journal article·2009-04-01

Control of 3003-H18 Aluminum Ultrasonic Consolidation

M. Kulakov, H. J. Rack

Publisher page

Abstract

Ultrasonic consolidation of 150 μm thick 3003-H18 aluminum foil to a 3003-H18 build plate has been investigated. The effects of the normal load, vibrational amplitude, and sonotrode velocity on consolidation quality as characterized by the total linear weld density (LWD) including both edge and edge defects were examined utilizing two sequential three-level full factorial design of experiments at a constant build plate temperature of 150°C. These showed that the normal load and the vibrational amplitude have a significant influence on LWD, while the sonotrode rotational velocity has only a marginal effect. The formation of edge defects at the foil-build plate interface has been attributed to the nonuniform strain state across the foil width, while the central defects were related to sonotrode-foil contact pressure variations following the sonotrode pattern. In addition, LWD variations in ±10–20% were attributed to a nonuniform sonotrode-foil contact pressure distribution. Finally, representation of the total LWD as a function of the control parameters indicates that high total linear weld densities can be achieved with a control space bounded by high normal loads and intermediate to high vibrational amplitudes. Consideration of only central defects expands this control space allowing utilization of lower normal loads and vibrational amplitudes to achieve similar linear weld densities.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Clemson University, Clemson, SC 29634

References (6)

Show source-provided references
1. White, D. R. , 2003, “Ultrasonic Consolidation of Aluminum Tooling,” Adv. Mater. Process., 161, pp. 64–65.
2. Optimum Process Parameters for Ultrasonic Consolidation of 3003 Aluminum10.1016/j.jmatprotec.2003.10.016 ↗
3. Effect of Process Parameters on Bond Formation During Ultrasonic Consolidation of Aluminum Alloy 300310.1016/S0278-6125(07)80011-2 ↗
4. Off · 28
5. Kulakov, M., and Rack, H. J., “Surface Damage During Ultrasonic Consolidation of 3003-H18 Aluminum,” Rapid Prototyping J., in press. 1355-2546
6. Harris · 116