Stress-Based Springback Reduction of a Channel Shaped Auto-Body Part With High-Strength Steel Using Response Surface Methodology
Source abstract
Abstract
In this paper, an optimum design is carried out with finite element analysis to determine process parameters which reduce the amount of springback and improve shape accuracy of a deep drawn product with the channel shape. Without springback simulation usually performed with an implicit solving scheme, the study uses the amount of stress deviation through the sheet thickness direction in the deep drawn product as an indicator of springback. The simulation incorporates the explicit elasto-plastic finite element method for calculation of the final shape and the stress deviation of the final product. The optimization method adopts the response surface methodology in order to seek the optimum condition of process parameters such as the blank holding force and the draw-bead force. The present optimization scheme is applied to the design of the variable blank holding force in the U-draw bending process and the application is further extended to the design of draw-bead force in a front side member formed with advanced high-strength steel (AHSS) sheets made of DP600. Results demonstrate that the optimum design of process parameters decreases the stress deviation throughout the thickness of the sheet and reduces the amount of springback of the channel shaped part. The present analysis provides a guideline in the tool design stage for controlling the evolution of springback based on the finite element simulation of complicated parts.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical, Aerospace, and System Engineering, Korea Advanced Institute of Science and Technology, Science Town, Daejeon 305-701, Korea
School of Automotive, Industrial and Mechanical Engineering, Daegu University, Jillyang, Gyeongsan, Gyeongbuk 712-714, Korea
References (28)
Show source-provided references
1. Elastic and Inelastic Recovery after Plastic Deformation of DQSK Steel Sheet10.1115/1.1491574 ↗
2. Modeling the Baushinger Effect for Sheet Metals, Part II: applications10.1016/S0749-6419(01)00047-X ↗
3. A New Model for Springback Prediction in which the Bauschinger Effect is Considered10.1016/S0020-7403(01)00012-1 ↗
4. Stress and Strain Histories of Multiple Bending-Unbending Springback Process10.1115/1.1395574 ↗
5. Tooling and Binder Design for Sheet Metal Forming Compensating Springback Error10.1016/0890-6955(95)00023-2 ↗
6. Effective Models for Prediction of Springback In Flanging10.1115/1.1395019 ↗
7. Practical Methods for the Design of Sheet Formed Components10.1115/1.1789955 ↗
8. Die Design Method for Sheet Springback10.1016/j.ijmecsci.2004.06.006 ↗
9. Finite Element Analysis and Optimization on Springback Reduction10.1016/S0890-6955(98)00031-5 ↗
10. Variable Blankholder Force in U-shaped Part Forming for Eliminating Springback Error10.1016/S0924-0136(01)01110-4 ↗
11. Design Sensitivity Analysis of Sheet Metal Forming Processes with a Direct Differentiation Method
12. Optimization of Blank Dimensions to Reduce Springback in the Flexforming Process10.1016/S0924-0136(03)00841-0 ↗
13. Experimental Implementation of Neural Network Springback Control for Sheet Metal Forming10.1115/1.1555652 ↗
14. Consistent and Minimal Springback Using a Stepped Binder Force Trajectory and Neural Network Control10.1115/1.482774 ↗
15. Accommodation of Springback Error in Channel Forming using Active Binder Force Control: Numerical Simulations and Experiments10.1115/1.2806830 ↗
16. An Investigation of the Factors Influencing Springback by Empirical and Simulative Techniques
17. An Assessment of Numerical Parameters Influencing Springback in Explicit Finite Element Analysis of Sheet Metal Forming Process
18. Experimental and Numerical Prediction of Springback and Side Wall Curl in U-Bending of Anisotropic Sheet Metals10.1016/S0924-0136(00)00587-2 ↗
19. Sensitive Factors in Springback Simulation for Sheet Metal Forming10.1016/j.jmatprotec.2004.04.044 ↗
20. Advances in Springback
21. Optimum Process Design in Sheet-Metal Forming with Finite Element Analysis10.1115/1.1395579 ↗
22. Myers
23. LS-DYNA3D, 2003, Keyword User’s Manual, Version 9.7, Livermore Software Technology Cooperation, Livermore, CA.
24. HyperStudy, 2004, User’s Manual, Version 7.0, Altair Engineering, Troy, MI.
25. Makinouchi
26. Draw-Bead Simulation by an Elasto-plastic Finite Element Method with Directional Reduced Integration10.1016/S0924-0136(96)02704-5 ↗
27. Optimization Design of Drawbead in Drawing Tools of Autobody Cover Panel10.1115/1.1448523 ↗
28. Effect of Draw-bead and Blank Holding Force on Sheet Metal Forming Process