journal article·2006-01-01

Analysis of Interfacial Debonding in Three-Dimensional Composite Microstructures

Shriram Swaminathan, N. J. Pagano, Somnath Ghosh

Publisher page

Abstract

This paper is aimed at analyzing stresses and fiber-matrix interfacial debonding in three-dimensional composite microstructures. It incorporates a 3D cohesive zone interface model based element to simulate interfacial debonding in the commercial code ABAQUS. The validated element is used to examine the potential debonding response in the presence of fiber–fiber interactions. A two-fiber model with unidirectional fibers is constructed and the effect of relative fiber spacing and volume fraction on the stress distribution in the matrix is studied. In addition, the effect of fiber orientation and spacing on the nature of initiation and propagation of interfacial debonding is studied in a two-fiber model. These results are expected to be helpful in formulating future studies treating optimal fiber orientations and payoff in controlling fiber spacing and alignment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Composite Material Mechanics · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering The Ohio State University Columbus, OH 43210

AFRL/MLBC, Wright-Patterson AFB, OH 45433-7750

Department of Mechanical Engineering, The Ohio State University, Columbus, OH 43210

References (27)

Show source-provided references
1. On the Effect of Debonding on the Overall Behavior of Composite Materials10.1016/S0167-6636(00)00010-7 ↗
2. Thermoelastic Properties of Fiber Composites with Imperfect Interface10.1016/0167-6636(90)90051-G ↗
3. Modeling of Imperfect Bonding in Fiber Reinforced Brittle Matrix Composites10.1016/0167-6636(90)90029-F ↗
4. Elastic Moduli of Brittle Matrix Composites with Interfacial Debonding10.1016/S0020-7683(96)00003-0 ↗
5. A Continuum Model for Void Nucleation by Interfacial Debonding10.1115/1.3173064 ↗
6. An Analysis of Decohesion Along an Imperfect Interface10.1007/BF00018611 ↗
7. Micromechanical Modeling of Interfacial Decohesion10.1016/0304-3991(92)90117-3 ↗
8. Effect of Fiber Debonding in a Whisker-Reinforced Metal10.1016/0921-5093(90)90170-8 ↗
9. Fiber Debonding and Breakage in a Whisker Reinforced Metal10.1016/0921-5093(95)80005-0 ↗
10. Interfacial De-bonding in Multiple Fiber-Reinforced Composites10.1016/S0167-6636(00)00030-2 ↗
11. Debonding in Composite Microstructures with Morphological Variations10.1142/S0219876204000034 ↗
12. Formulation of a Three-Dimensional Cohesive Zone Model for Application to a Finite Element Algorithm10.1016/S0045-7825(99)00211-X ↗
13. Micro-Mechanical Analysis of Continuous Fiber Metal Matrix Composite Including the Effects of Matrix Visco-Plasticity and Evolving Damage
14. Modeling of Delamination Damage Evolution on Laminated Composites Subjected to low Velocity Impact10.1177/105678959400300405 ↗
15. Numerical Modeling of Damage Development and Viscoplasticity in Metal Matrix Composites10.1016/0045-7825(95)00810-N ↗
16. Finite Deformation Effects in Homogeneous and Interfacial Fracture10.1016/0020-7683(94)00174-U ↗
17. Computational Modeling of Impact Damage in Brittle Materials10.1016/0020-7683(95)00255-3 ↗
18. Finite-Deformation Irreversible Cohesive Element for Three-Dimensional Crack-Propagation Analysis10.1002/(SICI)1097-0207(19990330)44:9<1267::AID-NME486>3.0.CO;2-7 ↗
19. Scheider, Ingo , 2001, “Cohesive Model for Crack Propagation Analyses of Structures with Elastic-Plastic Material Behavior: Foundations and Implementation,” GKSS Research Center, Geesthacht.
20. A New Three-Dimensional Interface Finite Element to Simulate Fracture in Composites10.1016/j.ijsolstr.2004.01.007 ↗
21. Abaqus, 2001, “User’s Manual,” Hibbit, Karlsson, and Sorensen, Inc.
22. Adaptivity and Convergence in the Voronoi Cell Finite Element Model for Analyzing Heterogeneous Materials10.1016/S0045-7825(99)00349-7 ↗
23. Concurrent Multi-Scale Analysis of Elastic Composites by a Multi-Level Computational Model10.1016/j.cma.2003.10.007 ↗
24. A Model for Analysis of Arbitrary Composite and Porous Microstructures with Voronoi Cell Finite Elements10.1002/(SICI)1097-0207(19960730)39:14<2363::AID-NME958>3.0.CO;2-D ↗
25. Some Issues in the Application of Cohesive Zone Models for Metal Ceramic Interfaces10.1016/S0020-7683(02)00149-X ↗
26. Raghavan, P., and Ghosh, S., “A Continuum Damage Mechanics Model for Unidirectional Composites Undergoing Interfacial Debonding,” Mech. Mater.0167-6636 (in press).
27. Adaptive Multi-Scale Computational Modeling of Composite Materials