journal article·1981-04-01

Abrasive Wear in Machining: Experiments With Materials of Controlled Microstructure

S. Ramalingam, P. K. Wright

Publisher page

Abstract

Evidence is presented to show that hard inclusions in iron-base alloys degrade machinability by reducing cutting tool life. Machining experiments have been carried out on Fe-C-Silica and Fe-C-Alumina powder metal compacts containing varying amounts of abrasive. In addition, two stainless steels have been compared. One of these was titanium stabilized hence containing hard TiC particles; the other was unstabilized and free of such particles. In all these experiments the tool wear rate increased with volume fraction of hard inclusions. Abrasive wear mechanisms have been identified using detailed metallography. When machining with high-speed steels, rake face wear by abrasion occurs by a plastic plowing process and this is enhanced if the tool is thermally weakened. When machining with cemented carbide tools the results indicate that the temperatures in the crater region are high enough for the same plastic plowing of tool material to occur. By contrast, temperatures at the flank face are 300–400°C lower and the wear processes are of a different nature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Ga. 30332

Department of Mechanical Engineering, Carnegie-Mellon University, Pittsburgh, Pa. 15213

References

Reference metadata was not supplied for this record.