Mixed Mode Fracture Toughness of Engineering Materials
Source abstract
Abstract
The effect of mixed mode loading on the fracture toughness of engineering materials is rationalized in terms of the operative fracture mechanism as well as the deformation field ahead of the crack tip. It was found that mixed mode fracture is of utmost importance in materials which fail by stable ductile fracture caused by second phase particles, since in such materials there is a significant reduction in fracture toughness on mixed-mode loading. An autocatalytic shear localization-void formation mechanistic model was found to qualitatively explain the mixed mode fracture behavior in such materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical and Materials Engineering Department, Washington State University, Pullman, WA 99164-2920
References (27)
Show source-provided references
1. Anand L. , and SpitzigW. A., 1980, “Initiation of Localized Shear Bands in Plane Strain,” Journal of the Mechanics and Physics of Solids, Vol. 28, pp. 113–128.10.1016/0022-5096(80)90017-4 ↗
2. Asaro R. J. , and RiceJ. R., 1977, “Strain Localization in Ductile Single Crystals,” Journal of the Mechanics and Physics of Solids, Vol. 25, pp. 309–338.10.1016/0022-5096(77)90001-1 ↗
3. ASTM E-399, 1994, “Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials,” American Society for Testing and Materials, Vol. 3.01, pp. 407–437.
4. ASTM E-813, 1994, “Standard Test Method for JIC, A Measure of Fracture Toughness,” American Society for Testing and Materials, Vol. 3.01, pp. 628–642.
5. Broek, D. in Elementary Engineering Fracture Mechanics, 4th Revised Edition, 1986, Martinus Nijhoff Publishers.10.1007/978-94-009-4333-9 ↗
6. Dong P. , and PanJ., 1990, “Plane Strain Mixed-Mode Near Tip Fields in Elastic Perfectly Plastic Solids under Small Scale Yielding Conditions,” International Journal of Fracture, Vol. 45, pp. 243–262.10.1007/BF00036270 ↗
7. Feng X. , KumarA. M., and HirthJ. P., 1993, “Mixed Mode I/III Fracture Toughness of 2034 Aluminum Alloys,” Acta Metallurgica et Materialia, Vol. 41, pp. 2755–2764.10.1016/0956-7151(93)90144-H ↗
8. Gordon J. A. , HirthJ. P., KumarA. M., and MoodyN. E., 1992, “Effect of Hydrogen on the Mixed-Mode I/III Fracture Toughness of a High Purity Rotor Steel,” Metallurgical Transactions, Vol. 23A, pp. 1013–1020.10.1007/BF02675576 ↗
9. Graves, C., 1992, “Effects of Cobalt Content on the Mixed Mode I/III Fracture Toughness of WC-Co Alloys,” M. S. thesis, Washington State University.
10. Hutchinson J. W. , and TvergaardV., 1980, “Surface Instabilities on Statically Strained Plastic Solids,” International Journal of Mechanical Science, Vol. 22, pp. 339–354.10.1016/0020-7403(80)90051-X ↗
11. Hutchinson J. W. , and TvergaardV., 1981, “Shear Band Formation in Plane Strain,” International Journal of Solids and Structures, Vol. 17, pp. 451–470.10.1016/0020-7683(81)90053-6 ↗
12. Kamat S. V. , HirthJ. P., and MehrabianR., 1989, “Combined Mode I-Mode III Fracture Toughness of Alumina Particulate Reinforced Aluminum Alloy Matrix Composites,” Scripta Metallurgica, Vol. 23, pp. 523–528.10.1016/0036-9748(89)90444-4 ↗
13. Kamat, S. V., and Hirth, J. P., 1995, “Mixed Mode I/II Fracture Toughness of 2034 Aluminum Alloys,” Accepted for publication in Acta Metallurgica et Materialia.10.1016/1359-6454(95)00169-8 ↗
14. Kamat, S. V., and Hirth, J. P., 1995, “Effect of Aging on Mixed Mode I/III Fracture Toughness of 2034 Aluminum Alloys,” Accepted for publication in Acta Metallurgica et Materialia.10.1016/1359-6454(95)00223-5 ↗
15. Kumar, A., unpublished research, 1993.
16. Kumar A. M. , HirthJ. P., HoaglandR. G., and FengX., 1994, “A Suggested Test Procedure to Determine Mixed Mode I-III Fracture Toughness of Brittle Materials,” Journal of Testing and Evaluation, Vol. 22, pp. 327–334.10.1520/JTE11841J ↗
17. Lee T. D. , GoldenbergT., and HirthJ. P., 1979, Metallurgical Transactions, Vol. 14A, pp. 199–208.10.1007/BF02817629 ↗
18. Manoharan M. , HirthJ. P., and RosenfieldA. R., 1989, “Combined Mode I-Mode III Fracture of a High Carbon Steel,” Scripta Metallurgica, Vol. 23, pp. 763–766.10.1016/0036-9748(89)90527-9 ↗
19. Manoharan M. , RaghavacharyS., HirthJ. P., and RosenfieldA. R., 1989, “Fracture Surface Orientation under Mixed-Mode Loading,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 111, pp. 440–442.10.1115/1.3226493 ↗
20. Manoharan M. , HirthJ. P., and RosenfieldA. R., 1990, “A Suggested Test Procedure for Combined Mode I-Mode III Fracture Toughness Testing,” Journal of Testing and Evaluation, Vol. 18, pp. 106–114.10.1520/JTE12460J ↗
21. Manoharan M. , HirthJ. P., and RosenfieldA. R., 1991, “Combined Mode I-Mode III Fracture Toughness of a Spherodized 1090 Steel,” Acta Metallurgica et Materialia, Vol. 39, pp. 1203–1210.10.1016/0956-7151(91)90208-I ↗
22. Pan J. , and ShihC. F., 1990,“Elastic Plastic Analysis of Combined Mode I and III Crack Tip Fields under Small Scale Yielding Conditions,” Journal of the Mechanics and Physics of Solids, Vol. 38, pp. 161–181.10.1016/0022-5096(90)90032-Y ↗
23. Prasad, N. E., and Kamat, S. V., 1995, “Fracture Behavior of Quaternary Al-Li-Cu-Mg Alloy under Mixed Mode I/III Loading,” Accepted for publication in Metallurgical Transactions A.10.1007/BF02670770 ↗
24. Raghavachary S. , RosenfieldA. R., and HirthJ. P., 1990, “Mixed Mode 1/ III Fracture Toughness of an Experimental Rotor Steel,” Metallurgical Transactions, Vol. 21A, pp. 2539–2545.10.1007/BF02646999 ↗
25. Rice, J. R., and Johnson, M. A., 1969, “The Role of Large Crack Tip Geometry in Plane Strain Fracture,” Inelastic Behavior of Solids, M. F. Kanninen et al., eds., McGraw-Hill, NY, pp. 641–670.
26. Tvergaard V. , NeedlemanA., and LoK. K., 1981, “Flow Localization in the Plane Strain Tensile Test,” Journal of the Mechanics and Physics of Solids, Vol. 29, pp. 115–142.10.1016/0022-5096(81)90019-3 ↗
27. Xie S. X. , and HirthJ. P., 1982, “Permeation of Hydrogen, Trapping and Damage in Spherodized AISI 1090 Steel,” Corrosion, Vol. 38, pp. 486–493.10.5006/1.3577364 ↗