Relaxation of Peening Residual Stresses Due to Cyclic Thermo-Mechanical Overload
Source abstract
Abstract
Shot-peening induced residual stresses can be relaxed due to cyclic loading. This relaxation plays an important role in determining the fatigue life of the peened components. It is therefore the purpose of this study to conduct comprehensive three-dimensional dynamic elasto-plastic finite element analysis of the joint peening treatment and relaxation process. In this regard, a novel symmetry cell is developed and used to model the multiple impact indentations resulting from multiple impingements of a cluster of shots. The model was further extended to integrate the relaxation resulting from cyclic loading at stresses above the yield strength of the material. This integrated model accounts for the main features of both stages by considering strain-rate effects, shot and target inertia and the dependence of the mechanical properties of the target material on temperature. A wide spectra of cyclic mechanical and thermal loads as well as their combinations is considered and the resulting relaxed residual stress field is determined. As an application, the model was used to predict the residual stress relaxation in a high-strength steel target made from AISI 4340 under different peening and thermomechanical cyclic overload.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Industrial Engineering, University of Toronto, 5 King’s College Road, Toronto, Ontario, M5S 3G8 Canada Tel: (416) 978-5741
School of Mechanical and Production Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798
References (31)
Show source-provided references
1. Fuchs, H. O., 1962, Shot-peening effects and specifications, ASTM STP-196.
2. Meguid, S. A., 1986, editor, Impact Surface Treatment, Elsevier Applied Science Publishers, New York.
3. Shaw, M. C., and De Salvo, G., 1970, “On the plastic flow beneath a blunt axi-symmetric indentor,” ASME J. Eng. Ind., 92, pp. 480–494.10.1115/1.3427786 ↗
4. Meguid, S. A., and Klair, M. S., 1985, “An examination of the relevance of co-indentation studies to incomplete coverage in shot-peening using the finite-element method,” J. Mech. Work. Technol., 11, pp. 87–104.10.1016/0378-3804(85)90114-7 ↗
5. Meguid, S. A., and Klair, M. S., 1985, “Elasto-plastic co-indentation analysis of a bounded solid using finite element method,” Int. J. Mech. Sci., 27, pp. 157–168.10.1016/0020-7403(85)90056-6 ↗
6. Li, A. K., Yao, M., Wang, D., and Wang, R., 1991, “Mechanical approach to the residual stress field induced by shot-peening,” Mater. Sci. Eng., A, 147, pp. 167–173.10.1016/0921-5093(91)90843-C ↗
7. Johnson W., 1972, Impact Strength of Materials, Arnold, London.
8. Iida K., 1984, “Dent and affected layer produced by shot peening,” Second International Conference on Shot Peening, Chicago, USA, pp. 217–227.
9. Edberg J., Lindgren L., and Mori K., 1995, “Shot peening simulated by two different finite element formulations,” Simulation of Materials Processing: Theory, Methods and Applications, edited by Shen and Dawson, Balkema, Rotterdam, pp. 425–430.
10. Meguid, S. A., Shagal, G., Stranart, J. C., and Daly, J., 1999, “Three-dimensional dynamic finite element analysis of shot-peening induced residual stresses,” Finite Elem. Anal. Design, 31, pp. 179–191.10.1016/S0168-874X(98)00057-2 ↗
11. Meguid, S. A., Shagal, G., and Stranart, J. C., 1999, “Finite element modelling of shot-peening residual stresses,” Mater. Processing Technol., 92-93, pp. 401–404.10.1016/S0924-0136(99)00153-3 ↗
12. Schiffner, K., and Droste gen. Helling, C., 1999, “Simulation of residual stresses by shot peening,” Comput. Struct., 72, pp. 329–340.10.1016/S0045-7949(99)00012-7 ↗
13. Meguid, S. A., Shagal, G., and Stranart, J. C., 2002, “3D FE analysis of peening of strain-rate sensitive materials using multiple impingement model,” Int. J. Impact Eng., 27, pp. 119–134.10.1016/S0734-743X(01)00043-4 ↗
14. Mattson, R. L., and Colemal, Jr., W. S., 1954, “Effect of shot-peening variables and residual stresses on fatigue life of leaf spring specimens,” Trans. Soc. Automotive Eng., 62, pp. 546–556.10.4271/540262 ↗
15. Morrow, J., and Sinclair, G. M., 1958, “Cycle-dependent stress relaxation,” Symposium on Basic Mechanisms of Fatigue, ASTM STP 237, American Society for Testing and Materials.10.1520/STP39312S ↗
16. James, M. R., 1982, “The relaxation of residual stresses during fatigue. Residual stress and stress relaxation,” edited by Kula, E., Weiss, V., in Proceedings of the 28th Army Materials Research Conference, Plenum Press, New York, pp. 297–314.10.1007/978-1-4899-1884-0_16 ↗
17. Jhansale H. R., and Topper T. H., 1973, “Engineering analysis of the inelastic stress response of a structural metal under variable cyclic strains,” Cyclic Stress-strain Behavior-Analysis, Experimentation, and Failure Prediction, American Society for Testing and Materials, pp. 246–270.10.1520/STP38034S ↗
18. Kodama, S., 1972, “The behavior of residual stress during fatigue stress cycles,” in Proceedings of the International Conference on Mechanical Behavior of Metals II, Society of Material Science, Kyoto, 2, pp. 111–118.
19. Iida, K., Yamamoto, S., and Takanashi, M., 1997, “Residual stress relaxation by reversed loading,” Weld. World, 93(3), pp. 138–144.
20. Holzapfel, H., Schulze, V., Vo¨hringer, O., and Macherauch, E., 1998, “Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures,” Mater. Sci. Eng., A, 248, pp. 9–18.10.1016/S0921-5093(98)00522-X ↗
21. Torres, M. A. S., and Voorwald, H. J. C., 2002, “An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel,” Int. J. Fatigue, 24, pp. 877–886.10.1016/S0142-1123(01)00205-5 ↗
22. Smith, D. J., Farrahi, G. H., Zhu, W. X., and McMahon, C. A., 2001, “Experimental measurement and finite element simulation of the interaction between residual stresses and mechanical loading,” Int. J. Fatigue, 23, pp. 293–302.10.1016/S0142-1123(00)00104-3 ↗
23. Zhuang, W. Z., and Halford, G. R., 2001, “Investigation of residual stress relaxation under cyclic load,” Int. J. Fatigue, 23, pp. S31–S37S31–S37.10.1016/S0142-1123(01)00132-3 ↗
24. ANSYS, 2002, User’s manual, Ver. 6.1, ANSYS Inc.
25. Everett, R. Jr., Newman, J. Jr., and Phillips, E., 1999, “On the effects of a machining-like scratch on the fatigue life of 4340 steel,” in Proceedings of the 55th Ann. Forum of the Amer. Helicopter Society, Montreal, Quebec, 1, pp. 316–327.
26. Premack, T., and Douglas, A. S., 1995, “Three-dimensional analysis of the impact fracture of 4340 steel,” Int. J. Solids Struct., 32(17-18), pp. 2793–2812.10.1016/0020-7683(94)00295-8 ↗
27. Batra, R. C., Zhang, X., and Wright, T. W., 1995, “Critical strain ranking of 12 materials in deformations involving adiabatic shear bands,” Trans. ASME, J. Appl. Mech., 62, pp. 252–254.10.1115/1.2895918 ↗
28. Lee, W. S., and Yeh, G. W., 1997, “The plastic deformation behavior of AISI 4340 alloy steel subjected to high temperature and high strain rate loading conditions,” J. Mater. Process. Technol., 71, pp. 224–234.10.1016/S0924-0136(97)00079-4 ↗
29. Bodner, S. R., and Symonds, P. S., 1979, “Experiments on dynamic plastic loading of frames,” Int. J. Solids Struct., 15, pp. 1–13.10.1016/0020-7683(79)90039-8 ↗
30. Chaboche, J. L., and Jung, O., 1998, “Application of a kinematic hardening viscoplasticity model with thresholds to the residual stress relaxation,” Int. J. Plast., 13(10), pp. 785–807.10.1016/S0749-6419(97)00066-1 ↗
31. Kobayashi, M., and Nobutada, O., 2002, “Implementation of cyclic plasticity models based on a general form of kinematic hardening,” Int. J. Numer. Methods Eng., 53, pp. 2217–2238.10.1002/nme.384 ↗