journal article·1995-10-01

Laminate Delamination Due to Thermal Gradients

J. W. Hutchinson, T. J. Lu

Publisher page

Abstract

Flaw-induced delamination of orthotropic laminates subject to through-thickness temperature gradients is analyzed. A crack-like flaw impedes heat flow through the laminate, producing thermal stresses and crack tip stress intensities. The focus is on delamination cracks which propagate under steady-state conditions. The steady-state analysis becomes accurate for a crack whose length is about one laminate thickness. Moreover, the analysis provides realistic fail-safe criteria for excluding delamination.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Applied Sciences, Harvard University, Cambridge, MA 02138

References (11)

Show source-provided references
1. Barber J. R. , 1979, “Steady-state Stress Caused by an Imperfectly Conducting Penny-Shaped Crack in an Elastic Solid,” J. Thermal Stresses, Vol. 3, pp. 77–83.10.1080/01495738008926954 ↗
2. Florence A. L. , and GoodierJ. N., 1959, “Thermal Stress at Spherical Cavities and Circular Holes in Uniform Heat Flow,” ASME Journal of Applied Mechanics, Vol. 26, pp. 293–294.10.1115/1.4011999 ↗
3. Florence A. L. , and GoodierJ. N., 1963, “The Linear Thermoelastic Problem of Uniform Heat Flow Disturbed by a Penny-Shaped Insulated Crack,” Int. J. Eng. Sci., Vol. 1, pp. 533–540.10.1016/0020-7225(63)90008-9 ↗
4. Hutchinson J. W. , and SuoZ., 1992, “Mixed Mode Cracking in Layered Materials,” Advances in Appl. Mech., Vol. 29, pp. 63–191.10.1016/S0065-2156(08)70164-9 ↗
5. Kuo A.-Y. , 1988, “Effects of Crack Surface Heat Conductance on Stress Intensity Factors,” ASME Journal of Applied Mechanics, Vol. 57, pp. 354–358.10.1115/1.2891996 ↗
6. Lu T. J. , and HutchinsonJ. W., 1995, “Effect of Matrix Cracking on the Overall Thermal Conductivity of Fiber-reinforced Composites,” Phil. Trans. Roy. Soc. Land., series A, Vol. 351, pp. 595–610.10.1098/rsta.1995.0055 ↗
7. Sih G. C. , 1962, “On the Singular Character of Thermal Stresses Near a Crack Tip,” ASME Journal of Applied Mechanics, Vol. 29, pp. 587–589.10.1115/1.3640612 ↗
8. Sih G. C. , ParisP. C., and IrwinG. R., 1965, “On Cracks in Reclilinearly Anisotropic Bodies,” Int. J. Frac. Mech., Vol. 1, pp. 189–203.10.1007/BF00186854 ↗
9. Sturla F. A. , and BarberJ. R., 1988, “Thermal Stresses Due to a Plane Crack in General Anisotropic Material,” ASME Journal of Applied Mechanics, Vol. 55, pp. 372–376.10.1115/1.3173685 ↗
10. Suo Z. , 1990, “Delamination Specimens for Orthotropic Materials,” ASME Journal of Applied Mechanics, Vol. 57, pp. 627–634.10.1115/1.2897068 ↗
11. Thangjitham S. , and ChoiH. J., 1993, “Thermal Stress Singularities in an Anisotropic Slab Containing a Crack,” Mech. Mater., Vol. 14, pp. 223–238.10.1016/0167-6636(93)90068-3 ↗