependent carbon diffusion model suggests that local carbon concentration impacts the carburization rate, implying that carburization parameters should be considered functions of carbon concentration. In this research, a forward analysis was first conducted by leveraging the analogy between the carburizing process and the heat transfer process to establish an efficient finite element modeling. A custom user subroutine, UMATHT, was developed, enabling the integration of the carbon-level-dependent diffusion model within abaqus-based analysis. Subsequently, an inverse analysis framework was formulated to facilitate the parametric identification of the carbon-level-dependent diffusion model. Combining the model prediction with a simulated annealing stochastic optimization algorithm, we identified the coefficients in the carbon diffusion model by minimizing the difference between experimental measurements and finite element simulations under various conditions within the parametric space. Our results have demonstrated that the carbon-level-dependent model not only offers smaller prediction errors in AISI 9310 steel but also accurately reproduces the characteristic inverse-S carbon distribution curve which traditional models cannot achieve. This research provides new insights into the vacuum carburization characterization of alloy steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Connecticut School of Mechanical, Aerospace, and Manufacturing Engineering, , ,

University of Connecticut School of Civil and Environmental Engineering, , ,

University of Connecticut Department of Materials Science and Engineering, , ,

References (20)

Show source-provided references
1. Microstructure Evolution and Mechanical Properties of AISI 430 Ferritic Stainless Steel Strengthened Through Laser Carburization10.1115/1.4055025 ↗
2. Thermal-Induced Transformation of Retained Austenite in the Simulated Case of a Carburized Steel10.1115/1.2902161 ↗
3. Combined Edge and Anisotropy Effects on Fickian Mass Diffusion in Polymer Composites10.1115/1.1789959 ↗
4. Simulating Distortion and Residual Stresses in Carburized Thin Strips10.1115/1.1543973 ↗
5. Experimental Measurements and Numerical Simulation of Stress and Microstructure in Carburized 5120 Steel Disks10.1016/S0921-5093(00)01292-2 ↗
6. Carbon Diffusivity in Multi-Component Austenite10.1016/j.scriptamat.2011.01.001 ↗
7. Numerical Simulation of Low-Pressure Carburizing and Gas Quenching for Pyrowear 53 Steel10.3390/met13020371 ↗
8. Diffusivity of Carbon in Iron and Steels at High Temperatures10.1063/1.328314 ↗
9. Modeling of Carbon Concentration Profile Development During Both Atmosphere and Low-Pressure Carburizing Processes10.1007/s11665-012-0353-6 ↗
10. A Numerical Model for Vacuum Carburization of an Automotive Gear Ring10.1007/s12540-011-6004-x ↗
11. Numerical Simulation of a Heat-Treated Ring Gear Blank10.1115/1.482802 ↗
12. Comparison of Two Finite Element Simulation Codes Used to Model the Carburizing of Steel10.1016/j.commatsci.2012.10.007 ↗
13. Numerical Simulation of Phase Transformation During Gas Quenching After Low-Pressure Carburizing10.1088/1757-899X/743/1/012047 ↗
14. Harnessing Multi-Objective Simulated Annealing Toward Configuration Optimization Within Compact Space for Additive Manufacturing10.1016/j.rcim.2018.10.009 ↗
15. Finite Element Modeling of Carburizing for Alloy Steels10.1520/STP24824S ↗
16. Identification of Carbon Diffusivity of S9310 Utilizing Correlated Numerical and Experimental Investigations
17. A Knowledge-Based Archive Multi-Objective Simulated Annealing Algorithm to Optimize Series–Parallel System With Choice of Redundancy Strategies10.1016/j.cie.2014.11.008 ↗
18. 2015
19. 2022
20. Efficient Multi-Objective Simulated Annealing Algorithm for Interactive Layout Problems10.1007/s12008-021-00773-1 ↗