journal article·1999-04-01

Multiscale Polycrystal Plasticity

Robert D. McGinty, David L. McDowell

Publisher page

Abstract

Polycrystal plasticity models are commonly developed with a narrow focus on the grain as the fundamental unit of crystallographic orientation and anisotropic behavior. However, deformation and strengthening mechanisms occur simultaneously at multiple length scales and may lead to bulk deformation behavior of metals that is substantially different from that predicted by simple forms of polycrystal plasticity. The development of dislocation substructure occurs at subgrain scales while, at the same time, geometrically necessary dislocation boundaries (GNBs) are generated that extend over several grain diameters. A framework is presented here for the efficient treatment of multiple, simultaneously evolving strengthening mechanisms. The theory focuses on a macroscale hardening surface representation of the strengthening due to GNB formation. Crystallographic shear flow resistance is determined via a mapping procedure of the macroscale hardening surface to the length scale of grains. Predicted stress-strain curves based on the hardening surface formulation are compared to experimental data and polycrystal plasticity predictions for OFHC Cu. It is demonstrated that the hardening surface model of GNB strengthening mechanisms can provide improved predictive capability of nonproportional loading behavior of Cu compared to conventional slip system hardening laws commonly used in polycrystal plasticity applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0405

References (38)

Show source-provided references
1. Anand L. , and KothariM., 1996, “A Computational Procedure for Rate-Independent Crystal Plasticity,” J. Mech. Phys. Solids, Vol. 44, No. 4, pp. 525–558.10.1016/0022-5096(96)00001-4 ↗
2. Armstrong, P. J., and Frederick, C.O., 1966, “A Mathematical Representation of the Multiaxial Bauschinger Effect,” G.E.G.B. Report RD/B/N, p. 731.
3. Asaro R. J. , and RiceR., 1977, “Strain Localization in Ductile Single Crystals,” J. Mech. Phys. Solids, Vol. 25, p. 309309.10.2172/7308082 ↗
4. Asaro, R. J., 1983, “Micromechanics of Crystals and Polycrystals,” Advances in Applied Mechanics, Vol. 23, Academic Press, San Diego.10.1016/S0065-2156(08)70242-4 ↗
5. Asaro R. J. , and NeedlemanA., 1985, “Texture Development and Strain Hardening in Rate Dependent Polycrystals,” Acta Metall., Vol. 33, No. 6, pp. 923–953.10.1016/0001-6160(85)90188-9 ↗
6. Bassani J. L. , and WuT. Y., 1991, “Latent Hardening in Single Crystals II, Analytical Characterization and Predictions,” Proc. R. Soc., London, Vol. A435, p. 2121.10.1098/rspa.1991.0128 ↗
7. Bay B. , HansenN., HughesD. A., and Kuhlmann-WilsdorfD., 1992, “Evolution of FCC Deformation Structures in Polyslip,” Acta Met. Mater., Vol. 40, No. 2, pp. 205–219.10.1016/0956-7151(92)90296-Q ↗
8. Bronkhorst C. A. , KalidindiS. R., and AnandL., 1992, “Polycrystalline Plasticity and the Evolution of Crystallographic Texture in FCC Metals,” Phil. Trans. R. Soc., London, Series A, Vol. 341, pp. 443–477.10.1098/rsta.1992.0111 ↗
9. Butler G. C. , GrahamS., McDowellD. L., StockS. R., and FerneyV. C., 1998, “Application of the Taylor Polycrystal Plasticity Model to Complex Deformation Experiments,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 120, No. 3, pp. 197–205.10.1115/1.2812342 ↗
10. Butler G. C. , and McDowellD. L., 1998, “Polycrystal Constraint and Grain Subdivision,” Int. J. Plasticity, Vol. 14, No. 8, pp. 703–717.10.1016/S0749-6419(98)00018-7 ↗
11. Chang Y. W. , and AsaroR. J., 1981, “An Experimental Study of Shear Localization in Aluminum-Copper Single Crystals,” Acta Metall., Vol. 29, pp. 241–257.10.1016/0001-6160(81)90103-6 ↗
12. Cuitin˜o A. M. , and OrtizM., 1992, “Computational Modeling of Single Crystals,” Modelling Simul. Mater. Sci. Eng., Vol. 1, pp. 225–263.10.1088/0965-0393/1/3/001 ↗
13. Dawson, P. R., Beaudoin, A. J., and Mathur, K. K., 1994, “Finite Element Modeling of Polycrystalline Solids,” Numerical Predictions of Deformation Processes and the Behavior of Real Materials, Proc. 15th Riso Symposium On Materials Science, Anderson, S. I., Bilde-Sorensen, J. B., Lorentzen, T., Pedersen, O. B., and Sorenson, N. J., eds., Riso National Lab, Roskilde, Denmark, pp. 33–44.
14. Graham, S., 1995, “The Stress State Dependence of Finite Inelastic Deformation Behavior of FCC Polycrystalline Materials,” Master’s thesis, Georgia Institute of Technology.
15. Hansen N. , and Juul JensenD. J., 1992, “Flow Stress Anisotropy Caused by Geometrically Necessary Boundaries,” Acta Met., Vol. 40, No. 12, pp. 3265–3275.10.1016/0956-7151(92)90040-L ↗
16. Havner, K. S., 1992, Finite Plastic Deformation of Crystalline Solids, Cambridge University Press, New York, NY.10.1017/CBO9780511526435 ↗
17. Hill R. , 1965, “A Self-Consistent Mechanics of Composite Materials,” J. Mech. Phys. Solids, Vol. 13, pp. 213213.10.1016/0022-5096(65)90010-4 ↗
18. Hughes D. A. , and HansenN., 1991, “Microstructural Evolution in Nickel During Rolling and Torsion,” Mater. Sci. Tech., Vol. 7, No. 6, pp. 544–553.10.1179/026708391790183736 ↗
19. Hughes, D. A., 1996, “The Development of High Angle Deformation Boundaries and Local Orientations in Aluminum,” Aluminum Alloys for Packaging II, J. G. Morris, S. K. Das and H. S. Goodrich, eds., The Minerals, Metals and Materials Society, pp. 129–144.
20. Hughes D. A. , LiuQ., ChrzanD. C., and HansenN., 1997, “Scaling of Microstructural Parameters and Misorientations of Deformation Induced Boundaries,” Acta. Mater., Vol. 45, No. 1, pp. 105–112.10.1016/S1359-6454(96)00153-X ↗
21. Hutchinson J. W. , 1976, “Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials,” Proc. R. Soc., London, Vol. A348, pp. 101–127.10.1098/rspa.1976.0027 ↗
22. Jonas, J. J., Canova, G. R., Shrivistava, S. C., and Christodoulou, N., 1981, “Sources of the Discrepancy Between the Flow Curves Determined in Torsion and in Axisymmetric Tension and Compression Testing,” Proceedings of The Workshop on Plasticity of Metals at Finite Strain: Theory, Experiment and Computation, Division of Applied Mechanics, Stanford University, Stanford, CA, pp. 206–222.
23. Kalidindi S. R. , BronkhorstC. A., and AnandL., 1992, “Crystallographic Texture Evolution in Bulk Deformation Processing of FCC Metals,” J. Mech. Phys. Solids, Vol. 40, No. 3, pp. 537–569.10.1016/0022-5096(92)80003-9 ↗
24. Kocks U. F. , StoutM. G., and RollettA. D., 1988, “The Influence of Texture on Strain Hardening,” Strength of Metals and Alloys, Vol. 1, pp. 25–34.10.1016/B978-0-08-034804-9.50008-5 ↗
25. Kocks, U. F., Kallend, J. S., Wank, H. R., Roller, A. D., and Wright, S. I., 1994, popLA, Preferred Orientation Package-Los Alamos, LANL LA-CC-89-18.
26. Kroner, E., 1958, “Kontinuumstheorie der Versetzungen und Eigenspannungen,” Springer-Verlag, Berlin.10.1007/978-3-642-94719-3 ↗
27. Miller M. , and DawsonP., 1997, “Influence of Slip System Hardening Assumptions on Modeling Stress Dependence of Work Hardening,” J. Mech. Phys. Solids, Vol. 45, No. 11/12, pp. 1781–1804.10.1016/S0022-5096(97)00029-X ↗
28. Molinari A. , CanovaG., and AhziS., 1987, “A Self-Consistent Approach of the Large Deformation Polycrystal Plasticity,” Acta Met., Vol. 35, p. 29832983.10.1016/0001-6160(87)90297-5 ↗
29. Nemat-Nasser, S., Mehrabadi, M. M., and Iwakuma, T., 1981, “On Certain Macroscopic and Microscopic Aspects of Plastic Flow of Ductile Materials,” Three-Dimensional Constitutive Relations and Ductile Fracture, S. Nemat-Nasser, ed., North-Holland Publ., pp. 147–172.
30. Nemat-Nasser S. , and ObataM., 1986, “Rate Dependent, Finite Elasto-Plastic Deformation of Polycrystals,” Proc. R. Soc., London, Vol. A407, p. 4545.10.1098/rspa.1986.0101 ↗
31. Peirce D. , AsaroR. J., and NeedlemanA., 1983, “An Analysis of Non-uniform and Localized Deformation in Ductile Single Crystals,” Acta Metall., Vol. 31, p. 19511951.
32. Rashid M. M. , and Nemat-NasserS., 1990, “A Constitutive Algorithm for Rate Dependent Crystal Plasticity,” Computer Methods in Applied Mechanics and Engineering, Vol. 94, pp. 201–228.10.1016/0045-7825(92)90147-C ↗
33. Rollet, A. D., Juul Jensen, D., and Stout, M. G., 1992, “Modelling the Effect of Microstructure on Yield Anisotropy,” Proc. 13th Ris0 Int. Symp. On Materials Science, S. I. Andersen et al., eds., Ris0 National Laboratory, Roskilde, Denmark, pp. 93–109.
34. Schro¨der J. , and MieheC., 1997, “Aspects of Computational Rate-Independent Crystal Plasticity,” Computational Materials Science, Vol. 9, pp. 168–176.10.1016/S0927-0256(97)00072-4 ↗
35. Stout, M. G., Kallend, J. S., Kocks, U. F., Przystupa, M. A., and Rollett, A. D., 1988, “Material Dependence of Deformation Texture Development in Various Deformation Modes,” Proc. 8th Int. Conf. On Textures of Materials (ICOTOM 8), J. S. Kallend and G. Gottstein, eds., the Metallurgical Society.
36. Taylor G. I. , and ElamC. F., 1925, “The Plastic Extension and Fracture of Aluminum Crystals,” Proc. Royal Soc., London, Vol. A108, p. 2828.10.1098/rspa.1925.0057 ↗
37. Taylor G. I. , 1938, “Plastic Strain in Metals,” J. Inst. Metals, Vol. 62, p. 307307.
38. Teodosiu, C., 1991, Anisotropy and Localization of Plastic Deformation, J. P. Boehler and A. S. Khan, eds., pp. 179–182.10.1007/978-94-011-3644-0_42 ↗