journal article·2009-01-01

Obtaining a Relationship Between Process Parameters and Fracture Characteristics for Hybrid CO2 Laser∕Waterjet Machining of Ceramics

Dinesh Kalyanasundaram, Pranav Shrotriya, Pal Molian

Publisher page

Abstract

Abstract A combined experimental and analytical approach is undertaken to identify the relationship between process parameters and fracture behavior in the cutting of a 1mm thick alumina samples by a hybrid CO2 laser∕waterjet (LWJ) manufacturing process. In LWJ machining, a 200W power laser was used for local heating followed by waterjet quenching of the sample surface leading to thermal shock fracture in the heated zone. Experimental results indicate three characteristic fracture responses: scribing, controlled separation, and uncontrolled fracture. A Green’s function based approach is used to develop an analytical solution for temperatures and stress fields generated in the workpiece during laser heating and subsequent waterjet quenching along the machining path. Temperature distribution was experimentally measured using thermocouples and compared with analytical predictions in order to validate the model assumptions. Computed thermal stress fields are utilized to determine the stress intensity factor and energy release rate for different configurations of cracks that caused scribing or separation of the workpiece. Calculated crack driving forces are compared with fracture toughness and critical energy release rates to predict the equilibrium crack length for scribed samples and the process parameters associated with transition from scribing to separation. Both of these predictions are in good agreement with experimental observations. An empirical parameter is developed to identify the transition from controlled separation to uncontrolled cracking because the equilibrium crack length based analysis is unable to predict this transition. Finally, the analytical model and empirical parameter are utilized to create a map that relates the process parameters to the fracture behavior of alumina samples.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Laser Material Processing Techniques · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory for Lasers, MEMS and Nanotechnology, Department of Mechanical Engineering, Iowa State University, Ames, IA 50014

References (27)

Show source-provided references
1. Cutting With Abrasive Waterjets
2. Kerf Formation Analysis in the Abrasive Waterjet Cutting of Industrial Ceramics10.1016/S0924-0136(02)00437-5 ↗
3. Comparison of Strength of Alumina Substrates for Different Separation Techniques
4. Experimental Investigations of Machining Characteristics and Removal Mechanisms of Advanced Ceramics in High Speed Deep Grinding10.1016/S0890-6955(03)00050-6 ↗
5. Design and Validation of a Hybrid Laser∕Water-Jet Machining System for Brittle Materials10.2351/1.2900554 ↗
6. A Study of Laser Cutting Engineering Ceramics10.1016/S0030-3992(99)00100-0 ↗
7. Surface Finish and Flexural Strength of CO2 Laser-Cut Alumina by Evaporative and Thermal Stress Fracture Modes
8. CO2 Laser∕Waterjet Machining of Polycrystalline Cubic Boron Nitride
9. Controlled Separation of Brittle Materials Using a Laser
10. Fracture Mechanism of Laser Cutting With Controlled Fracture10.1115/1.1559163 ↗
11. Formation of the Breaking Surface of Alumina in Laser Cutting With a Controlled Fracture Technique10.1243/095440503321628161 ↗
12. Fracture Control of Unsupported Ceramics During Laser Machining Using a Simultaneous Prescore10.2351/1.1848527 ↗
13. Plane-Stress Model for Fracture of Ceramics During Laser Cutting10.1016/0890-6955(94)00127-6 ↗
14. Water-Assisted Laser Thermal Shock Machining of Alumina10.1016/j.ijmachtools.2007.04.003 ↗
15. A Thermal Stress Failure Model for Laser Cutting and Forming Operations
16. The Thermal Shock Resistance of Solids10.1016/S1359-6454(98)00127-X ↗
17. Crack Channelling and Spalling in a Plate Due to Thermal Shock Loading10.1016/S0022-5096(99)00064-2 ↗
18. Global Description of Crack Propagation in Ceramics10.1016/j.jeurceramsoc.2005.11.004 ↗
19. Formation of Surface Microcrack for Separation of Nonmetallic Wafers Into Chips10.1115/1.1289635 ↗
20. Boley
21. Tada
22. Determination of Effective Optical-Constants of Infrared CO2 Wave-Guide Laser Materials10.1364/AO.31.004175 ↗
23. CO2 Laser Processing of Alumina (Al2O3) Printed Circuit Board Substrates10.1109/TEPM.2005.852232 ↗
24. Incropera
25. Ashby
26. Crack Path Instabilities in a Quenched Glass Plate10.1016/S0022-5096(00)00022-3 ↗
27. Steen