Elastic and Plastic Response of Perforated Metal Sheets With Different Porosity Architectures
Source abstract
Abstract
The effects of porosity architecture and volume fraction on the homogenized elastic moduli and elastic-plastic response of perforated thin metal sheets are investigated under three fundamental loading modes using an efficient homogenization theory. Steel and aluminum sheets weakened by circular, hexagonal, square, and slotted holes arranged in square and hexagonal arrays subjected to inplane normal and shear loading are considered with porosity volume fractions in the range 0.1–0.6. Substantial variations are observed in the homogenized elastic moduli with porosity shape and array type. The differences are rooted in the stress transfer mechanism around traction-free porosities whose shape and distribution play major roles in altering the local stress fields and thus the homogenized response in the elastic-plastic domain. This response is characterized by four parameters that define different stages of micro- and macrolevel yielding. The variations in these parameters due to porosity architecture and loading direction provide useful data for design purposes under monotonic and cyclic loading.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Material Mechanics · Mechanical Behavior of Composites · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, University of Virginia, Charlottesville, VA 22904-4742
Gilsanz Murray Steficek LLP, New York, NY 10001
References (34)
Show source-provided references
1. Stress Distribution in an Infinite Elastic Sheet With a Doubly-Periodic Set of Equal Holes
2. A Method for the Solution of Doubly-Periodic Problems in the Theory of Elasticity
3. Mejiers, P. , 1967, “Doubly-Periodic Stress Distributions in Perforated Plates,” Ph.D. thesis, Technological University, Delft.
4. Effective Elastic Constants for Thick Perforated Plates With Square and Triangular Penetration Patterns
5. Yield Surfaces for Perforated Materials10.1115/1.3422938 ↗
6. Plastic Strain Concentrations in Perforated Structures Subjected to Alternating Loads10.1115/1.3264198 ↗
7. Plastic Behaviour of Perforated Sheets With Slot-Type Holes Under Biaxial Stress State10.1016/S0020-7403(99)00007-7 ↗
8. Micro-Macromechanical Analysis of Heterogeneous Materials: Macroscopically Homogeneous vs Periodic Microstructures10.1016/j.compscitech.2006.02.031 ↗
9. Sanchez-Palencia
10. Suquet · 193
11. Adaptivity and Convergence in the Voronoi Cell Finite Element Model for Analyzing Heterogeneous Materials10.1016/S0045-7825(99)00349-7 ↗
12. On the Capabilities of Mean-Field Approaches for the Description of Plasticity in Metal Matrix Composites10.1016/j.ijplas.2004.07.001 ↗
13. A Second Look at the Higher-Order Theory for Periodic Multiphase Materials10.1115/1.1831294 ↗
14. Finite-Volume Direct Averaging Micromechanics of Heterogeneous Materials With Elastic-Plastic Phases10.1016/j.ijplas.2005.04.012 ↗
15. On the Micromechanics-Based Simulation of Metal Matrix Composite Response10.1115/1.2744419 ↗
16. Theory of Elasticity of a Multilayered Medium10.1007/BF00046464 ↗
17. Local/Global Stiffness Matrix Formulation for Composite Materials and Structures10.1016/0961-9526(91)90028-Q ↗
18. Higher-Order Theory for Periodic Multiphase Materials With Inelastic Phases10.1016/S0749-6419(02)00007-4 ↗
19. Parametric Finite-Volume Micromechanics of Uniaxial, Continuously-Reinforced Periodic Materials With Elastic Phases10.1115/1.2931157 ↗
20. Parametric Formulation of the Finite-Volume Theory for Functionally Graded Materials. Part I: Analysis10.1115/1.2722312 ↗
21. Parametric Formulation of the Finite-Volume Theory for Functionally Graded Materials. Part II: Numerical Results10.1115/1.2722313 ↗
22. Thermo-Elastic Moduli of Periodic Multilayers With Wavy Architectures10.1016/j.compositesb.2008.07.001 ↗
23. Khatam, H., and Pindera, M. -J., 2008, “Parametric Finite-Volume Micromechanics of Periodic Materials With Elastoplastic Phases,” Int. J. Plast.0749-6419, doi:10.1016/j.ijplas.2008.09.00310.1016/j.ijplas.2008.09.003 ↗
24. Computational Aspects of the Parametric Finite-Volume Theory for Functionally Graded Materials10.1016/j.commatsci.2008.04.006 ↗
25. Plastic Deformation of Continuous Fiber-Reinforced Metal-Matrix Composites: Effects of Fiber Shape and Distribution10.1016/0956-716X(90)90264-H ↗
26. Deformation of Metal-Matrix Composites With Continuous Fibers: Geometric Effects of Fiber Distribution and Shape10.1016/0956-7151(91)90274-5 ↗
27. Influence of Fiber Architecture on the Inelastic Response of Metal Matrix Composites10.1016/S0749-6419(96)00018-6 ↗
28. Mendelson
29. Elastic Properties of Reinforced Solids: Some Theoretical Principles10.1016/0022-5096(63)90036-X ↗
30. An Analytical Model for the Inelastic Axial Shear Response of Unidirectional Metal Matrix Composites10.1016/S0749-6419(97)00011-9 ↗
31. Stochastic Calibration of Local Constitutive Models Through Measurements at the Macroscale in Heterogeneous Media10.1016/j.cma.2005.07.026 ↗
32. Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in Extension10.1115/1.4010553 ↗
33. On the Computation of Stress Fields on Polygonal Domains With V-Notches10.1002/nme.291 ↗
34. Modeling of Singular Stress Fields Using Finite Element Method10.1016/S0020-7683(02)00371-2 ↗