journal article·2017-01-01

Investigating and Rationalizing Influence of Saline Environment on Response of an Aluminum Alloy: Experimental and Numerical Study

Sheng-Li Lv, Maofei Zhang, Xiaosheng Gao, T. S. Srivatsan

Publisher page

Abstract

A sizeable number of structures, as key load-bearing components, are currently being made using both high-strength and medium-strength alloys of aluminum. During their service life, these alloys are often exposed to environments spanning a range of aggressiveness. In this study, the corrosion behavior of a high-strength aluminum alloy in both static and flowing saline solution was conducted using both experimental and numerical analysis. The damage resulting from environment-induced degradation, or corrosion, of the test specimens upon exposure to flowing saline solution was noticeably severe in comparison with the damage caused by exposure to static saline solution. Subsequent to flow-induced degradation, an analysis of dispersion of the corrosion products over the surface revealed it to be in the direction of flowing saline solution. The higher the flow rate of saline solution over the sample surface, the more severe and visibly evident was the severity of damage due to environment-induced degradation. Microscopic observations of the corrosion morphology for the three different flow rates revealed a greater degree of damage to the surface with an increase in flow rate of the saline solution. This can be quantified by both an increase in area of the sample that is degraded and depth of the corrosion-induced pits. Using cellular automata algorithm in conjunction with matlab software, the damage caused by flowing saline solution for three different flow rates predicted fairly accurately the severity of the environment-induced damage due to corrosion and resultant morphology of the corrosion-related debris.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Science and Technology of UAV Laboratory, Northwestern Polytechnical University, Xi'an 710072, China e-mail:

Science and Technology of UAV Laboratory, Northwestern Polytechnical University, Xi'an 710072, China

Professor Fellow ASME Department of Mechanical Engineering, The University of Akron, Akron, OH 44325-3903 e-mail:

References (23)

Show source-provided references
1. ASM · 2010
2. 2016
3. Flow-Induced Corrosion Behavior of Absorbable Magnesium-Based Stents10.1016/j.actbio.2014.08.034 ↗
4. Influence of Exposure to Aggressive Environment on Fatigue Behavior of a Shot Peened High Strength Aluminum Alloy10.1016/j.msea.2013.02.055 ↗
5. Influence of Shot Peening on Failure of an Aluminum Alloy Exposed to Aggressive Aqueous Environments10.1007/s11665-012-0450-6 ↗
6. Progress in Study on Flow-Induced Corrosion
7. Role of Chloride Ion and Dissolved Oxygen in Electrochemical Corrosion of AA5083-H321 Aluminum-Magnesium Alloy in NaCl Solutions Under Flow Conditions
8. Flow Dependent Corrosion: Mechanisms, Damage, Characteristics and Control10.1179/000705987798271695 ↗
9. Corrosion Behavior of Aluminum Alloy in Flowing Seawater
10. Sun, T., 2010, “The Study of Flow Corrosion Performance in the Seawater for Copper and Copper Nickel Alloy,” Ph.D. dissertation, Nanjing University of Aeronautics and Astronautics, Jiangsu, China.
11. Phenomenological Model for Cavitation Erosion Rate Computation10.1016/0025-5416(87)90493-9 ↗
12. Velocity-Accelerated Corrosion Testing and Predictions
13. Lin, Z., 2009, “The Study of Corrosion Behavior of Ferroalloy in Flowing Sea Water,” Master's thesis, Dalian University of Technology, Ganjingzi, China.
14. Velocity Effects in Flow Induced Corrosion
15. Effect of Fluid Dynamics on the Corrosion of Copper-Base Alloys in Seawater10.5006/0010-9312-33.1.3 ↗
16. Influence of Flow Conditions on the Corrosion of AISI 304L Stainless Steel10.1016/S0043-1648(03)00562-3 ↗
17. Application of Numerical Simulation to Flow Induced Corrosion in Flowing Seawater System10.1108/00035590510615767 ↗
18. Numerical Simulation of Erosion-Corrosion in the Liquid Solid Two-Phase Flow
19. Liu, J., 2007, “Numerical Simulation of Flow-Induced Corrosion of Metals in High Flow Multiphase Seawater and Test Verification,” M.S. thesis, Beijing University of Chemical Technology, Chaoyang, China.
20. The Corrosion Behavior of Q235 and Q345 Steel in Simulated Seawater
21. Corrosion Electrochemical Behavior of AZ31 and AZ61 Magnesium Alloys in Simulated Sea Water
22. Erosion in Disturbed Liquid/Particle Pipe Flow: Effects of Flow Geometry and Particle Surface Roughness10.5006/1.3316009 ↗
23. The Cellular Automata Simulation for Metal Surface Corrosion Damage Evolution Process