journal article·1996-10-01

High Temperature Densification Forming of Alumina Powder—Constitutive Model and Experiments

Y. S. Kwon, K. T. Kim

Publisher page

Abstract

Densification and grain growth of alumina powder compacts were investigated under pressureless sintering, sinter forging, and hot pressing. A set of constitutive equations by Kwon et al. was used to predict densification under diffusional creep. A novel grain growth equation is proposed by generalizing the grain growth model of Wilkinson and Ca´ceres to predict grain growth during densification forming process of ceramic powders under general loading states. Material parameters in the constitutive equations were determined from experimental data under pressureless sintering and sinter forging. Theoretical predictions by using the constitutive equations for creep densification and grain growth were compared with experimental data of alumina powder compacts.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Pohang University of Science and Technology, Pohang 790-784, Korea

References (25)

Show source-provided references
1. Arzt E. , AshbyM. F., and EasterlingK. E., 1983, “Practical Application of Hot-Isostatic Pressing Diagrams: Four Case Studies,” Metall. Trans., Vol. 14A, pp. 211–221.10.1007/BF02651618 ↗
2. Ashby, M. F., Background Reading, HIP 6.0, University of Cambridge, Cambridge, U.K., 1990.
3. Besson J. , and AbouafM., 1991, “Grain Growth Enhancement in Alumina During Hot Isostatic Pressing,” Acta Metall. Mater., Vol. 39, pp. 2225–2234.10.1016/0956-7151(91)90004-K ↗
4. Besson J. , and AbouafM., 1992, “Rheology of Porous Alumina and Simulation of Hot Isostatic Pressing,” J. Am. Ceram. Soc, Vol. 75, pp. 2165–2172.10.1111/j.1151-2916.1992.tb04479.x ↗
5. Coble R. L. , 1961, “Sintering Crystalline Solids. II. Experimental Test of Diffusion Models in Powder Compacts,” J. Appl. Phys., Vol. 32, pp. 793–799.10.1063/1.1736108 ↗
6. Coble R. L. , 1970, “Diffusion Models for Hot Pressing with Surface Energy and Pressure Effects as Driving Force,” J. Appl. Phys., Vol. 41, pp. 4798–4807.10.1063/1.1658543 ↗
7. Cocks A. C. F. , 1994, “The Structure of Constitutive Laws for the Sintering of Fine Grained Materials,” Acta Metall. Mater., Vol. 42, pp. 2191–2210.10.1016/0956-7151(94)90299-2 ↗
8. Du Z.-Z. , and CocksA. C. F., 1992, “Constitutive Models for the Sintering of Ceramic Components—I. Material Models,” Acta Metall. Mater., Vol. 40, pp. 1969–1979.10.1016/0956-7151(92)90183-F ↗
9. Fridez, J. D., Carry, C., and Mocellin, A., 1984, “Effects of Temperature and Stress on Grain-Boundary Behavior in Fine-Grained Alumina,” Advances in Ceramics, W. D. Kingery, eds., The American Ceramic Society, Columbus, Ohio, pp. 720–740.
10. Helle A. S. , EasterlingK. E., and AshbyM. F., 1985, “Hot-Isostatic Pressing Diagrams: New Developments,” Acta Metall., Vol. 33, pp. 2163–2174.10.1016/0001-6160(85)90177-4 ↗
11. Hsueh C. H. , EvansA. G., CannonR. M., and BrookR. J., 1986, “Viscoelastic Stresses and Sintering Damage in Heterogeneous Powder Compacts,” Acta Metall., Vol. 34, pp. 927–936.10.1016/0001-6160(86)90066-0 ↗
12. Kwon Y. S. , SonG., SuhJ., and KimK. T., 1994, “Densification and Grain Growth of Porous Alumina Compacts,” J. Am. Ceram. Soc, Vol. 77, pp. 3137–3141.10.1111/j.1151-2916.1994.tb04561.x ↗
13. Kwon Y. S. , and KimK. T., 1996, “Densification Forming of Alumina Powder—Effects of Power-law Creep and Friction,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 118, published in this issue pp. 471–477.10.1115/1.2805944 ↗
14. Ma Y. , and BowmanK. J., 1991, “Texture in Hot-Pressed or Forged Alumina,” J. Am. Ceram. Soc, Vol. 74, pp. 2941–2944.10.1111/j.1151-2916.1991.tb06870.x ↗
15. McMeeking R. M. , and KuhnL. T., 1992, “A Diffusional Creep Law for Powder Compacts,” Acta Metall. Mater., Vol. 40, pp. 961–969.10.1016/0956-7151(92)90073-N ↗
16. Pan J. , and CocksA. C. F., 1994a, “A Constitutive Models for Stage 2 Sintering of Fine Grained Materials—I. Grain-Boundaries Act as Perfect Sources and Sinks for Vacancies,” Acta Metall. Mater., Vol. 42, pp. 1215–1222.10.1016/0956-7151(94)90138-4 ↗
17. Pan J. , and CocksA. C. F., 1994b, “A Constitutive Models for Stage 2 Sintering of Fine Grained Materials—II. Effects of An Interface Reaction,” Acta Metall. Mater., Vol. 42, pp. 1223–1230.10.1016/0956-7151(94)90139-2 ↗
18. Rahaman M. N. , De JongheL. C., and BrookR. J., 1986, “Effect of Shear Stress on Sintering,” J. Am. Ceram. Soc, Vol. 69, pp. 53–58.10.1111/j.1151-2916.1986.tb04693.x ↗
19. Reed, J. S., Introduction to the Principles of Ceramic Processing, Wiley, New York, 1988.
20. Schwartz, M. M., Handbook of Structural Ceramics, McGraw-Hill, New York, 1992.
21. Uematsu K. , ItakuraK., UchidaN., SaitoK., MiyamotoA., and MiyashitaT., 1990, “Hot Isostatic Pressing of Alumina and Examination of the Hot Isostatic Pressing Map,” J. Am. Ceram. Soc, Vol. 73, pp. 74–78.10.1111/j.1151-2916.1990.tb05093.x ↗
22. Venkatachari K. R. , and RajR., 1986a, “Shear Deformation and Densification of Powder Compacts,” J. Am. Ceram. Soc, Vol. 69, pp. 499–506.10.1111/j.1151-2916.1986.tb07452.x ↗
23. Venkatachari K. R. , and RajR., 1986b, “Superplastic Flow in Fine-Grained Alumina,” J. Am. Ceram. Soc, Vol. 69, pp. 135–138.10.1111/j.1151-2916.1986.tb04717.x ↗
24. Wilkinson D. S. , and Ca´ceresC. H., 1984, “On the Mechanism of Strain-Enhanced Grain Growth During Superplastic Deformation,” Acta Metall., Vol. 32, pp. 1335–1345.10.1016/0001-6160(84)90079-8 ↗
25. Xue L. A. , and ChenI.-W., 1990, “Deformation and Grain Growth of Low-Temperature-Sintered High-Purity Alumina,” J. Am. Ceram. Soc, Vol. 73, pp. 3518–3521.10.1111/j.1151-2916.1990.tb06489.x ↗