journal article·2005-07-01

The New Grain Formation During Warm and Hot Deformation of Copper

Agnieszka M. Wusatowska-Sarnek

Publisher page

Abstract

Initial stage of dynamic recrystallization (DRX) under warm and hot deformation was investigated in polycrystalline copper. At the onset of DRX at intermediate deformation temperatures (i.e., high values of Zener–Hollomon parameter Z) large orientation gradients are developed near grain boundaries, and conversely smaller gradients at high temperatures (i.e., low Z values). The frequency of thermally activated grain boundary motion coupled with various levels of local orientation gradients lead to the operation of different mechanisms of DRX nucleation. At warm deformation equiaxed grains with moderate- to high-angle boundaries are evolved at near the pre-existed boundary as a result of increasing density of geometrically necessary boundaries and progressive rotation of subgrains with little accompanying boundary migration, while at hot deformation grain boundary bulging accompanied with twinning takes place.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

(860) 565-0374 (860) 755-0012

Pratt and Whitney Co., 400 Main Street, M/S 114-40, East Hartford, CT 06108

References (18)

Show source-provided references
1. Haessner · 111
2. Humphreys · 327
3. Dynamic Recrystallization Under Warm Deformation of Polycrystalline Copper10.2355/isijinternational.38.595 ↗
4. Strain-Induced Grain Evolution in Polycrystalline Copper During Warm Deformation
5. On Deformation-Induced Continuous Recrystallization in a Superplastic Al-Li-Cu-Mg-Zr Alloy
6. An Experimental Study of the Recrystallization Mechanism During Hot Deformation of Aluminum10.1016/S0921-5093(00)00733-4 ↗
7. Overview no. 35: Dynamic Recrystallization: Mechanical and Microstructural Considerations10.1016/0001-6160(84)90049-X ↗
8. Frost · 37
9. Edington · 52
10. Nucleation and Microtexture Development Under Dynamic Recrystallization of Copper10.1016/S0921-5093(01)01336-3 ↗
11. The Dependence of Grain Size on Stress During Dynamic Recrystallization10.1016/0956-7151(91)90295-C ↗
12. Grain Refinement in Copper Under Large Strain Deformation10.1080/01418610110042876 ↗
13. High Angle Boundaries Formed by Grain Subdivision Mechanisms10.1016/S1359-6454(97)00027-X ↗
14. The Role of Twinning During Dynamic Recrystallization in Alloy 800H10.1016/S1359-6462(02)00072-6 ↗
15. Bocher · 355
16. Formation Mechanism of Texture During Dynamic Recrystallization in γ-TiAl, Nickel and Copper Examined by Microstructure Observation and Grain Boundary Analysis Based on Local Orientation Measurements10.1016/S1359-6454(03)00218-0 ↗
17. Formation of Annealing Twins in f.c.c. Crystals10.1016/S1359-6454(96)00336-9 ↗
18. Microstructural Development Under Dynamic Recrystallization of Polycrystalline Materials