journal article·2007-04-01

Effects of Platelet Size and Mean Volume Fraction on Platelet Orientation and Volume Fraction Distributions in Functionally Graded Material Fabricated by a Centrifugal Solid-Particle Method

P. D. Sequeira, Yoshimi Watanabe, Hiroyuki Eryu, Tetsuya Yamamoto, Kiyotaka Matsuura

Publisher page

Abstract

Background. A centrifugal solid-particle method has been successfully used as a means to fabricate functionally graded materials (FGMs). Various processing parameters significantly influence the formation of the graded microstructural and properties distribution in these FGMs. Method of Approach. Alloys with different Al3Ti platelet volume fractions and platelet sizes are used to study the effects of those parameters on graded distributions of the volume fraction and orientation of platelets. Al-platelet/plaster FGMs are used as a model system, and the effects of the same parameters are investigated. Results. It was found that an increase in initial volume fraction and particle size leads to steeper gradients of volume fraction and orientation distributions within the Al-Al3Ti FGMs. The results of the experimental studies are compared to those of the model material. Conclusions. It was verified that, although with some limitations, the proposed model system will be useful in the study of the formation mechanisms of the graded distributions in the FGMs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Composite Structure Analysis and Optimization · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

CIICS – Research Center on Interfaces and Surface Behavior, Universidade do Minho, Campus de Azurem, 4800-058 Guimaraes, Portugal

Department of Engineering Physics, Electronics and Mechanics, Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555, Japan

Department of Functional Machinery and Mechanics, Shinshu University, 3-15-1, Tokida, Ueda 386-8567, Japan

Division of Materials Science and Engineering, Hokkaido University, Kita-ku, Sapporo 060-8628, Japan

References (17)

Show source-provided references
1. Miyamoto
2. Fundamental Investigation of Functionally Gradient Material Manufacturing System Using Centrifugal Force10.1299/jsmec1988.34.144 ↗
3. Microstructures and Mechanical Properties of Functionally Graded Material Fabricated by a Centrifugal Method
4. Analysis of Thermal Residual Stress in a Thick-Walled Ring of Duralcan Base Al-SiC Functionally Graded Material10.1007/BF02595662 ↗
5. Control of Composition Gradient in a Metal-Ceramics Functionally Graded Material Manufactured by the Centrifugal Method10.1016/S1359-835X(97)00121-8 ↗
6. Orientation of Al3Ti Platelets in Al-Al3Ti Functionally Graded Material Manufactured by Centrifugal Method
7. Wear Behavior of Al-Al3Ti Composite Manufactured by a Centrifugal Method10.1007/s11661-999-0235-1 ↗
8. Evaluation of Three-Dimensional Orientation of Al3Ti Platelet in Al based FGMs Fabricated by a Centrifugal Casting Technique10.1016/S1359-6454(00)00384-0 ↗
9. Behavior of Discontinuous Fiber Composites: Fiber Orientation10.1002/pc.750030107 ↗
10. Prediction of Thermoelastic Properties in Short Fiber Composites Using Image Analysis Techniques10.1016/0266-3538(90)90011-S ↗
11. Anisotropy of Wear Resistance in Al-Al3Ti FGMs Fabricated by a Centrifugal Method
12. DeHoff
13. Particle Size Distributions of Functionally Graded Materials Fabricated by a Centrifugal Solid-Particle Method10.1016/S0266-3538(02)00023-4 ↗
14. Enhanced Mechanical Properties of Fe-Mn-Si-Cr Shape Memory Fiber/Plaster Smart Composite
15. Characterization of Fiber Orientation in Short-Fiber Composites10.1063/1.333230 ↗
16. Measurement of Fiber Orientation in Short-Fiber Composites10.1016/0956-7151(94)90266-6 ↗
17. Experimental and Theoretical Study on Suspended Particle Motion in Axially Rotating Drum