journal article·1999-04-01

Constitutive Modeling of Inelastic Solids for Plastic Flow Processes Under Cyclic Dynamic Loadings

W. Dornowski, P. Perzyna

Publisher page

Abstract

The main objective of the paper is the description of the behavior and fatigue damage of inelastic solids in plastic flow processes under dynamic cyclic loadings. Experimental motivations and physical foundations are given. Recent experimental observations for cycle fatigue damage mechanics at high temperature of metals suggest that the intrinsic microdamage process does very much depend on the strain rate effects as well as on the wave shape effects. The microdamage process has been treated as a sequence of nucleation, growth and coalescence of microcracks. The microdamage kinetics interacts with thermal and load changes to make failure of solids a highly rate, temperature and history dependent, nonlinear process. A general constitutive model of elasto-viscoplastic damaged polycrystalline solids is developed within the thermodynamic framework of the rate type covariance structure with finite set of the internal state variables. A set of the internal state variables is assumed and interpreted such that the theory developed takes account of the effects as follows: (i) plastic non-normality; (ii) plastic strain induced anisotropy (kinematic hardening); (iii) softening generated by microdamage mechanisms; (iv) thermomechanical coupling (thermal plastic softening and thermal expansion); (v) rate sensitivity. To describe suitably the time and temperature dependent effects observed experimentally and the accumulation of the plastic deformation and damage during dynamic cyclic loading process the kinetics of microdamage and the kinematic hardening law have been modified. The relaxation time is used as a regularization parameter. By assuming that the relaxation time tends to zero, the rate independent elastic-plastic response can be obtained. The viscoplastic regularization procedure assures the stable integration algorithm by using the finite difference method. Particular attention is focused on the well-posedness of the evolution problem (the initial-boundary value problem) as well as on its numerical solutions. The Lax-Richtmyer equivalence theorem is formulated and conditions under which this theory is valid are examined. Utilizing the finite difference method for regularized elasto-viscoplastic model, the numerical investigation of the three-dimensional dynamic adiabatic deformation in a particular body under cyclic loading condition is presented. Particular examples have been considered, namely, a dynamic, adiabatic and isothermal, cyclic loading processes for a thin steel plate with small rectangular hole located in the centre. Small two regions which undergo significant deformations and temperature rise have been determined. Their evolution until occurrence of final fracture has been simulated. The accumulation of damage and equivalent plastic deformation on each considered cycle has been obtained. It has been found that this accumulation distinctly depends on the wave shape of the assumed loading cycle.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Military University of Technology, Kaliskiego 2, 01-489 Warsaw, Poland

Institute of Fundamental Technological Research, Polish Academy of Sciences, S´wie¸tokrzyska 21, 00-049 Warsaw, Poland

References (49)

Show source-provided references
1. Abraham, R., Marsden, J. E. and Ratiu, T., 1988, Manifolds, Tensor Analysis and Applications. Springer, Berlin.10.1007/978-1-4612-1029-0 ↗
2. Agah-Tehrani A. , LeeE. H., MalettR. L., and OnatE. T., 1987, “The theory of elastic-plastic deformation at finite strain with induced anisotropy modelled isotropic-kinematic hardening,” J. Mech. Phys. Solids, 35, pp. 43–60.10.1016/0022-5096(87)90015-9 ↗
3. Armstrong, P. J. and Frederick, C. O., 1966, “A mathematical representation of the multiaxial Baushinger effect,” CEGB Report RD/B/N731, Central Electricity Generating Board.
4. Auricchio, F. and Taylor, R. L., 1995, “Two material models for cyclic plasticity models: Nonlinear kinematic hardening and generalized plasticity,” Int. J. Plasticity, 11, pp. 65–98.10.1016/0749-6419(94)00039-5 ↗
5. Auricchio, F., Taylor, R. L. and Lubliner, J., 1992, “Application of a return map algorithm to plasticity models,” in COMPLAS Computational Plasticity: Fundamentals and Applications, (eds. D. R. J, Owen and E. Onate), Barcelona, pp. 2229–2248.
6. Chaboche J. L. , 1986, “Time-independent constitutive theories for cyclic plasticity,” Int. J. Plasticity, 2,e pp. 149–188.10.1016/0749-6419(86)90010-0 ↗
7. Chaboche J. L. , 1989, “Constitutive equations for cyclic plasticity and cyclic viscoplasticity,” Int. J. Plasticity, 5, pp. 247–302.10.1016/0749-6419(89)90015-6 ↗
8. Coffin, L. F., 1976, Proceedings, ASME-MPC Symposium on Creep-Fatigue Interaction, MPC-3, ASME, Dec.
9. Coffin, L. F., 1977a, Proceedings, 4th International Conference on Fracture, Waterloo, Ont., Canada, June 1977, pp. 263–292.10.1016/B978-0-08-022136-6.50029-9 ↗
10. Coffin, L. F., 1977b, Time-Dependent Fatigue of Structural Alloys, ORNL 5073, Oak Ridge National Laboratory, Oak Ridge, Tenn., June 1977.
11. Coleman B. D. , and NollW., 1963, “The thermodynamics of elastic materials with heat conduction and viscosity,” Arch. Rational Mech. Anal., 13, pp. 167–178.10.1007/BF01262690 ↗
12. Curran D. R. , SeamanL., and ShockeyD. A., 1987, “Dynamic failure of solids,” Physics Reports, 147, pp. 253–388.10.1016/0370-1573(87)90049-4 ↗
13. Dafalias Y. F. and PopovE. P., 1976, “Plastic internal variable formalism of cyclic plasticity,” J. Appl. Mech., 43, pp. 645–651.10.1115/1.3423948 ↗
14. Dautray, R. and Lions, J.-L., 1993, “Mathematical Analysis and Numerical Methods for Science and Technology,” Vol. 6. Evolution Problems II, Springer, Berlin.
15. Dornowski, W., 1998, “The influence of finite deformation on the mechanism of microdamage in structural metals,” Biuletyn WAT (in print).
16. Duszek M. K. , and PerzynaP., 1991a, “On combined isotropic and kinematic hardening effects in plastic flow processes,” Int. J. Plasticity, 7, pp. 351–363.10.1016/0749-6419(91)90009-N ↗
17. Duszek M. K. and PerzynaP., 1991b, “The localization of plastic deformation in thermoplastic solids,” Int. J. Solids Structures, 27, pp. 1419–1443.10.1016/0020-7683(91)90040-M ↗
18. Duszek-Perzyna, M. K. and Perzyna, P., 1994, “Analysis of the influence of different effects on criteria for adiabatic shear band localization in inelastic solids,” Material Instabilities: Theory and Applications, ASME Congress, Chicago, 9–11 November 1994 (Eds. R. C. Batra and H. M. Zbib), AMD-Vol. 183/MD-Vol. 50, ASME, New York, pp. 59–85.
19. Gustafsson, B., Kreiss, H. O. and Oliger, J., 1995, Time Dependent Problems and Difference Methods, Wiley, New York.
20. Hughes T. J. R. , KatoT. and MarsdenJ. E., 1977, “Well-posed quasilinear second order hyperbolic system with application to nonlinear elastodynamics and general relativity,” Arch. Rat. Mech. Anal., 63, pp. 273–294.10.1007/BF00251584 ↗
21. Ionescu, I. R. and Sofonea, M., 1993, Functional and Numerical Methods in Viscoplasticity, Oxford.10.1093/oso/9780198535904.001.0001 ↗
22. Johnson J. N. , 1981, “Dynamic fracture and spallation in ductile solids,” J. Appl. Phys., 52, pp. 2812–2825.10.1063/1.329011 ↗
23. Lodygowski T. and PerzynaP., 1997, “Localized fracture of inelastic polycrystalline solids under dynamic loading processes,” Int. J. Damage Mechanics, 6, pp. 364–407.10.1177/105678959700600402 ↗
24. Marsden, J. E. and Hughes, T. J. R., 1983, Mathematical Foundations of Elasticity, Prentice Hall, Englewood Cliffs, NJ.
25. Mro´z Z. , 1967, “On the description of anisotropic workhardening,” J. Mech. Phys. Solids, 15, pp. 163–175.10.1016/0022-5096(67)90030-0 ↗
26. Nemes J. A. and EftisJ., 1993, “Constitutive modelling of the dynamic fracture of smooth tensile bars,” Int. J. Plasticity, 9, pp. 243–270.10.1016/0749-6419(93)90031-K ↗
27. Nemes J. A. , EftisJ. and RandlesP. W., 1990, “Viscoplastic constitutive modelling of high strain-rate deformation, material damage and spall fracture,” ASME J. Appl. Mech., 57, pp. 282–291.10.1115/1.2891986 ↗
28. Oldroyd J. , 1950, “On the formulation of rheological equations of state,” Proc. Roy. Soc. (London), A 200, pp. 523–541.10.1098/rspa.1950.0035 ↗
29. Perzyna P. , 1963, “The constitutive equations for rate sensitive plastic materials,” Quart. Appl. Math., 20, pp. 321–332.10.1090/qam/144536 ↗
30. Perzyna P. , 1971, “Thermodynamic theory of viscoplasticity,” Advances in Applied Mechanics, 11, pp. 313–354.10.1016/S0065-2156(08)70345-4 ↗
31. Perzyna P. , 1984, “Constitutive modelling of dissipative solids for postcritical behaviour and fracture,” ASME J. Eng. Materials and Technology, 106, pp. 410–419.10.1115/1.3225739 ↗
32. Perzyna P. , 1986a, “Internal state variable description of dynamic fracture of ductile solids,” Int. J. Solids Structures, 22, pp. 797–818.10.1016/0020-7683(86)90123-X ↗
33. Perzyna P. , 1986b, “Constitutive modelling for brittle dynamic fracture in dissipative solids,” Arch. Mechanics, 38, pp. 725–738.
34. Perzyna, P., 1995, “Interactions of elastic-viscoplastic waves and localization phenomena in solids,” Nonlinear Waves in Solids, Proc. IUTAM Symposium. Aug. 15–20, 1993, Victoria, Canada, (eds. L. J. Wegner and F. R. Norwood), ASME Book No. AMR 137, pp. 114–121.
35. Perzyna P. and DrabikA., 1989, “Description of micro-damage process by porosity parameter for nonlinear viscoplasticity,” Arch. Mechanics, 41, pp. 895–908.
36. Perzyna, P. and Drabik, A., 1999, “Micro-damage mechanism in adiabatic processes,” Int. J. Plasticity (submitted for publication).
37. Prager W. , 1955, “The theory of plasticity: A survey of recent achievements,” (J. Clayton Lecture), Proc. Inst. Mech. Eng., 169, pp. 41–57.10.1243/PIME_PROC_1955_169_015_02 ↗
38. Richtmyer, R. D., 1978, “Principles of Advance Mathematical Physics,” Vol. I, Springer, New York.10.1007/978-3-642-46378-5 ↗
39. Richtmyer, R. D. and Morton, K. W., 1967, Difference Methods for Initial-Value Problems, Wiley, New York.
40. Ristinmaa M. , 1995, “Cyclic plasticity model using one yield surface only,” Int. J. Plasticity, 11, pp. 163–181.10.1016/0749-6419(94)00044-1 ↗
41. Shima S. and OyaneM., 1976, “Plasticity for porous solids,” Int. J. Mech. Sci., 18, pp. 285–291.10.1016/0020-7403(76)90030-8 ↗
42. Shockey D. A. , SeamanL. and CurranD. R., 1985, “The microstatistical fracture mechanics approach to dynamic fracture problem,” Int. J. Fracture, 27, pp. 145–157.10.1007/BF00017964 ↗
43. Sidey, D. and Coffin, L. F., 1979, “Low-cycle fatigue damage mechanism at high temperature,” in Fatigue Mechanisms, Proc. ASTM STP 675 Symposium, Kansas City, Mo., May 1978 (ed. J. T. Fong), Baltimore, pp. 528–568.10.1520/STP35905S ↗
44. Strang, G. and Fix, G. J., 1973, An Analysis of the Finite Element Method, Prentice Hall, Englewood Cliffs, NJ.
45. Truesdell, C. and Noll W., 1965, “The nonlinear field theories,” Handbuch der Physik, Band III/3, Springer, Berlin, pp. 1–579.10.1007/978-3-642-46015-9_1 ↗
46. Van der Giessen E. , 1989, “Continuum models of large deformation plasticity, Part I: Large deformation plasticity and the concept of a natural reference state,” Eur. J. Mech., A/Solids, 8, pp. 1515.
47. Van der Giessen E. , 1989, “Continuum models of large deformation plasticity, Part II: A kinematic hardening model and the concept of a plastically induced orientational structure,” Eur. J. Mech., A/Solids, 8, pp. 8989.
48. Wang J.-D. , and OhnoN., 1991, “Two equivalent forms of nonlinear kinematic hardening. Application to nonisothermal plasticity,” Int. J. Plasticity, 7, pp. 637–650.10.1016/0749-6419(91)90048-4 ↗
49. Ziegler H. , 1959, “A modification of Prager’s hardening rule,” Quart. Appl. Math., 17, pp. 55–65.10.1090/qam/104405 ↗