journal article·2002-01-01

Bicrystal-Based Modeling of Plasticity in FCC Metals

B. J. Lee, S. Ahzi, D. M. Parks

Publisher page

Abstract

In this paper, intermediate modeling of polycrystalline plasticity is proposed for rigid viscoplatic large deformations. This approach is based on the use of a bicrystal as the elementary local element representing the polycrystal. The local homogenization is obtained by considering the bicrystal volume-averaging and the jump conditions at the assumed planar interface between the two crystals. Two interaction laws based on Taylor and Sachs type assumptions are proposed. These bicrystal-based averaging schemes are different from the classical Taylor and Sachs models since they allow for stresses and strains to vary from one single crystal to the other. We simulate uniaxial tension and compression as well as plane strain compression tests. Results in terms of stress-strain curves are shown in comparison to those of the pure Taylor and Sachs models. We also show results for texture evolution and discuss their comparison with the experimental measurements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Material Mechanics · Metal Forming Simulation Techniques · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Feng Chia University, Taichung, Taiwan, ROC

University Louis Pasteur, IPST, IMFS-UMR7507, 15-17 Rue du Marechal Lefebvre, 67100 Strasbourg, France

Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139

References (33)

Show source-provided references
1. Taylor, G. I. , 1938, “Plastic strain in metals,” J. Inst. Met., 62, p. 307307.
2. Hutchinson, J. W. , 1976, “Bounds and self-consistent estimates for creep of polycrystalline materials,” Proc. R. Soc. London, Ser. A, 348, p. 101101.10.1098/rspa.1976.0027 ↗
3. Kocks, U. F. , 1970, “The relation between polycrystalline deformation and single-crystal deformation,” Metall. Trans., 1, p. 11211121.10.1007/BF02900224 ↗
4. Asaro, R. J., and Needleman, A., 1985, “Texture development and strain hardening in rate dependent polycrystals,” Acta Metall., 33, p. 923923.10.1016/0001-6160(85)90188-9 ↗
5. Kalidindi, S. R., Bronkhorst, C. A., and Anand, L., 1992, “Crystallographic texture evolution in bulk deformation processing of FCC metals,” J. Mech. Phys. Solids, 40, p. 537537.10.1016/0022-5096(92)80003-9 ↗
6. Sachs, G. , 1928, “Plasticity problems in metals,” Z. VD1, 72, p. 734734.
7. Leffers, T., and van Houtte, P., 1989, “Calculation and experimental orientation distributions of two lamellae in rolled brass,” Acta Metall., 37, p. 11911191.10.1016/0001-6160(89)90114-4 ↗
8. Leffers, T. , 1968, “Computer simulation of the plastic deformation in faced centered cubic polycrystals and the rolling texture derived” Riso Report No. 184 (ICOTOM 1), 1–3310.1002/pssb.19680250133 ↗
9. Leffers, T. , 1993, “Lattice rotations during plastic deformation with grain subdivision,” Mater. Sci. Forum, 157-162, pp. 1815–1820.10.4028/www.scientific.net/MSF.157-162.1815 ↗
10. Leffers, T., 1998, “Aspects of Grain Subdivision,” Plasticity 98, A. Khan, ed., pp. 165–168.
11. Leffers, T. , 2001, “A model for rolling deformation with grain subdivision. Part I: the initial stage,” Int. J. Plast. 17, pp. 469–489.10.1016/S0749-6419(00)00059-0 ↗
12. van Houte P., Delannay L., and Samajdar I., 1998, “Prediction of cold rolling textures and strain heterogeneity of steel sheets by means of the lamel model,” Plasticity98, A. Khan, ed., pp. 149–152.
13. van Houte, P., Delannay, L., and Samajdar, I., 1999, “Prediction of cold rolling textures and strain heterogeneity of steel sheets by means of the lamel model,” Textures Microstruct., 31, p. 109109.10.1155/TSM.31.109 ↗
14. Kocks, U. F., and Canova, G. R., 1981, “How many slip systems and which?,” Deformation of Polycrystals, Riso National Laboratory, Hansen et al., eds., pp. 35–44.
15. Molinari, A., Canova, G. R., and Ahzi, S., 1987, “A self-consistent approach of the large deformation polycrystal Viscoplasticity,” Acta Metall., 35, p. 29832983.10.1016/0001-6160(87)90297-5 ↗
16. Parks, D. M., and Ahzi, S., 1990, “Polycrystalline plastic deformation and texture evolution for crystal lacking five independent slip systems,” J. Mech. Phys. Solids, 38, p. 701701.10.1016/0022-5096(90)90029-4 ↗
17. Ahzi, S., Parks, D. M., and Argon, A. S., 1990, “Modeling of plastic deformation and evolution of anisotropy in semi-crystalline polymers,” Computer Modeling and Simulation of Manufacturing Processes, B. Singh et al., eds, ASME, MD-20, p. 287.10.21236/ADA237288 ↗
18. Schoenfeld, S. E., Ahzi, S., and Asaro, R. J., 1995, J. Mech. Phys. Solids, 43, p. 415415.
19. Lee, B. J., Ahzi, S., and Asaro, R. J., 1995, Mech. Mater., 20, p. 11.10.1016/0167-6636(94)00045-I ↗
20. Dahoun, A., Canova, G. R., Molinari, A., Phillipe, M. J., and G’Sell, C., 1991, Textures Microstruct., 14-18, p. 347347.10.1155/TSM.14-18.347 ↗
21. G’Sell, C., Dahoun, A., Royer, F. X., and Phillipe, M. J., 1999, Modelling Simul. Sci. Eng., 7, pp. 817–828.10.1088/0965-0393/7/5/313 ↗
22. Ahzi, S., Asaro, R. J., and Parks, D. M., 1993, “Application of crystal plasticity to mechanically processed BSCCO superconductors,” Mech. Mater., 15, p. 201201.10.1016/0167-6636(93)90018-M ↗
23. Lee, B. J., Parks, D. M., and Ahzi, S., 1993, “Micromechanical modeling of large plastic deformation and texture evolution in semi-crystalline polymers,” J. Mech. Phys. Solids, 41, p. 16511651.10.1016/0022-5096(93)90018-B ↗
24. Lee, B. J., Ahzi, S., Kad, B., and Asaro, R. J., 1993, Scr. Metall., 29, pp. 823–828.10.1016/0956-716X(93)90234-J ↗
25. Hines, J., Vecchio, K. S., and Ahzi, S., 1998, “Modeling of microstructure evolution in adiabatic shear bands,” Metall. Mater. Trans. A, 29, p. 191191.10.1007/s11661-998-0172-4 ↗
26. Lee, B. J., Vecchio, K. S., Ahzi, S., and Schoenfeld, S., 1997, “Modeling the mechanical behavior of tantalum,” Metall. Mater. Trans. A, 28, p. 113113.10.1007/s11661-997-0087-5 ↗
27. Molinari, A., and Toth, L., 1994, Acta Metall. Mater., 42, p. 24532453.10.1016/0956-7151(94)90324-7 ↗
28. Lebensohn, R. A., and Tome´, C. N., 1993, Acta Metall. Mater., 41, p. 26112611.10.1016/0956-7151(93)90130-K ↗
29. Bronkhorst, C. A., Kalidindi, S. R., and Anand, L., 1992, “Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals,” Philos. Trans. R. Soc. London, Ser. A, 341, p. 443443.10.1098/rsta.1992.0111 ↗
30. Leffers, T. , 2001, “A model for rolling deformation with grain subdivision. Part II: the subsequent stage,” Int. J. Plast. 17, pp. 491–511.10.1016/S0749-6419(00)00060-7 ↗
31. Garmestani, H., Lin, S., Adams, B. L., and Ahzi, S., 2001, J. Mech. Phys. Solids, 49, pp. 589–607.10.1016/S0022-5096(00)00040-5 ↗
32. Asaro, R. J., and Rice, J. R., 1977, “Strain localization in ductile single crystals,” J. Mech. Phys. Solids, 25, p. 309309.10.2172/7308082 ↗
33. Lee, B. J., Ahzi, S., and Parks D. M., 1998, “Intermediate modeling of polycrystal deformation,” Plasticity 98, A. Khan, ed., pp. 377–380.