journal article·2008-07-01

Detection and Monitoring of Corrosion in Structural Carbon Steels Using Electromagnetic Sensors

F. Rumiche, J. E. Indacochea, M. L. Wang

Publisher page

Abstract

An electromagnetic sensor was assessed as a possible instrument for nondestructive detection and monitoring of corrosion in structural carbon steels. In this study, the magnetic response of three structural carbon steel rods (AISI 1018, AISI 1045, and AISI 1045-High Mn), was evaluated in the as-received (uncorroded) and corroded conditions. Initially, the material was systematically machined out from each steel rod, followed by the magnetic evaluation of each specimen. Other set of metal rods were exposed to uniform corrosion and later examined by the electromagnetic sensor. Correlations have been established between the degree of mass loss and magnetic response of the test specimen. Based on the results, it can be said that the electromagnetic sensor has the potential to be used as a reliable nondestructive tool to detect corrosion at early stages based on the variation in magnetic properties. A metallurgical analysis of all test rods was also undertaken, which showed that microstructures have an important effect of the magnetic properties of the steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Materials Engineering, University of Illinois at Chicago, 842 West Taylor Street, Chicago, IL 60607

References (17)

Show source-provided references
1. Koch, G. H., Brongers, M. P., Thompson, N. G., Virmani, Y. P., and Payer, J. H., 2002, “Corrosion Cost and Preventive Strategies in the United States,” Federal Highway Administration, Technical Report No. FHWA-RD-01-156.
2. A Time-Temperature Relationship for Rupture and Creep Stresses10.1115/1.4015909 ↗
3. Koontz, S. , 2000, “Magnetoelastic Measurement of Permeability for Non-destructive Testing Force Monitoring in Prestressed Cables,” MS thesis, Department of Civil and Materials Engineering, University of Illinois at Chicago.
4. Hovorka, O. , 2002, “Measurement of Hysteresis Curves for Computational Simulation of Magnetoelastic Stress Sensors,” MS thesis, Department of Civil and Materials Engineering, University of Illinois at Chicago.
5. Singh, V. , 2003, “Measurement of Corrosion of Steel Reinforcement by Electromagnetic Non-destructive Evaluation Technique,” Ph.D. thesis, Department of Civil and Materials Engineering, University of Illinois at Chicago.
6. Early Corrosion Detection by Magnetoelastic Techniques and Electrochemical Impedance Spectroscopy
7. Magnetic Sensor Used for the Determination of Fatigue State in Ferromagnetic Steels
8. Magnetic Nondestructive Evaluation of Thermally Degraded 2.25Cr–1Mo Steel10.1016/S0167-577X(03)00422-1 ↗
9. Magnetostrictive Sensors for the Characterization of Corrosion in Rebars and Prestressing Strands10.1117/12.259151 ↗
10. Detection of Fractures Wires in Steel Cables Using Magnetostrictive Sensors
11. ASTM International, 1994, “Standard Test Method for Corrosion Test for Engine Coolants in Glassware,” Report No. ASTM D1384.
12. Magnetic Barkhausen Noise and Hysteresis Loop in Commercial Carbon Steel: Influence of Applied Stress and Grain Size10.1016/S0304-8853(01)00066-X ↗
13. Magnetic Properties and Microstructure of AISI 1000 Series Carbon Steels10.1088/0022-3727/21/7/022 ↗
14. Barkhausen Effect in Steels and Its Dependence on Surface Condition10.1063/1.364516 ↗
15. Effect of Surface Mechanical Changes on Magnetic Barkhausen Emissions10.1109/20.619651 ↗
16. Thermal Behavior of Magnetic Stress Sensors at Different Reynolds Numbers
17. Kimura, M., and Kihira, H., 2005, “Nanoscopic Mechanism of Protective Rust Formation on Weathering Steel Surfaces,” Nippon Steel, Technical Report No. 91.