Effect of Interference on the Mechanics of Load Transfer in Aircraft Fuselage Lap Joints
Source abstract
Abstract
Much of the fatigue damage in aircraft structures can be linked to the stress concentration arising at the rivet/skin interface in fuselage lap-joints. Fatigue damage can degrade the strength of the structure and reduce structural integrity. The stress distribution around the rivet holes, which depends on several loading conditions, is therefore of prime importance. Critical manufacturing process variations must be taken into account to observe the effect on local stresses at the hole. This paper presents three-dimensional (3D) nonlinear finite element analyses to investigate the stress state at rivet holes in fuselage lap joints. Initially, a 3D single rivet model of the riveting process was developed to characterize the unsymmetric residual stress distribution resulting from rivet installation. Then a global three-rivet model of the fuselage lap-joint, which takes into account the residual stresses from rivet installation and fuselage pressurization, was analyzed and compared to observations available from teardown inspection. The models were then implemented to observe the effects of rivet interference, sealant, and drill shavings on the stress state. A multiaxial fatigue criterion was implemented to predict cycles to crack nucleation for the modeled parameters. The effect of underdriven rivets and sealant were observed to be the most critical on the stress state of the fuselage splice. Excellent comparison with the damage characterization of the fuselage lap-joint provides validation to the finite element model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical Behavior of Composites · Mechanical Failure Analysis and Simulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Butler International, Peoria, IL 61614
The George W Woodruff School of Mechanical Engineering, 801 Ferst Drive N.W., Atlanta, GA 30313
References (42)
Show source-provided references
1. Destructive Evaluation and Extended Fatigue Testing of Retired Aircraft Fuselage Structure: Project Update
2. Multiple Site Damage in Riveted Lap-Joints: Experimental Simulation and Finite Element Prediction10.1016/S0142-1123(99)00129-2 ↗
3. Damage Characterization
4. Damage Characterization
5. Muller, R. P. , 1995, “An Experimental and Analytical Investigation on the Fatigue Behavior of Fuselage Riveted Lap-joints,” Ph.D. thesis, Delft University of Technology, Delft, The Netherlands.
6. Analysis of the Riveting Forming Mechanisms
7. Residual Stresses in and Around Rivets in Clad Aluminum Alloy Plates10.1016/0921-5093(94)90355-7 ↗
8. Interferences and Residual Stresses in Riveted Joints
9. Processes for Ensuring Long Life of Riveted and Bolted Joints in Aircraft Structures
10. Demina, N. I., and Volkov, A. K., 1989, “The Influence of the Interference of a Rivet on the Mechanical Properties of D16 Alloy Sheet in Biaxial Tension,” Cambridge Science Abstracts Aluminum Industry Abstracts, Accession No. 01901145-0483, 21, No. 3, March, pp. 407–409.
11. Estimation of the Reliability of Ultrasonic Quality Control of Riveted Joints with Clearance
12. Ultrasonic Assessment of the Radial Clearance of Riveted Joints in Aircraft Structures
13. Slater, W. J. , 1994, “Static Strength of Riveted Joints in Fiber Metal Laminates,” Ph.D. thesis, Delft University of Technology, Delft, The Netherlands.
14. Szolwinski, M. P., and Farris, T. N., 2000, “Linking Riveting Process Parameters to the Fatigue Performance of Riveted Aircraft Structures,” AIAA Pap.0146-3705, Paper No. 99-1339, pp. 1208–1218.
15. The Clamping Stress in a Cold Driven Rivet10.1016/S0020-7403(97)00089-1 ↗
16. Failure Mechanism of Riveted Joint in Fibre Metal Laminates10.1016/S0924-0136(00)00416-7 ↗
17. An Experimental and Numerical analysis of Riveted Single Lap-joints10.1243/PIME_PROC_1994_208_257_02 ↗
18. Riveted Single-Lap-Joints. Part 1: A Numerical Parametric Study10.1243/0954410971532460 ↗
19. Atre, A., and Johnson, W. S., 2004, “3-D FEA Simulations to Assess Residual Stresses in Riveting Processes,” Journal of ASTM International, to be published.10.1520/JAI13077 ↗
20. Iyer, K. A. , 1997, “Three-Dimensional Finite Element Analyses of the Local Mechanical Behavior of Riveted Lap-joints,” Ph.D. thesis, Materials Science and Engineering, Vanderbilt University, Nashville, TN.
21. Fatigue Strength of Adhesive/Rivet Combined Lap-joints10.1080/00218469508014356 ↗
22. Stress Analysis and Strength Evaluation of Single-Lap Adhesive Joints Combined with Rivets Under External Bending Moments10.1163/156856101743300 ↗
23. Analysis of the Effects of Thin Sealant Layers on Aircraft Structural Joints10.2514/2.6814 ↗
24. Harish, G., and Farris, T. N., 1999, “An Integrated Approach for Prediction of Fretting Crack Nucleation in Riveted Joints,” AIAA Pap.0146-3705 Paper No. 99-1340, pp. 1219–1226.
25. Modeling of Skin/Rivet Contact: Application to Fretting Fatigue
26. Shell Modeling of Fretting in Riveted Lapjoints10.2514/2.485 ↗
27. Harish, G., and Farris, T. N., 1998, “Effect of Fretting Contact Stresses on Crack Nucleation in Riveted Lap-Joints,” AIAA Pap.0146-3705, Paper No. 99-1340, pp. 98–1746.
28. Analytical Methodology for Predicting Fatigue Life Distribution of Fuselage Splices10.1016/S0142-1123(01)00127-X ↗
29. Piascik, R. S., Willard, S. A., and Miller, M., 1994, “The Characterization of Widespread Fatigue Damage in Fuselage,” NASA Paper No. 95N14920.
30. Wang, Y. , 1983, “A Study of Small Crack Growth Under Transport Spectrum Loading,” AGARD-CP-328 Paper No. 14.
31. Potter, J. M., and Yee, B. G. W., 1983, “Use of Small Crack Data to Bring About and Quantify Improvements to Aircraft Structural Integrity,” AGARD-CP-328 Paper No. 4.
32. Effect of the Riveting Process on the Residual Stress in Fuselage Lap-joints10.5589/q04-007 ↗
33. Hibbitt, Karlsson, and Sorensen, Inc., 2003, ABAQUS/Standard 6.4 User’s Manual, Pawtucket, RI.
34. Multiple-Site and Widespread Fatigue Damage in Aging Aircraft10.1016/S1350-6307(97)00020-4 ↗
35. A Stress-Strain Function for the Fatigue of Metals
36. Multiaxial Fatigue Damage Models10.1115/1.3225980 ↗
37. Boller
38. Fatigue-Life Prediction of Riveted Lapsplice Joints Using Small-Crack Theory
39. Harris, C. E., Piascik, R. S., and Newman, J. C., 2000, “A Practical Engineering Approach to Predicting Fatigue Crack Growth in Riveted Lap Joints,” Paper No. NASA/TM-2000-210106.
40. Eastaugh, G. F., Simpson, D. L., Straznicky, P. V., and Wakeman, R. B., 1995, “A Special Uniaxial Coupon Test Specimen for the Simulation of Multiple Site Fatigue Crack Growth and Link-up in Fuselage Skin Splices,” Paper No. NASA 96N24261.
41. Atre, A., and Johnson, W. S., 2007, “Analysis of the Effects of Sealant and Interference on Riveted Lap-Joints,” J. Aircr.0021-8669, in press.10.2514/1.18320 ↗
42. Finite Element and Experimental Studies on Single-Lap-joints in Tension10.1016/S0143-7496(00)00052-X ↗