journal article·2025-10-01Open access

Discrete Element Modeling of Fracture Behavior of Thermal Barrier Coatings Under Bending Conditions

Yafeng Li, Yulin Sun, Jiarui Li, Jian Zhang, Hongfei Gao, Rongzhen Wang, Jing Zhang

Abstract

Abstract The bending-driven failure test is a reliable and efficient method for evaluating the quality and load-bearing capacity of thermal barrier coatings (TBCs). This study utilizes the discrete element method (DEM) to examine the damage evolution behavior and mechanical properties of TBCs with two different coating thicknesses under four-point bending (4PB) conditions at the microscale. The results reveal that during the bending process, both thin and thick coatings experience tensile instability fractures and the formation of transverse cracks perpendicular to the interface, with crack spacing ranging from approximately one to two times the coating thickness. Thicker coatings exhibit larger crack spacing and a significantly higher delamination damage evolution rate at the interface compared to thinner coatings, displaying more pronounced delamination characteristics. While thick coatings demonstrate stronger deformation resistance, their higher bending modulus and load-bearing capacity lead to the accumulation of more cracks under equivalent strain conditions, increasing the risk of crack propagation and failure. Additionally, the pores in the coating's microstructure promote crack branching and deflection, resulting in an expanded fractured area and a negative impact on the TBC system's lifespan. This study also analyzes variations in the load–displacement curve, particle contact states, strain energy, and acoustic emission counts. By integrating experimental results, it explores the relationship between different load stages and coating damage evolution. These findings provide a theoretical basis for identifying coating failure modes in 4PB tests and offer valuable insights for the design and optimization of TBC performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Numerical methods in engineering · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Tiangong University Tianjin Key Laboratory of Advanced Mechatronics Equipment Technology, School of Mechanical Engineering, , ,

The Chinese University of Hong Kong Department of Statistics, , , ,

Shandong University of Science and Technology College of Transportation, , , ,

Purdue University School of Mechanical Engineering, School of Materials Engineering, , ,

Funding

China Scholarship Council · Natural Science Foundation of Tianjin City

References (44)

Show source-provided references
1. Plasma Electrolytic Oxidation Thermal Barrier Coating for Reduced Heat Losses in IC Engines10.1016/j.applthermaleng.2021.117316 ↗
2. Mechanical Loading Effect on Stress States and Failure Behavior in Thermal Barrier Coatings10.3390/cryst14010002 ↗
3. Effect of Internal Oxidation on the Interfacial Morphology and Residual Stress in Air Plasma Sprayed Thermal Barrier Coatings10.1016/j.surfcoat.2017.11.040 ↗
4. Effect of Material Properties on Residual Stress Distribution in Thermal Barrier Coatings10.1016/j.ceramint.2017.11.127 ↗
5. Residual Stresses in Functionally Graded Thermal Barrier Coatings10.1016/j.mechmat.2018.11.002 ↗
6. Residual Stress Distribution Along Interfaces in Thermal Barrier Coating System Under Thermal Cycles10.1016/j.ceramint.2016.11.119 ↗
7. Discrete Element Modeling of Effect of Interfacial Roughness and Pre-Crack on Crack Propagation in Thermal Barrier Coatings10.1007/s40571-024-00777-0 ↗
8. Mechanisms Governing the Thermal Shock and Tensile Fracture of PS-PVD 7YSZ TBC10.1016/j.ceramint.2017.11.190 ↗
9. Quantitative Characterization of the Interfacial Damage in EB-PVD Thermal Barrier Coating10.3390/coatings12070984 ↗
10. Low Cycle Fatigue Performance of Ni-Based Superalloy Coated With Complex Thermal Barrier Coating10.1016/j.matchar.2018.03.023 ↗
11. Fracture Toughness Measurements of Plasma-Sprayed Thermal Barrier Coatings Using a Modified Four-Point Bending Method10.1016/j.surfcoat.2010.05.029 ↗
12. Interlamellar Cracking of Thermal Barrier Coatings With TGOs by Non-Standard Four-Point Bending Tests10.1016/j.msea.2011.06.024 ↗
13. Measurements of Elastic Modulus and Fracture Toughness of an Air Plasma Sprayed Thermal Barrier Coating Using Micro-Cantilever Bending10.1016/j.surfcoat.2019.05.031 ↗
14. Determination and Analysis of Crack Growth Resistance in Plasma-Sprayed Thermal Barrier Coatings10.1016/j.engfracmech.2010.02.007 ↗
15. Application of Acoustic Emission Technology for Quantitative Characterization of Plasma-Sprayed Coatings Subjected to Bending Fatigue Tests10.1007/s11666-018-0750-y ↗
16. Failure Characterization of Solid Structures Based on an Equivalence of Cohesive Zone Model10.1016/j.ijsolstr.2019.01.008 ↗
17. Failure Behavior of Plasma-Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings Under Three-Point Bending Test via Acoustic Emission Technique10.1007/s11666-016-0497-2 ↗
18. Bending Fatigue of Thermal Barrier Coatings10.1115/1.4037587 ↗
19. Gadolinium Zirconate/YSZ Thermal Barrier Coatings: Mixed-Mode Interfacial Fracture Toughness and Sintering Behavior10.1016/j.surfcoat.2015.12.012 ↗
20. Effect of Bond Coat Topography on the Fracture Mechanics and Lifetime of Air-Plasma Sprayed Thermal Barrier Coatings10.1016/j.surfcoat.2021.127447 ↗
21. Influence of Substrate Removal Method on the Properties of Free-Standing YSZ Coatings10.3390/coatings11040449 ↗
22. Mechanical and Crack Evolution Characteristics of Coal-Rock Under Different Fracture-Hole Conditions: a Numerical Study Based on Particle Flow Code10.1007/s12665-018-7486-3 ↗
23. Discrete Element Modeling of Delamination Behavior in Thermal Barrier Coating10.1007/s40571-022-00545-y ↗
24. Influence of Pores on the Surface Microcompression Mechanical Response of Thermal Barrier Coatings Fabricated by Atmospheric Plasma Spray-Finite Element Simulation10.1016/j.apsusc.2010.09.081 ↗
25. Coupled Effects of Temperature Gradient and Oxidation on Thermal Stress in Thermal Barrier Coating System10.1016/s0020-7683(00)00309-7 ↗
26. Interfacial Fracture Toughness of APS Bond Coat/Substrate Under High Temperature10.1007/s10704-008-9294-3 ↗
27. Competition Mechanism of Interfacial Cracks in Thermal Barrier Coating System10.1016/j.matdes.2017.07.018 ↗
28. Evolution of Microstructural and Mechanical Properties of Lanthanum Zirconate Thermal Barrier Coatings at High Temperature10.1016/j.surfcoat.2014.07.067 ↗
29. Estimation of Weibull Modulus From Coarser Defect Distribution in dry-Pressed Alumina Ceramics10.2109/jcersj2.117.742 ↗
30. Through-Thickness Dependence of In-Plane Cracking Behavior in Plasma-Sprayed Thermal Barrier Coatings10.1007/s11661-005-0048-9 ↗
31. Unraveling the Cracking Mechanisms of Air Plasma-Sprayed Thermal Barrier Coatings: An In-Situ SEM Investigation10.3390/coatings13091493 ↗
32. A State-of-the-Art Review of Crack Branching10.1016/j.engfracmech.2021.108036 ↗
33. Elastic Modulus Determination of Coating Layers as Applied to Layered Ceramic Composites10.1016/0921-5093(91)90359-U ↗
34. Crack Propagation Studies of Thermal Barrier Coatings Under Bending10.1016/s0955-2219(99)00028-x ↗
35. Study of the Mechanics of the Delamination of Ceramic Functional Coatings10.1016/s0921-5093(99)00164-1 ↗
36. Damage Characterization Model of Ceramic Coating Systems Based on Energy Analysis and Bending Tests10.1016/j.ceramint.2017.12.068 ↗
37. Influence of Plasma Spray Parameters on Mechanical Properties of Yttria Stabilized Zirconia Coatings. I: Four Point Bend Test10.1016/s0921-5093(00)00799-1 ↗
38. Investigation on Interfacial Fracture Toughness of Plasma-Sprayed TBCs Using a Three-Point Bending Method10.1016/j.surfcoat.2018.08.070 ↗
39. Bending-Driven Failure Mechanism and Modelling of Double-Ceramic-Layer Thermal Barrier Coating System10.1016/j.ijsolstr.2017.10.024 ↗
40. The Cracking and Decohesion of Thin Films on Ductile Substrates10.1016/0001-6160(89)90018-7 ↗
41. Effect of Different Solution Treatments on Room Temperature Tensile Properties of GH4169 Alloy
42. Effects of Residual Stress on the Mechanical Properties of Plasma-Sprayed Thermal Barrier Coatings10.1016/j.engfracmech.2013.08.016 ↗
43. Numerical Investigation on Optimized Stimulation of Intact and Naturally Fractured Deep Geothermal Reservoirs Using Hydro-Mechanical Coupled Discrete Particles Joints Model10.1016/j.geothermics.2014.01.009 ↗
44. Young's Modulus and Fracture Toughness Determination of High Velocity Oxy-Fuel-Sprayed Bioceramic Coatings10.1016/s0257-8972(02)00026-9 ↗