Effect of Geometry and Materials on Residual Stress Measurement in Thin Films by Using the Focused Ion Beam
Source abstract
Abstract
Recently, a new method for residual stress measurement in thin films by using the focused ion beam (FIB) has been proposed by the authors. It is based on the combined capability of the FIB imaging system and of high-resolution strain mapping software (VIC-2D). A simple equation based on two-dimensional elasticity is used to evaluate the residual stress from the displacements due to introducing a slot. The slot length is assumed to be much larger than the slot width or depth. And the effect of the slot width was neglected. However, it is often hard, depending on film materials, to introduce a narrow and deep slot by FIB. In this work some practical issues regarding the slot geometry are addressed. Through two- and three-dimensional finite element analyses, it is explored how the slot length, width and measurement location affect the displacements which are the basic data for residual stress evaluation. As a result, the validity and limit of the equations based on two-dimensional elasticity are evaluated. Also, the effect of material dissimilarity between film and substrate is explored. Finally, examples for a diamond-like carbon film on glass substrate and an aluminum oxide film thermally grown upon an alloy are presented.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Chonnam National University, Kwangju, 500-757, Korea
Princeton Materials Institute, Princeton University, Princeton, NJ 08540
References (32)
Show source-provided references
1. Masubuchi, K., 1980, Analysis of Welded Structures, Pergamon, New York.
2. Cheng, W., and Finnie, I., 1990, “The Crack Compliance Method for Residual Stress Measurement,” Weld. World, 28, pp. 103–110.
3. Cheng, W., and Finnie, I., 1991, “An Experimental Method for Determining Residual Stresses in Welds,” Modeling of Casting, Welding and Advanced Solidfication Processes—V, The Minerals Metals and Materials Soc., pp. 337–342.
4. Cheng, W., and Finnie, I., 1993, “Measurement of Residual Stresses Distributions Near the Toe of an Attachment Welded on a Plate Using the Crack Compliance Method,” Eng. Fract. Mech., 46, pp. 79–92.10.1016/0013-7944(93)90305-C ↗
5. Cheng, W., Finnie, I., and Prime, M. B., 1992, “Measurement of Residual Stresses Through the Thickness of a Strip Using the Crack-Compliance Method,” Residual Stresses—III Science and Technology, edited by H. Fujiwara, T. Abe, and K. Tanaka, Elsevier, Amsterdam, 2, pp. 1127–1132.
6. Cheng, W., and Finnie, I., 1994, “An Overview of the Compliance Method for Residual Stress Measurement,” Proc. Fourth Int. Conf. Residual Stress, Baltimore MD, Soc. for Exp. Mech., pp. 449–458.
7. Kang, K. J., Song, J. H., and Earmme, Y. Y., 1989, “A Method for the Measurement of Residual Stresses Using a Fracture Mechanics Approach,” J. Strain Anal. Eng. Des., 24, pp. 23–30.10.1243/03093247V241023 ↗
8. Kang, K. J., and Choi, S. R., 1993, “Residual Stress Measurement for Circular Disk Using Fracture Mechanics Approach,” Trans. Korean Soc. Mech. Eng., 17, pp. 1218–1226 (in Korean).
9. Kang, K. J., and Seol, S. Y., 1996, “Measurement of Residual Stresses in a Circular Ring Using the Successive Cracking Method,” ASME Trans. J. Eng. Mater. Technol., 118, pp. 217–223.10.1115/1.2804890 ↗
10. Prime, M. B. , 1999, “Residual Stress Measurement by Successive Extension of a Slot: The Crack Compliance Method,” Appl. Mech. Rev., 52, pp. 75–96.10.1115/1.3098926 ↗
11. Kang, K. J., Yao, N., He, M. Y., and Evans, A. G., 2003, “A Method for In-Situ Measurement of the Residual Stress in Thin Films by Using the Focused Ion Beam,” Thin Solid Films, 443, pp. 71–77.10.1016/S0040-6090(03)00946-5 ↗
12. Noyan, I. C., and Cohen, J. B., 1987, Residual Stress Measurement by Diffraction and Interpretation, Springer, Berlin, pp. 166–181.
13. Vosberg, V. R., Clemens, D., Berger, M. G., Fisher, W., and Nickel, H., 1997, “Stress in Alumina Scales on High-Temperature Alloys Measured by X-ray and Optical Methods,” Fresenius' J. Anal. Chem., 358, pp. 127–130.10.1007/s002160050362 ↗
14. Lipkin, D. M., and Clarke, D. R., 1996, “Measurement of the Stress in Oxide Scales Formed by Oxidation of Aluminum-Containing Alloys,” Oxid. Met., 45, pp. 267–280.10.1007/BF01046985 ↗
15. Ma, Q., and Clarke, D. R., 1993, “Optical Fluorescence From Chromium Ions in Sapphire: A Probe of the Image Stress,” Acta Metall. Mater., 41, pp. 1811–1816.10.1016/0956-7151(93)90201-3 ↗
16. Cho, S. J., Lee, K. R., Eun, K. Y., Hahn, J. H., and Ko, D. H., 1999, “Determination of Elastic Modulus and Poisson’s Ratio of Diamond-Like Carbon Films,” Thin Solid Films, 341, pp. 207–210.10.1016/S0040-6090(98)01512-0 ↗
17. Witvrouw, A., and Spaepen, F., 1993, “Determination of the Plane Stress Elastic Constants of Thin Films From Substrate Curvature Measurements: Applications to Amorphous Metals,” J. Appl. Phys., 73, pp. 7344–7350.10.1063/1.354025 ↗
18. Tsui, T. T., Oliver, W. C., and Pharr, G. M., 1996, “Influences of Stress on the Measurement of Mechanical Properties Using Nanoindentation: Part I. Experimental Studies in an Aluminum Alloy,” J. Mater. Res., 11, pp. 752–759.10.1557/JMR.1996.0091 ↗
19. Suresh, S., and Gianakopoulos, A. E., 1998, “A New Method of Estimating Residual Stress by Instrumented Sharf Indentation,” Acta Mater., 46, pp. 5755–5767.10.1016/S1359-6454(98)00226-2 ↗
20. Lee, Y. H., and Kwon, D., 2002, “Residual Stresses in DLC/Si and Au/Si Systems: Application of a Stress Relaxation Model to the Nanoindentation Technique,” J. Mater. Res., 17, pp. 901–906.10.1557/JMR.2002.0131 ↗
21. Zhang, T. Y., Su, Y. J., Qian, C. F., Zhao, M. H., and Chen, L. Q., 2000, “Microbridge Testing of Silicon Oxide/Silicon Nitride Bilayer Films Deposited on Silicon Wafers,” Acta Mater., 48, pp. 4901–4915.10.1016/S1359-6454(00)00290-1 ↗
22. Denhoff, M. W. , 2003, “A Measurement of Young’s Modulus and Residual Stress in MEMS Bridges Using a Surface Profiler,” J. Micromech. Microeng., 13, pp. 686–692.10.1088/0960-1317/13/5/321 ↗
23. Kim, J. H., Kim, J. G., Hahn, J. H., Lee, H. Y., and Kim, Y. H., 2003, “Nano-Bending Method to Identify the Residual Stresses of MEMS Films,” NANOTECH 2003, San Francisco, CA, 23–27 Feb., pp. 468–473.
24. Sutton, M. A., Cheng, M., Peters, W. H., Chaou, Y. J., and McNeill, S. R., 1986, “Application of an Optimized Digital Correlation Method to Planar Deformation Analysis,” Image Vis. Comput., 4, pp. 143–151.10.1016/0262-8856(86)90057-0 ↗
25. Schreier, H. W., Braasch, J. R., and Sutton, M. A., 2000, “Systematic Errors in Digital Image Correlation Caused by Gray-Value Interpolation,” Opt. Eng. (Bellingham), 39, pp. 2915–2921.10.1117/1.1314593 ↗
26. Hutchinson, J. W., and Suo, Z., 1992, “Mixed Mode Cracking in Layered Materials,” Adv. Appl. Mech., 29, pp. 63–191.10.1016/S0065-2156(08)70164-9 ↗
27. Moon, M. W., Jensen, H. M., Hutchinson, J. W., Oh, K. H., and Evans, A. G., 2002, “The Characterization of Telephone Cord Buckling of Compressed Thin Films on Substrates,” J. Mech. Phys. Solids, 50, pp. 2355–2377.10.1016/S0022-5096(02)00034-0 ↗
28. Jensen, H. M., and Thouless, M. D., 1995, “Buckling Instability of Straight Edge Cracks,” J. Appl. Mech., 62, pp. 620–625.10.1115/1.2895991 ↗
29. Hutchinson, J. W. , 2001, “Delamination of Compressed Films on Curved Substrates,” J. Mech. Phys. Solids, 49, pp. 1847–1864.10.1016/S0022-5096(01)00029-1 ↗
30. Moon, M. W., Chung, J. W., Lee, K. R., Oh, K. H., Wang, R., and Evans, A. G., 2002, “An Experimental Study of the Influence of Imperfections on the Buckling of Compressed Thin Films,” Acta Mater., 50, pp. 1219–1227.10.1016/S1359-6454(01)00423-2 ↗
31. Cho, S. J., Lee, K. R., Eun, K. Y., Hahn, J. H., and Ko, D. H., 1999, “Determination of Elastic Modulus and Poisson’s Ratio of Diamond-Like Carbon Films,” Thin Solid Films, 341, pp. 207–210.10.1016/S0040-6090(98)01512-0 ↗
32. Tolpygo, V. K., Dryden, J. R., and Clarke, D. R., 1998, “Determination of the Growth Stress and Strain in α-Al2O3 Scales During the Oxidation of Fe-22Cr-4.8Al-0.3Y Alloy,” Acta Mater., 46, pp. 927–937.10.1016/S1359-6454(97)00306-6 ↗