On the Micromechanics-Based Simulation of Metal Matrix Composite Response
Source abstract
Abstract
The response of metal matrix composites is affected by factors such as inclusion distribution and shape, inclusion/matrix interfacial bond, residual stresses, and fabrication-altered in situ matrix properties. These effects are studied using a finite-volume micromechanics model whose extensive modeling capabilities are sufficient to account for these diverse factors. A consistent micromechanics-aided methodology is developed for extracting the unknown in situ matrix plastic parameters using a minimum amount of experimental data. Subsequent correlation of the micromechanics-based predictions with carefully generated data on off-axis response of unidirectional boron/aluminum composite specimens under tensile and compressive axial loading validates the model’s predictive capability and quantifies the importance of each factor.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Composite Material Mechanics · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Civil Engineering Department, University of Virginia, Charlottesville, VA 22904-4742
References (49)
Show source-provided references
1. Clyne10.1017/CBO9780511623080 ↗
2. Micromechanical Modeling of the Behavior of Ductile Materials Including Particles10.1016/S0927-0256(97)00053-0 ↗
3. Microstructural Factors Controlling the Strength and Ductility of Particle Reinforced Metal-Matrix Composites10.1016/S0022-5096(97)00038-0 ↗
4. Particle Fracture Simulation in Nonuniform Microstructures of Metal-Matrix Composites10.1016/S1359-6454(97)00289-9 ↗
5. Homogenization of Two-Phase Elasto-Plastic Composite Materials and Structures—Study of Tangent Operators, Cyclic Plasticity and Numerical Algorithms10.1016/S0020-7683(03)00013-1 ↗
6. Assessment of Particle Clustering in MMCs by Quantitative Image Analysis
7. Effect of Fabrication Techniques on the Properties of Carbon Nanotubes Reinforced Magnesium10.4028/www.scientific.net/SSP.111.179 ↗
8. Investigation of Interfacial Interaction Between Uncoated and Coated Carbon Fibres and the Magnesium Alloy AZ91
9. Adaptivity and Convergence in the Voronoi Cell Finite Element Model for Analyzing Heterogeneous Materials10.1016/S0045-7825(99)00349-7 ↗
10. A Multi-Level Computational Model for Multiscale Damage Analysis in Composite and Porous Materials10.1016/S0020-7683(00)00167-0 ↗
11. On the Capabilities of Mean-Field Approaches for the Description of Plasticity in Metal Matrix Composites10.1016/j.ijplas.2004.07.001 ↗
12. Micromechanical Modeling and Computation of Elastic-Plastic Materials Reinforced With Distributed-Orientation Fibers10.1016/j.ijplas.2004.09.003 ↗
13. Influence of Fiber’s Shape and Size on Overall Elastoplastic Property for Micropolar Composites10.1016/j.ijsolstr.2005.06.057 ↗
14. Residual Stress and Its Effect on Yielding in SiC∕Ti Plate10.1299/jsmea.49.25 ↗
15. Effect of Matrix Hardening on the Tensile Strength of Alumina Fiber-Reinforced Aluminum Matrix Composites10.1016/j.actamat.2006.01.044 ↗
16. Plastic Deformation of Continuous Fiber-Reinforced Metal-Matrix Composites: Effects of Fiber Shape and Distribution10.1016/0956-716X(90)90264-H ↗
17. Deformation of Metal Matrix Composites With Continuous Fibers: Geometric Effects of Fiber Distribution and Shape10.1016/0956-7151(91)90274-5 ↗
18. Influence of Fiber Architecture on the Inelastic Response of Metal Matrix Composites10.1016/S0749-6419(96)00018-6 ↗
19. The Influence of Particle Distribution on the Mechanical Response of a Particulate Metal Matrix Composite10.1016/0956-7151(94)90147-3 ↗
20. Effect of Particle Distribution on Deformation and Damage of Two-Phase Alloys10.1016/S0921-5093(01)01168-6 ↗
21. Mechanical Characterization of Unnotched SCS6/Ti-15-3 Metal Matrix Composites at Room Temperature
22. Creep-Rupture Lifetime Simulation of Unidirectional Metal Matrix Composites With and Without Time-Dependent Fiber Breakage10.1016/S0749-6419(01)00038-9 ↗
23. Stress Relaxation in Broken Fibers in Unidirectional Composites: Modeling and Application to Creep Rupture Analysis10.1016/S0749-6419(98)00063-1 ↗
24. Linear Thermoelastic Higher-Order Theory for Periodic Multiphase Materials10.1115/1.1381005 ↗
25. Higher-Order Theory for Periodic Multiphase Materials With Inelastic Phases10.1016/S0749-6419(02)00007-4 ↗
26. see also: NASA CR2004-213043.10.1115/1.1831294 ↗
27. Finite-Volume Direct Averaging Micromechanics of Heterogeneous Materials With Elastic-Plastic Phases10.1016/j.ijplas.2005.04.012 ↗
28. Theory of Elasticity of a Multilayered Medium10.1007/BF00046464 ↗
29. Local/Global Stiffness Matrix Formulation for Composite Materials and Structures10.1016/0961-9526(91)90028-Q ↗
30. Becker, W., Pindera, M-J., and Herakovich, C. T., 1987, “Mechanical Response of Unidirectional Boron/Aluminum Under Combined Loading,” CCMS-87-06, VPI-E-87–17, Center for Composite Materials and Structures, Virginia Polytechnic Institute and State University, Blacksburg, Virginia.
31. Shear Characterization of Unidirectional Composites With the Off-Axis Tension Test10.1007/BF02319962 ↗
32. A Methodology for Accurate Shear Characterization of Unidirectional Composites10.1177/002199838702101205 ↗
33. Pindera · 19
34. Micromechanics of Off-Axis Loading of Metal Matrix Composites Using Finite Element Analysis10.1016/S0020-7683(00)00248-1 ↗
35. Micromechanical Analysis of Composites by the Generalized Method of Cells10.1016/0167-6636(92)90010-B ↗
36. A Two-Dimensional, Higher-Order, Elasticity-Based Micromechanics Model10.1016/j.ijsolstr.2004.06.057 ↗
37. Achenbach10.1007/978-3-7091-4313-1 ↗
38. Elastic Properties of Reinforced Solids: Some Theoretical Principles10.1016/0022-5096(63)90036-X ↗
39. Mendelson
40. Cavalcante, M. A. A., Marques, S. P. C., and Pindera, M-J., 2007, “Parametric Formulation of the Finite-Volume Theory for Functionally Graded Materials. Part I: Analysis, Part II: Numerical Results,” J. Applied Mechanics, in press.10.1115/1.2722313 ↗
41. Transformation Field Analysis of Inelastic Composite Materials10.1098/rspa.1990.0120 ↗
42. Herakovich
43. An Analytical Model for the Inelastic Axial Shear Response of Unidirectional Metal Matrix Composites10.1016/S0749-6419(97)00011-9 ↗
44. A Coupled Incremental Damage and Plasticity Theory for Metal Matrix Composites10.1515/JMBM.1996.6.3.193 ↗
45. Micromechanical Analysis of the Elastoplastic Response of Metal Matrix Composites10.1115/1.3265656 ↗
46. Nonlinear Response of Unidirectional Boron/Aluminum10.1177/002199839002400101 ↗
47. Aboudi
48. The Effect of Matrix Microstructure on Thermally-Induced Residual Stresses in SiC/Titanium Aluminide Composites10.1115/1.2904276 ↗
49. Application of Finite Strain Viscoplasticity to Polymeric Fiber Composites10.1016/j.ijplas.2005.06.004 ↗