journal article·1998-01-01

Serrated Flow and Surface Markings in Aluminum Alloys

Ming Li, Daniel J. Lege

Publisher page

Abstract

Serrated flow and associated progressive surface markings severely restrict the application of some aluminum sheet alloys for automotive body exteriors. This paper attempts to approach the phenomenon from the localization theory of continuum mechanics as well as from the classical atomistic and dislocation considerations. Plane strain tension tests were conducted for a commercial Al-Mg alloy (5182-O) at different strain rates and temperatures, and the local temperature changes were measured by an infrared thermal imaging system. Continuum mechanics analysis provided the insight into the myth that band surface markings never appear under biaxial tension strain states. In addition, continuum mechanics analysis shed light on the observation that PLC bands were not seen on the surface of plane strain tension specimens even though the stress-strain curves exhibited serrations. Finally, it is emphasized that only by combining the efforts of continuum mechanics at the macroscale and materials science at the microscale, can a complete understanding of the phenomenon be reached.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Mechanics and Microstructure Center, Alcoa Technical Center, Alcoa Center, PA 15069-0001

References (45)

Show source-provided references
1. Baird, J. D., 1971, “The Effects of Strain-Aging due to Interstitial Solutes on the Mechanical Properties of Metals,” Metallurgical Reviews, pp. 1–19.10.1179/mtlr.1971.16.1.1 ↗
2. Barlat, F., and Brem, J., 1991, “Uniaxial and Iosipescu Shear Tests on 2090 Aluminum Alloy,” unpublished work, Alcoa Technical Center.
3. Brindley B. J. , and WorthingtonP. J., 1969, “Serrated Yielding in Aluminum-3% Magnesium,” Acta Metallurgica, Vol. 17, pp. 1357–1361.10.1016/0001-6160(69)90153-9 ↗
4. Brindley B. J. , and WorthingtonP. J., 1970, “Yield-point Phenomena in Substitutional Alloys,” Metallurgical Reviews, Vol. 15, pp. 101–114.10.1179/mtlr.1970.15.1.101 ↗
5. Carlson J. M. , and BirdJ. E., 1987, “Thermal and Strain Rate Softening in Al-Mg Sheet during Necking and Shear Band Formation,” Metallurgical Transactions A, Vol. 18, pp. 1154–1156.10.1007/BF02668568 ↗
6. Charnock W. , 1968, “The Influence of grain Size on the Nature of Portevin-Le Chatelier Yielding,” The Philosophical Magazine, Vol. 18, pp. 89–99.10.1080/14786436808227311 ↗
7. Chen M. C. , ChenL. H., and LuiT. S., 1996, “Analysis on the Amplitude of Serrated Flow Associated with the Portevin-Le Chatelier Effect of Substitutional fcc Alloys,” Metallurgical and Materials Transactions A, Vol. 27A, pp. 1691–1694.10.1007/BF02649826 ↗
8. Clausing D. P. , 1970, “Effect of Plastic Strain State on Ductility and Toughness,” International Journal of Fracture Mechanics, Vol. 6(1), pp. 71–85.10.1007/BF00183662 ↗
9. Cottrell A. H. , 1953, “A note on the Portevin-Le Chatelier Effect,” The Philosophical Magazine, Vol. 44, pp. 829–832.10.1080/14786440808520347 ↗
10. Cuddy L. J. , and LeslieW. C., 1972, “Some Aspects of Serrated Yielding in Substitutional Solid Solutions of Iron,” Acta Metallurgica, Vol. 20, pp. 1157–1167.10.1016/0001-6160(72)90164-2 ↗
11. Dillon O. W. , 1963, “Experimental Data on Aluminum as a Mechanically Unstable Solid,” Journal of the Mechanics and Physics of Solids, Vol. 11, pp. 289–304.10.1016/0022-5096(63)90032-2 ↗
12. Drucker D. C. , 1995, “From Instability and Time Dependence on the Microscale to Stability and Time Independence on the Macroscale,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 117, pp. 368–372.10.1115/1.2804727 ↗
13. Drucker, D. C., and Li, M., 1992, “Non-associated Plastic Deformation and Genuine Instability,” Acta Mechanica [suppl] 3: Advances in Dynamic Systems and Stability Beskos D. E., and Ziegler F., eds., Springer-Verlag, pp. 161–171.10.1007/978-3-7091-9223-8_12 ↗
14. Drucker D. C. , and LiM., 1993, “Triaxial Test Instability of a Non-associated Flow Rule Model,” ASCE, Journal of Engineering Mechanics, Vol. 119 (6), pp. 1188–1204.10.1061/(ASCE)0733-9399(1993)119:6(1188) ↗
15. Estrin Y. , and KubinL. P., 1988, “Plastic Instabilities: Classification and Physical Mechanisms,” Res Mechanica, Vol. 23, pp. 197–221.
16. Estrin, Y., and Kubin, L. P., 1995, “Spacial Coupling and Propagative Plastic Instabilities,” Continuum Models for Materials with Micro-Structure, Mu¨hlhaus, H. B., ed., Wiley.
17. Estrin Y. , and McCormickP. G., 1991, “Modeling the Transient Flow Behavior of Dynamic Strain Ageing Materials,” Acta Metallurgica et Materialia, Vol. 39 (12), pp. 2977–2983.10.1016/0956-7151(91)90030-5 ↗
18. Hahner P. , 1993a, “Modeling of Propagative Plastic Instabilities,” Scripta Metallurgica et Materialia, Vol. 29, pp. 1171–1176.10.1016/0956-716X(93)90104-Z ↗
19. Hahner P. , 1993b, “Modeling the Spatio-temporal Aspects of the Portevin-Le Chatelier Effect,” Materials Science and Engineering A, Vol. A163, pp. 23–24.10.1016/0921-5093(93)90640-Z ↗
20. Ham R. K. , and JaffreyD., 1967, “Dislocation Multiplication, Vacancy Accumulation, and the Onset of Jerky Flow during Forward and Reversed Strain in Cu-3.2 at % Sn,” The Philosophical Magazine, Vol. 15, pp. 247–256.10.1080/14786436708227697 ↗
21. Hill R. , and HutchinsonJ. W., 1975, “Bifurcation Phenomena in the plane Tension Test,” Journal of the Mechanics and Physics of Solids, Vol. 23, pp. 239–264.10.1016/0022-5096(75)90027-7 ↗
22. King J. E. , YouC. P., and KnottJ. F., 1981,“Serrated Yielding and the Localized Shear Failure Mode in Aluminum Alloys,” Acta Metallurgical, Vol. 29, pp. 1553–1566.10.1016/0001-6160(81)90037-7 ↗
23. Korbel A. , and DybiecH., 1981, “The Problem of the Negative Strain-Rate Sensitivity of Metals under the Portevin-Le Chatelier Deformation Conditions,” Acta Metallurgica, Vol. 29, pp. 89–93.10.1016/0001-6160(81)90089-4 ↗
24. Kubin L. P. , 1994 “Strain and Strain Rate Softening Instabilities: Length Scales and Spatial Couplings,” Key Engineering Materials, Vol. 97–98, pp. 219–234.10.4028/www.scientific.net/KEM.97-98.219 ↗
25. Kubin L. P. , and EstrinY., 1985,“The Portevin-Le Chatelier Effect in Deformation with Constant Stress Rate,” Acta Metallurgica, Vol. 33, pp. 397–407.10.1016/0001-6160(85)90082-3 ↗
26. Kubin L. P. , and EstrinY., 1990, “Evolution of Dislocation Densities and the Critical Conditions for the Portevin-Le Chatelier Effect,” Acta Metallurgica, Vol. 38, pp. 697–708.10.1016/0956-7151(90)90021-8 ↗
27. Li M. , and DruckerD. C., 1994, “Instability and Bifurcation of a Nonassociated Extended Mises Model in the Hardening Regime,” Journal of the Mechanics and Physics of Solids, Vol. 42(12), pp. 1883–1904.10.1016/0022-5096(94)90017-5 ↗
28. Marciniak Z. , and KuczynskiK., 1967, “Limit Strains in the Processes of Stretch Forming Sheet Metal,” International Journal of Mechanical Science, Vol. 9, pp. 609–620.10.1016/0020-7403(67)90066-5 ↗
29. McCormick P. G. , 1971, “The Portevin-Le Chatelier Effect in Al-Mg-Si Alloy,” Acta Metallurgica, Vol. 19, pp. 463–471.10.1016/0001-6160(71)90170-2 ↗
30. McCormick P. G. , 1988, “Theory of Localization due to Dynamic Strain Ageing,” Acta Metallurgica, Vol. 36, pp. 3061–3067.10.1016/0001-6160(88)90043-0 ↗
31. Militzer M. , SunW. P., and JonasJ. J., 1994,“Modeling the Effect of Deformation-Induced Vacancies on Segregation and Precipitation,” Acta Metallurgica et Materialia, Vol. 42 (1), pp. 133–141.10.1016/0956-7151(94)90056-6 ↗
32. Penning P. , 1972, “Mathematics of the Portevin-Le Chatelier Effect,” Acta Metallurgica, Vol. 20, pp. 1169–1175.10.1016/0001-6160(72)90165-4 ↗
33. Pink E. , 1989, “The Effect of Precipitates on Characteristics of Serrated Flow in AlZn5Mg1,” Acta Metallurgica, Vol. 37(7), pp. 1773–1781.10.1016/0001-6160(89)90062-X ↗
34. Pink E. , and GrinbergA., 1981, “Serrated Flow in a Ferritic Stainless Steel,” Material Science and Engineering, Vol. 51, pp. 1–8.10.1016/0025-5416(81)90099-9 ↗
35. Pink E. , and GrinbergA., 1984, “Practical Aspects of the Portevin-Le Chatelier Effect (II),” Aluminum, Vol. 60E (10), pp. 646–650.
36. Rice, J. R., 1977, “The Localization of Plastic Deformation,” Theoretical and Applied Mechanics, Proc. 14th IUTAM, Koiter W. T., eds. North-Holland, Amsterdam, pp. 207–220.
37. Rodriguez P. , 1984, “Serrated Plastic Flow,” Bulletin of Material Science, Vol. 6(4), pp. 653–663.10.1007/BF02743993 ↗
38. Robinson J. M. , 1994, “Serrated Flow in Aluminum Base Alloys,” International Materials Reviews, Vol. 39(6), pp. 217–227.10.1179/imr.1994.39.6.217 ↗
39. Robinson J. M. , and ShawM. P., 1992, “The Influence of Specimen Geometry on the Portevin-Le Chatelier Effect in an Al-Mg Alloy,” Materials Science and Engineering A, Vol. A159, pp. 159–165.10.1016/0921-5093(92)90284-8 ↗
40. Robinson J. M. , and ShawM. P., 1994, “Microstructural and Mechanical Influence on Dynamic Strain Aging Phenomena,” International Materials Reviews, Vol. 39(3), pp. 113–122.10.1179/imr.1994.39.3.113 ↗
41. Rudnicki J. W. , and RiceJ. R., 1975, “Conditions for the Localization of Deformation in Pressure-Sensitive Dilatant Materials,” Journal of the Mechanics and Physics of Solids, Vol.23, pp. 371–394.10.1016/0022-5096(75)90001-0 ↗
42. Sharpe W. N. , 1966, “The Portevin-Le Chatelier Effect in Aluminum Single Crystals and Polycrystals,” Journal of the Mechanics and Physics of Solids, Vol. 14, pp. 187–202.10.1016/0022-5096(66)90029-9 ↗
43. Sto¨ren S. , and RiceJ. R., 1975, “Localized Necking in Thin Sheet,” Journal of the Mechanics and Physics of Solids, Vol. 23, pp. 421–441.10.1016/0022-5096(75)90004-6 ↗
44. Taha P. , GrafA., and HosfordW., 1995, “Plane-Strain Tension Tests on Aluminum Alloy Sheet,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 117, pp. 168–171.10.1115/1.2804524 ↗
45. Worthington P. J. , and BrindleyB. J., 1969, “Serrated Yielding in Substitutional Alloys,” The Philosophical Magazine, Vol. 19, pp. 1175–1178.10.1080/14786436908228642 ↗