Nanoindentation Measurements on Low-k Porous Silica Thin Films Spin Coated on Silicon Substrates
Source abstract
Abstract
MEMS (MicroElectroMechanical Systems) are composed of thin films and composite nanomaterials. Although the mechanical properties of their constituent materials play an important role in controlling their quality, reliability, and lifetime, they are often found to be different from their bulk counterparts. In this paper, low-k porous silica thin films spin coated on silicon substrates are studied. The roughness of spin-on coated porous silica films is analyzed with in-situ imaging and their mechanical properties are determined using nanoindentation. A Berkovich type nanoindenter, of a 142.3 deg total included angle, is used and continuous measurements of force and displacements are acquired. It is shown, that the measured results of hardness and Young’s modulus of these films depend on penetration depth. Furthermore, the film’s mechanical properties are influenced by the properties of the substrate, and the reproduction of the force versus displacement curves depends on the quality of the thin film. The hardness of the studied low-k spin coated silica thin film is measured as 0.35∼0.41 GPa and the Young’s modulus is determined as 2.74∼2.94 GPa.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical & Aerospace Engineering Department, 98 Brett Road, Rutgers, The State University of New Jersey, Piscataway, NJ 08854, USA
References (17)
Show source-provided references
1. Trimmer, W. S., 1996, Micromechanics and MEMS: Classic and Seminar Papers to 1990, IEEE Press, Piscatawy, NJ.10.1109/9780470545263 ↗
2. Stokes, R. J., and Evans, D. F., 1997, Fundamentals of Interfacial Engineering, Wiley-VCH, Inc.
3. Murakami, Y., Tanaka, K., Itokazu, M., and Shimamoto, A., 1994, “Elastic Analysis of Triangular Pyramidal Indentation by the Finite-Element Method and its Application to Nano-Indentation Measurement of Glasses,” Philos. Mag. A, 69(6), pp. 1131–1153.10.1080/01418619408242244 ↗
4. Larsson, P. L., Giannakopoulos, A. E., Soderlund, E., Rowcliffe, D. J., and Vestergaard, R., 1996, “Analyis of Berkovich Indentation,” Int. J. Solids Struct., 33(2), pp. 221–248.10.1016/0020-7683(95)00033-7 ↗
5. Pethica, J. B., Hutchings, R., and Oliver, W. C., 1983, “Hardness Measurement at Penetration Depths as Small as 20 nm,” Philos. Mag. A, 48(4), pp. 593–606.10.1080/01418618308234914 ↗
6. Doerner, M. F., and Nix, W. D., 1986, “A Method for Interpreting the Data From Depth Sensing Indentation Instruments,” J. Mater. Res., 1(4), pp. 601–609.10.1557/JMR.1986.0601 ↗
7. Oliver, W. C., and Pharr, G. M., 1992, “An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments,” J. Mater. Res., 7(6), pp. 1564–1583.10.1557/JMR.1992.1564 ↗
8. Bertrand-Lambotte, P., Loubet, J. L., Verpy, C., and Pavan, S., 2001, “Nano-Indentation, Scratching and Atomic Force Microscopy for Evaluating the Mar Resistance of Automotive Clearcoats: Study of the Ductile Scratches,” Thin Solid Films, 398–399, pp. 306–312.10.1016/S0040-6090(01)01377-3 ↗
9. Bamber, M. J., Cooke, K. E., Mann, A. B., and Derby, B., 2001, “Accurate Determination of Young’s Modulus and Poisson’s Ratio of Thin Films by a Combination of Acoustic Microscopy and Nanoindentation,” Thin Solid Films, 398–399, pp. 299–305.10.1016/S0040-6090(01)01341-4 ↗
10. Chou, W.-J., Yu, G.-P., and Huang, J.-H., 2002, “Mechanical Properties of TiN Thin Film Coatings on 304 Stainless Steel Substrates,” Surf. Coat. Technol., 149, pp. 7–13.10.1016/S0257-8972(01)01382-2 ↗
11. Barshilia, H. C., and Rajam, K. S., 2002, “Characterization of Cu/Ni Multilayer Coatings by Nanoindentation and Atomic Force Microscopy,” Surf. Coat. Technol., 155(2–3), pp. 195–202.10.1016/S0257-8972(02)00008-7 ↗
12. Hyun, S. H., Kim, T. Y., Kim, G. S., and Park, H. H., 2000, “Synthesis of Low-k Porous Silica Films via Freeze Drying,” J. Mater. Sci. Lett., 19, pp. 1863–1866.10.1023/A:1006775213914 ↗
13. Quesant Instrument Corporation, 2002, “Q-Scope 350 Operator’s Manual,”
14. Simpson, G. J., Sedin, D. L., and Rowlen, K. L., 1999, “Surface Roughness by Contact Versus Tapping Mode Atomic Force Microscopy,” Langmuir, 15, pp. 1429–1434.10.1021/la981024a ↗
15. Elam, J. W., Sechrist, Z. A., and George, S. M., 2002, “ZnO/Al2O3 Nanolaminates Fabricated by Atomic Layer Deposition: Growth and Surface Roughness Measurements,” Thin Solid Films, 414, pp. 43–55.10.1016/S0040-6090(02)00427-3 ↗
16. Mesarovic, S. D., and Fleck, N. A., 1999, “Spherical Indentation of Elastic-Plastic Solids,” Proc. R. Soc. London, Ser. A, 455, pp. 2707–2728.10.1098/rspa.1999.0423 ↗
17. Hysitron Inc., 2002, “TriboScope Nanomechanical Testing System—User’s Manual.”