journal article·2011-07-01

Modifications of the Polylactic Acid Surface Properties by DBD Plasma Treatment at Atmospheric Pressure

C. Vergne, O. Buchheit, F. Eddoumy, E. Sorrenti, J. Di Martino, D. Ruch

Publisher page

Abstract

In this study, nitrogen plasma treatment at atmospheric pressure was used to modify the surface of polylactic acid (PLA), especially its low surface energy and wettability, which do not favor the interface adhesion with another material when blended. The dielectric barrier discharge (DBD) configuration was selected. Treatment time was varied, and induced chemical and topographical surface modifications were assessed. Attention was first focused on the effect of the treatment duration on the hydrophilicity and the topography of PLA. Results showed that plasma treatment enhanced the PLA surface hydrophilicity. The overall surface roughness was also found to be increased. Moreover, both properties rose with increasing treatment time. Thus, according to the Wenzel’s relation, the surface roughening contributed to the enhancement of the PLA hydrophilicity generated by plasma treatment. Then, the chemical surface changes induced by specific plasma activation were studied. Analyses pointed out the incorporation of hydrophilic groups such as nitrogen functional species after treatment. The stability of this treatment under air was also investigated: measurements showed that the hydrophobic recovery mainly occurred the first hours of storage.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Advanced Materials and Structures, Centre de Recherche Public Henri Tudor, 66 Rue de Luxembourg, L-4221 Esch-sur-Alzette, Luxembourg

References (27)

Show source-provided references
1. Evaluation of Poly(lactic acid) and Sugar Beet Pulp Green Composites10.1007/s10924-006-0038-z ↗
2. Mechanical Properties of Biodegradable Composites From Poly Lactic Acid (PLA) and Microcrystalline Cellulose (MCC)10.1002/app.v97:5 ↗
3. Biodegradable Polymer Blends of Poly(L-Lactic Acid) and Gelatinized Starch10.1002/pen.v40:12 ↗
4. Improving Polylactide/Starch Biocomposites by Grafting Polylactide With Acrylic Acid—Characterization and Biodegradability Assessment10.1002/mabi.v5:4 ↗
5. Plasma Surface Modification of Poly(D,L-Lactic Acid) as a Tool to Enhance Protein Adsorption and the Attachment of Different Cell Types10.1002/jbm.b.31068 ↗
6. Improvement of Cell Adhesion on Poly(L-Lactide) by Atmospheric Plasma Treatment10.1002/jbm.a.v77a:1 ↗
7. Plasma Surface Modification of Poly (L-Lactic Acid) and Poly (Lactic-Co-Glycolic Acid) Films for Improvement of Nerve Cells Adhesion10.1016/j.radphyschem.2007.05.013 ↗
8. Maleation of Polylactide (PLA) by Reactive Extrusion10.1002/(SICI)1097-4628(19990425)72:4<>1.0.CO;2-V ↗
9. Treatment of Polymer Films With a Dielectric Barrier Discharge in Air, Helium and Argon at Medium Pressure10.1016/j.surfcoat.2007.01.008 ↗
10. Attachment, Growth, and Activity of Rat Osteoblasts on Polylactide Membranes Treated With Various Low-Temperature Radiofrequency Plasmas10.1002/jbm.a.v76a:2 ↗
11. Comparative Studies on Surface Modification of Poly(Ethylene Terephthalate) by Remote and Direct Argon Plasmas10.1002/1097-4628(20010131)79:5<>1.0.CO;2-S ↗
12. Influence of Ambient Conditions on the Ageing Behaviour of Plasma-Treated PET Surfaces10.1016/j.nimb.2008.03.167 ↗
13. Improving Cell Affinity of Poly(D,L-Lactide) Film Modified by Anhydrous Ammonia Plasma Treatment10.1002/pat.v13:3/4 ↗
14. Effects of DBD Plasma Operating Parameters on the Polymer Surface Modification10.1016/j.surfcoat.2004.01.024 ↗
15. Different Ways to Plasma-Polymerize HMDSO in DBD Configuration at Atmospheric Pressure for Corrosion Protection10.1002/ppap.200800052 ↗
16. Investigation of the Hydrophobic Recovery of Various Polymeric Biomaterials After 172 nm UV Treatment Using Contact Angle, Surface Free Energy and XPS Measurements10.1016/j.apsusc.2008.11.034 ↗
17. Contact Angles, Work of Adhesion, and Interfacial Tensions at a Dissolving Hydrocarbon Surface10.1016/0021-9797(87)90280-3 ↗
18. Polypropylene Natural Aging Studied by X-Ray Photoelectron Spectroscopy10.1016/S0368-2048(00)00121-3 ↗
19. Briggs · 52
20. Stout · 167
21. ISO 13565–2: 1996, “Geometrical Product Specifications (GPS)—Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties—Part 2: Height Characterization Using the Linear Material Ratio Curve,” www.iso.org
22. Surface Modification of Polyethylene Powder by Nitrogen and Ammonia Low Pressure Plasma in a Fluidized Bed Reactor10.1016/j.reactfunctpolym.2004.06.003 ↗
23. Water Absorption and Degradation Characteristics of Chitosan-Based Polyesters and Hydroxyapatite Composites10.1002/mabi.v7:3 ↗
24. Wettability Enhancement by Rough Surfaces Generated by Thin Film Technology10.1016/S0040-6090(03)00484-X ↗
25. XPS and Contact Angle Study of N2 and O2 Plasma-Modified PTFE, PVDF and PVF Surfaces10.1002/sia.v38:4 ↗
26. Surface Engineering of Poly(Lactic Acid) by Entrapment of Modifying Species10.1021/ma9916133 ↗
27. Modification of the Surface Properties of a Polypropylene (PP) Film Using an Air Dielectric Barrier Discharge Plasma10.1016/S0169-4332(01)01035-2 ↗