Integrating Machine Learning to Investigate the Effect of Process Parameters on the Toughness of Additively Manufacturing 316L Stainless Steel
Source abstract
Abstract
Abstract This study investigates the impact toughness of additively manufactured 316L stainless steel using the bound metal deposition (BMD) technique and explores the influence of process parameters including print orientation, outer wall thickness, skin overlap percentage, and printing sequence. Charpy V-notch impact tests were conducted on samples produced with varying configurations, followed by predictive modeling using machine learning (ML). The results demonstrate that a 45 deg printing orientation and increased outer wall thickness significantly enhance impact energy absorption, with a peak value of 49.89 J. The optimal skin overlap was found to be 0%, yielding the most uniform material structure and highest toughness across both infill-first and outer-wall-first strategies. A ridge regression model was developed to predict impact energy based on printing parameters, achieving modest predictive accuracy (mean R2 = 0.151) due to dataset size and variability. Although predictive power was limited, the study highlights the potential of ML in parameter optimization for metal additive manufacturing. These findings provide valuable insights for improving the mechanical performance of 3D-printed metal components, particularly in impact-critical applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Michigan College of Innovation and Technology, Mechanical Engineering, , ,
University of Michigan College of Innovation and Technology, Mechanical Engineering, , , ; Michigan Institute for Computational Discovery and Engineering, , ,
American University of Madaba Mechanical Engineering Department, , ,
References (33)
Show source-provided references
1. Self-Propelled 3D-Printed ‘Aircraft Carrier’ of Light-Powered Smart Micromachines for Large-Volume Nitroaromatic Explosives Removal10.1002/adfm.201903872 ↗
2. 3D Biomimetic Artificial Bone Scaffolds With Dual-Cytokines Spatiotemporal Delivery for Large Weight-Bearing Bone Defect Repair10.1038/s41598-017-08412-0 ↗
3. 3D-Printed Sensors: Current Progress and Future Challenges10.1016/j.sna.2020.111916 ↗
4. Thermal Conductivity of 3D Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process10.1115/1.4066639 ↗
5. Condition Monitoring in Additive Manufacturing: A Critical Review of Different Approaches10.3390/jmmp8030095 ↗
6. Investigation of the Mechanical Characteristics of Metal 3D Printing at Different Build Orientation and Directions10.1115/1.4064383 ↗
7. Non-Linear Hyperelastic Model Analysis and Numerical Validation of 3D Printed PLA+ Material Incorporating Various Infill Densities10.3390/machines13020091 ↗
8. Exploring the Nonlinear Mechanical Characteristics of 3D-Printed ABS With Varying Infill Densities10.3390/jmmp9030103 ↗
9. The First 3-D-Printed Z-Axis Accelerometers With Differential Capacitive Sensing10.1109/jsen.2017.2768299 ↗
10. 3D Printed Personalized Titanium Plates Improve Clinical Outcome in Microwave Ablation of Bone Tumors Around the Knee10.1038/s41598-017-07243-3 ↗
11. Progress and Challenges in Fabrication of Wearable Sensors for Health Monitoring10.1016/j.sna.2020.112105 ↗
12. A Review of Mechanical Properties of Additively Manufactured Inconel 71810.1016/j.addma.2019.100877 ↗
13. Characterization of 3D-Printed PLA Parts With Different Raster Orientations and Printing Speeds10.1038/s41598-022-05005-4 ↗
14. Investigation of Tensile Properties of Different Infill Pattern Structures of 3D-Printed PLA Polymers: Analysis and Validation Using Finite Element Analysis in ANSYS10.3390/ma15155142 ↗
15. Influence of Infill Density and Orientation on the Mechanical Response of PLA+ Specimens Produced Using FDM 3D Printing
16. Investigating the Influence of Infill Percentage on the Mechanical Properties of Fused Deposition Modelled ABS Parts10.15446/ing.investig.v36n3.56610 ↗
17. Comparison of Physical and Mechanical Properties of PLA, ABS and Nylon 6 Fabricated Using Fused Deposition Modeling and Injection Molding10.1016/j.compositesb.2019.107341 ↗
18. Mechanical Evaluation of Polymeric Filaments and Their Corresponding 3D Printed Samples10.1016/j.polymertesting.2020.106561 ↗
19. Upadhyay · 2016 · 9
20. The Effect of Layer Orientation on the Mechanical Properties and Microstructure of a Polymer10.1007/s11665-010-9740-z ↗
21. Impact Properties of 3D-Printed Engineering Polymers10.1016/j.mtcomm.2021.102161 ↗
22. Fundamental Requirements of a Machine Learning Operations Platform for Industrial Metal Additive Manufacturing10.1016/j.compind.2023.104037 ↗
23. Online Distortion Simulation Using Generative Machine Learning Models: A Step Toward Digital Twin of Metallic Additive Manufacturing10.1016/j.jii.2024.100563 ↗
24. Current Applications of Machine Learning in Additive Manufacturing: A Review on Challenges and Future Trends10.1007/s11831-024-10215-2 ↗
25. Machine Learning in Tolerancing for Additive Manufacturing10.1016/j.cirp.2018.04.119 ↗
26. Raster Angle Prediction of Additive Manufacturing Process Using Machine Learning Algorithm10.3390/app14052046 ↗
27. Topology Optimization of 3D Self-Supporting Structures for Additive Manufacturing10.1016/j.addma.2016.06.010 ↗
28. 3D-Printed Metals: Process Parameters Effects on Mechanical Properties of 17-4 P H Stainless Steel10.1016/j.heliyon.2023.e17698 ↗
29. Microstructure—Toughness Relationships in 316L Stainless Steel Produced by Laser Powder Bed Fusion10.1016/j.msea.2023.145179 ↗
30. Mechanical Characterization of AISI 316L Samples Printed Using Material Extrusion10.3390/app12031433 ↗
31. Mechanical and Microstructural Anisotropy of Laser Powder Bed Fusion 316L Stainless Steel10.3390/ma15020551 ↗
32. Study of Mechanical Properties of AISI 316 Stainless Steel Processed by10.1007/s00170-010-2631-5 ↗
33. Deformation and Fracture Behaviour of 316L Stainless Steel Manufactured Through Selective Laser Melting