journal article·1995-01-01

ASME 1993 Nadai Lecture—Elastoplastic Stress and Strain Concentrations

William N. Sharpe

Publisher page

Abstract

Elastic stress concentration factors are familiar and easily incorporated into the design of components or structures through charts or finite element analysis. However when the material at the most concentrated location no longer behaves elastically, computation of the local stresses and strains is not so easy. Local elastoplastic behavior is an especially important consideration when the loading is cyclic. This paper summarizes the predictive capability of the Neuber and the Glinka models that relate gross loading to the local stresses and strains. The author and his students have used a unique laser-based technique capable of measuring biaxial strains over very short gage lengths to evaluate the two models. Their results, as well as those from earlier studies by other researchers using foil gages, lead to the general conclusion that the Neuber model works best when the local region is in a state of plane stress and the Glinka model is best for plane strain. There are intermediate levels of constraint that are neither plane stress nor plane strain. This paper presents a recommended practice for predicting the local elastoplastic stresses and strains for any constraint. First, one computes or estimates the initial elastic strains. Then, based on the amount of elastic constraint, one selects the appropriate model to compute the local elastoplastic stresses and strains.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Structural Load-Bearing Analysis · Engineering Structural Analysis Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, The Johns Hopkins University, Baltimore, MD 21218

References (35)

Show source-provided references
1. Box W. A. , 1951, “The Effect of Plastic Strains on the Stress Concentrations,” Proceedings of the Society for Experimental Stress Analysis, Vol. 8, pp. 99–110.
2. Budiansky, B., and Vidensek, J., 1955, “Analysis of the Stress in the Plastic Range Around a Circular Hole in a Plate Subjected to Uniaxial Tension,” NACA TN 3452.
3. Crews J. H. , and HardrathH. F., 1966, “A Study of Cyclic Plastic Stresses at a Notch Root,” Experimental Mechanics, Vol. 6, pp. 313–320.10.1007/BF02327511 ↗
4. Crews, Jr., J. H., 1969, “Elastoplastic Stress-Strain Behavior at Notch Roots in Sheet Specimens Under Constant-Amplitude Loading,” NASA TN D-5253.
5. Dowling N. E. , 1977, “Performance of Metal-Foil Strain Gages During Large Cyclic Strains,” Experimental Mechanics, Vol. 17, pp. 193–197.10.1007/BF02330997 ↗
6. Dowling, N. E., 1993, Mechanical Behavior of Materials, Prentice Hall, Englewood Cliffs, NJ.
7. Durelli A. J. , and SciammarellaC. A., 1963, “Elastoplastic Stress and Strain Distribution in a Finite Plate with a Circular Hole Subjected to Unidimensional Load,” ASME Journal of Applied Mechanics, Vol. 30, pp. 115–121.10.1115/1.3630055 ↗
8. Glinka G. , 1985, “Energy Density Approach to Calculation of Inelastic Strain-Stress near Notches and Cracks,” Engineering Fracture Mechanics, Vol. 22, pp. 485–508.10.1016/0013-7944(85)90148-1 ↗
9. Glinka G. , OttW., and NowackH., 1988, “Elastoplastic Plane Strain Analysis of Stresses and Strains at the Notch Root,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 110, pp. 195–204.10.1115/1.3226037 ↗
10. Griffith, G. E., 1948, “Experimental Investigation of the Effects of Plastic Flow in a Tension Panel with a Circular Hole,” NASA TN□ 1705.
11. Guillot M. W. , and SharpeW. N., 1983, “A Technique for Cyclic-Plastic Notch-Strain Measurement,” Experimental Mechanics, Vol. 23, pp. 354–360.10.1007/BF02319263 ↗
12. Hardrath, H. F., and Ohman, L., 1953, “A Study of Elastic and Plastic Stress Concentration Factors due to Notches and Fillets in Flat Plates,” NACA Report 1117.
13. Hoffman, T., and Seeger, T., 1985, Ermittlung und Beschriebung mehrachsiger Kerppeanspruchungen im nichtlinearen Berich, Heft 115, For schungskuratorium Machinenbau e. V. Frankfurt.
14. Hutchinson J. H. , 1968, “Singular Behavior at the End of a Tensile Crack in a Hardening Material,” Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 13–34.10.1016/0022-5096(68)90014-8 ↗
15. Johnson R. L. , 1976, “Measurement of Elastic-Plastic Stresses by Scattered-Light Photomechanics,” Experimental Mechanics, Vol. 16, pp. 201–208.10.1007/BF02329269 ↗
16. Krempl E. , 1968, “Evaluation of High-Elongation Foil Strain Gages for Measuring Cyclic Plastic Strains,” Experimental Mechanics, Vol. 8, pp. 19N–26N19N–26N.10.1007/BF02326045 ↗
17. Molski K. , and GlinkaG., 1981, “A Method of Elastic-Plastic Stress and Strain Calculation at a Notch Root,” Materials Science and Engineering, Vol. 50, pp. 93–100.10.1016/0025-5416(81)90089-6 ↗
18. Nadai A. , BaudR. V., and WahlA. M., 1930, “Stress Distribution and Plastic Flow in an Elastic Plate with a Circular Hole,” Mechanical Engineering, Vol. 52, No. 3, pp. 187–192.
19. Neal, S., Zachary, L. W., and Burger, C. P., 1978, “Three-Dimensional Stress Analysis of the SAE Keyhole Fatigue Specimen,” Technical Paper 780104, Society of Automotive Engineers.10.4271/780104 ↗
20. Neuber H. , 1961, “Theory of Stress Concentration for Shear-Strained Prismatical Bodies With Arbitrary Nonlinear Stress-Strain Law,” ASME Journal of Applied Mechanics, Vol. 28, pp. 544–550.10.1115/1.3641780 ↗
21. Papirno R. , 1971, “Plastic Stress-Strain History at Notch Roots in Tensile Strips under Monotonic Loading,” Experimental Mechanics, Vol. 11, pp. 446–452.10.1007/BF02327749 ↗
22. Perov S. N. , OgarevicV. V., and StephensR. I., 1993, “Application and Verification of Fatigue Life Calculation Methods for AZ91E-T6 Cast Magnesium Alloy Under Variable Amplitude Loading,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 115, pp. 385–390.10.1115/1.2904235 ↗
23. Sharpe W. N. , and WangK. C., 1991, “Evaluation of a Modified Neuber Relation,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 113, pp. 1–8.10.1115/1.2903378 ↗
24. Sharpe, W. N., Jr., Yang, C. H., and Tregoning, R. L., 1992, “An Evaluation of the Neuber and Glinka Relations for Monotonic Loading,” ASME Journal of Applied Mechanics, pp. S50-S56.10.1115/1.2899507 ↗
25. Stowell, E. Z., 1950, “Stress and Strain Concentration at a Circular Hole in an Infinite Plate,” NACA TN 2073.
26. Swain G. F. , ????, “Discussion,” Trans. ASME, Vol. 47, pp. 231–234.
27. Theocaris P. S. , 1962, “Experimental Solution of Elastic-Plastic Plane-Stress Problems,” ASME Journal of Applied Mechanics, Vol. 29, pp. 735–743.10.1115/1.3640662 ↗
28. Timoshenko S. , and DictzW., 1925, “Stress Concentration Produced by Holes and Fillets,” Trans. ASME, Vol. 47, pp. 199–200.10.1115/1.4058357 ↗
29. Timoshenko S. P. , 1953, “Stress Concentration in the History of Strength of Materials,” Proceedings of the Society for Experimental Stress Analysis, Vol. XII, No. 1, pp. 1–12.
30. Topper T. H. , WetzelR. M., and MorrowJ., 1969, “Neuber’s Rule Applied to Fatigue of Notched Specimens,” Journal of Materials, Vol. 4, pp. 200–209.
31. Tregoning, R. L., 1992, “The Influence of Geometrical Constraint on Cyclic, Elastoplastic, Notch Root Behavior and Fatigue Microcrack Initiation,” Ph.D. dissertation, The Johns Hopkins University.
32. Tuba, I. S., 1964, “Elastic-Plastic Stress and Strain Concentration,” Ph.D. dissertation, University of Pittsburgh, University Microfilms, 65-7946.
33. Walker E. K. , 1977, “Multiaxial Stress-Strain Approximations for Notch Fatigue Behavior,” Journal of Testing and Evaluation, Vol. 5, pp. 106–113.10.1520/JTE10670J ↗
34. Wang K. C. , and SharpeW. N., 1991, “Evaluation of a Modified Cyclic Neuber Relation,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 113, pp. 350–353.10.1115/1.2903417 ↗
35. Ward M. , and SharpeW. N., 1983, “Benchmark Cyclic Plastic Notch Strain Measurements,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 105, pp. 235–241.10.1115/1.3225652 ↗