Effect of Strain Path and the Magnitude of Prestrain on the Formability of a Low Carbon Steel: On the Textural and Microtextural Developments
Source abstract
Abstract
A low carbon steel (0.07-wt % carbon) sheet metal was deformed in five different strain paths, from equi-biaxial tension to plane strain to near uniaxial tension, by in-plane stretching. Textural developments were characterized by X-ray Orientation Distribution Function (ODFs) and the same were simulated using different Taylor type deformation texture models. A strong difference in bulk texture developments was observed at respective strain paths. The textural differences largely explain the changes observed in normal anisotropy values obtained by mechanical testing. The new deformation texture simulation model, Lamel, was quite successful in predicting quantitatively such textural differences. Microscopically, the significant features of the substructures were “strain localizations”—first generation dense dislocation walls (DDWs) and micro bands (MBs). Both in-grain rotations and estimated stored energies did depend on the relative appearance of such strain localizations. These, on the other hand, were distinctly related to the textural softening or dM/dε, where M and ε are the Taylor factor and true strain, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Dept. of Met. Eng. and Mater. Sci., IIT Bombay, Powai, Mumbai 400 076, India
Dept. of Mech. Eng., IIT Bombay, Powai, Mumbai 400 076, India
References (37)
Show source-provided references
1. Vankudre, H.V., 2002, “Studies on Strain Dependence of Mechanical Properties of Steel Sheet Subjected to In-plane Stretching along different Strain Path.” Ph.D. thesis, Indian Institute of Technology Bombay, Mumbai, India.
2. Davies, G. J., Goodwill, D. J., Kallend, J. S., and Ruberg, T., 1973, “The Correlation of Structure and Texture with Formability,” J. Inst. Met., 101, pp. 270–273.
3. Bacroix, B., and Zaiqian, Hu, 1995, “Texture Evolution Induced by Strain Path Changes In Low Carbon Steel Sheets,” Metall. Mater. Trans. A, 26A, pp. 601–613.10.1007/BF02663909 ↗
4. Kallend, J. S., and Da Costa Viana, C. S., 1986, “The Influence of Texture on the Formability of Sheets of Cubic Metals,” Proceedings on Formability and Metallurgical Structure sponsored by TMS-AIME, A. K. Sachdev and J. D. Embury, eds., The Metallurgical Society, Warrendale, PA, pp. 137–146.
5. Toth, L. S., Hirsch, J., and Van Houtte, P., 1996, “On the Role of Texture Developments in the Forming Limits of Sheet Metals,” Int. J. Mech. Sci., 38(10), pp. 1117–1126.10.1016/0020-7403(95)00110-7 ↗
6. Nakamachi, E., Xie, C. L., and Harimoto, M., 2001, “Drawability Assessment of BCC Steel Sheet by Using Elastic/Crystalline Viscoplastic Finite Element Analyses,” Int. J. Mech. Sci., 43, pp. 631–652.10.1016/S0020-7403(00)00048-5 ↗
7. Lee, D. N., and Kim, I., 1988, “Calculation of Yield Stresses and Plastic Strain Ratios,” J. Mater. Sci., 23, pp. 4013–4021.10.1007/BF01106829 ↗
8. Welch, P. I., and Bunge, H. J., 1986, “Influence of Grain size on Plastic Anisotropy in Low-carbon Steels,” Mat. Sci. Techol., 2, pp. 354–362.10.1179/026708386790328803 ↗
9. Lee, D. N., and Oh, K. H., 1985, “Calculation of Plastic Strain Ratio from the Texture of Cubic Metal Sheet,” J. Mater. Sci., 20, pp. 3111–3118.10.1007/BF00545175 ↗
10. Friedman, P. A., Liao, K. C., Pan, J., and Barlat, F., 1999, “Texture Development and Hardening Characteristics of Steel Sheets under Plane-Strain Compression,” J. Mater. Eng. Perform., 8(2), pp. 225–235.10.1361/105994999770347089 ↗
11. Grzesik, D., and Vlad, C. M., 1978, “The Influence of Various Strain and Stress-ratios Upon the Preferred Orientations during the Pressing of Low Carbon Deep Drawing Sheet Steels,” Proceedings of Fifth International Conference on Textures of Materials, G. Gottestein and K. Lucke, eds., Springer-Verlag, Berlin-Heidelberg, 2, pp. 295–305.
12. Welch, P. I. , 1982, “On Texture Changes at Small Strains,” Scr. Metall., 16(3), pp. 279–280.10.1016/0036-9748(82)90351-9 ↗
13. Mishrams, R. A., Crosby, K. E., Mohamadian, H. P., and Burris, C. L., Sr., 1993, “The Influence of Biaxial Stretching on the Texture of Ultra Low Carbon (ULC) Steel sheets,” Scr. Metall. Mater., 29(4), pp. 433–438.10.1016/0956-716X(93)90143-G ↗
14. Peeters, B., Seefeldt, M., Teodosiu, C., Kalidindi, S. R., Van Houtte, P., and Aernoudt, E., 2001, “Work-Hardening/Softening Behaviour of BCC Polycrystals During Changing Strain Paths: I. An Integrated Model Based on Substructure and Texture Evolution, and its Prediction of the Stress-Strain Behaviour of an IF Steel During Two-stage Strain Paths,” Acta Mater., 49, pp. 1607–1619.10.1016/S1359-6454(01)00066-0 ↗
15. Argon, A. S., and Haasen, P., 1993, “A New Mechanism of Work Hardening in the Late Stages of Large Strain Plastic Flow in FCC and Diamond Cubic Crystals,” Acta Metall. Mater., 41(11), pp. 3289–3306.10.1016/0956-7151(93)90058-Z ↗
16. Fleck, N. A., Muller, G. M., Ashby, M. F., and Hutchinson, J. W., 1994, “Strain Gradient Plasticity: Theory and Experiment,” Acta Metall. Mater., 42(2), pp. 475–487.10.1016/0956-7151(94)90502-9 ↗
17. Peeters, B., Bacroix, B., Teodosiu, C., Van Houtte, P., and Aernoudt, E., 2001, “Work-Hardening/Softening Behaviour of BCC Polycrystals During Changing Strain Paths: II; TEM Observations of Dislocation Sheets in an IF Steel During Two-Stage Strain Paths and their Representation in terms of Dislocation Densities,” Acta Mater., 49, pp. 1621–1632.10.1016/S1359-6454(01)00067-2 ↗
18. Van Houtte, P., Delannay, L., and Samajdar, I., 1999, “Quantitative Prediction of Cold Rolling Textures in Low-Carbon Steel by Means of the Lamel Model,” Textures Microstruct., 31, pp. 109–149.10.1155/TSM.31.109 ↗
19. Samajdar, I., Verlinden, I., and Van Houtte, P., 1998, “Developments in Macro & Micro Texture During Plane Strain Channel Die Compression of IF Steel,” ISIJ Int., 38(7), pp. 759–765.10.2355/isijinternational.38.759 ↗
20. Samajdar, I., Verlinden, B., Kestens, L., and Van Houtte, P., 1999, “Physical Parameters Related to the Developments of Recrystallisation Textures in an Ultra Low Carbon Steel,” Acta Mater., 47(1), pp. 55–65.10.1016/S1359-6454(98)00337-1 ↗
21. Lin, D. W., Daniel, D., and Jonas, J. J., 1991, “Simulation of the Effect of Texture on Limit Strain in Biaxially Stretched Steel Sheet,” Metall. Mater. Trans. A, 22A, pp. 2069–2076.10.1007/BF02669874 ↗
22. Nandedkar, V. M., Samajdar, I., and Narasimhan, K., 2001, “Development of Grain Interior Strain Localizations During Plane Strain Deformation of a Deep Drawing Quality Sheet Steel,” ISIJ Int., 41(12), pp. 1517–1523.10.2355/isijinternational.41.1517 ↗
23. Samajdar, I., Verlinden, B., Van Houtte, P., and Vanderschueren, D., 1997, “γ-fiber Recrystallization Texture in IF-steel: An Investigation on the Recrystallization Mechanisms,” Mater. Sci. Eng., A, A238, pp. 343–350.10.1016/S0921-5093(97)00455-3 ↗
24. Akbari, G. H., Sellars, C. M., and Whiteman, J. A., 1997, “Microstructural Developments During Warm Rolling of an IF Steel,” Acta Mater., 45(12), pp. 5047–5058.10.1016/S1359-6454(97)00170-5 ↗
25. Ushioda, K., and Hutchinson, W. B., 1989, “Role of Shear Bands in Annealing Texture Formation in 3% Si-Fe (111) [112]¯ Single Crystals,” ISIJ Int., 29(10), pp. 862–867.10.2355/isijinternational.29.862 ↗
26. Kallend, J. S., and Huang, Y. C., 1984, “Orientation Dependence of Stored Energy of Cold Work in 50% Cold Rolled Copper,” Met. Sci., 18(7), pp. 381–385.10.1179/030634584790419890 ↗
27. Rajmohan, N., Hayakawa, Y., and Szpunar, J. A., 1997, “Neutron Diffraction Method for Stored Energy Measurement in Interstitial Free Steel,” Acta Mater., 45(6), pp. 2485–2494.10.1016/S1359-6454(96)00371-0 ↗
28. Cicale`, S., Samajdar, I., Verlinden, B., Abbruzzese, G., and Van Houtte, P., 2002, “On the Development of Cold Rolled Texture and Microstructure-Subject Hot Band Fe-3% Si Steel,” ISIJ Int., 42(7), pp. 770–778.10.2355/isijinternational.42.770 ↗
29. Nandedkar, V. M., and Narasimhan, K., 1999, “Measurement of Strain History During the Stretching of Forming Grade Steel Sheets,” J. Mater. Process. Technol., 89–90, pp. 24–29.10.1016/S0924-0136(99)00074-6 ↗
30. Dillamore, I. L., Roberts, J. G., and Bush, A. C., 1979, “Occurrence of Shear Bands in Heavily Rolled Cubic Metals,” Met. Sci., 13(2), pp. 73–77.10.1179/msc.1979.13.2.73 ↗
31. Wagner, P., Engler, O., and Lucke, K., 1995, “Formation of Cu-Type Shear Bands and their Influence on Deformation and Texture of Rolled FCC {112}〈111〉 Single Crystals,” Acta Metall. Mater., 43(10), pp. 3799–3812.10.1016/0956-7151(95)90164-7 ↗
32. Gil Sevillano, J., Van Houtte, P., and Aernoudt, E., 1980, “Large Strain Work Hardening and Textures,” Prog. Mater. Sci., 25(2-4), pp. 69–412.10.1016/0079-6425(80)90001-8 ↗
33. Bunge, H. J., 1982, Texture Analysis in Materials Science, Butterworth, London.
34. Van Houtte, P., 1995, MTM-FHM Software Manual, Katholieke Universiteit Leuven, Belgium.
35. Van Houtte, P. , 1987, “Calculation of the Yield Locus of Textured Polycrystals Using Taylor and the Relaxed Taylor Theory,” Textures Microstruct., 7, pp. 29–72.10.1155/TSM.7.29 ↗
36. Toth, L. S., and Van Houtte, P., 1992, “Discretization Techniques for Orientation Distribution Functions,” Textures Microstruct., 19, pp. 229–244.10.1155/TSM.19.229 ↗
37. Aernoudt, E., Van Houtte, P., and Leffers, T., 1993, “Deformation and Textures of Metals at Large Strains,” in Plastic Deformation and Fracture of Materials (Volume 6 of Materials Science & Technology: A Comprehensive Treatment, R. W. Cahn, Haasen, P., and E. J. Kramer) H., Mughrabi, ed., Weinheim, Federal Republic of Germany, VCH, pp. 89–136.