Mechanical Behavior of Recycled Polypropylene Composites Under Tensile, Bending, and Creep Loading: Experimental and Modeling
Source abstract
Abstract
By the 2000/53/CE directive, the European Union leads to develop the recycling process industry, specially the plastic one, for end of life vehicles (ELV). To value these recycled materials by an isofunction use, as for example for car semistructure elements, it is necessary for the mechanical properties to be better known. In this study, the effects of the recycling process on the mechanical behavior of polypropylene (PP)/elastomeric, talc particles filled or not, are presented, through different loading tests: tensile (small and finite strain), bending and creep tests. The failure, plasticity, and elasticity parameters modifications are established. Tensile and bending tests lead to some similar characteristics evolution as, for example elastic modulus values. The creep behavior evolution is more complex to understand. Both materials have a near finite strain macroscopic behavior so that, taking account of each component (talc, EPDM or EPR elastomeric part) the intrinsic behavior can be well described in the mechanical model finally presented.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer crystallization and properties · Natural Fiber Reinforced Composites · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Applied Mechanics, Université de Franche-Comté, FEMTO-ST Institute, 24 rue de l’Epitaphe, 25000 Besançon, France e-mail:
Université de Strasbourg, Institut de Mécanique des Fluides et des Solides/CNRS, 2 rue Boussingault, 67000 Strasbourg, France
References (25)
Show source-provided references
1. Failure Processes in Particulate Filled Polypropylene10.1016/0015-0568(83)90049-0 ↗
2. Studies on Polypropylene Composites Filled With Talc Particles Part I Mechanical Properties10.1007/BF01165994 ↗
3. Rheology of Polypropylene in the Solid State10.1007/BF00356330 ↗
4. Constrained Crystallization and Activity of Filler in Surface Modified Talc Polypropylene Composites10.1016/S0014-3057(96)00159-0 ↗
5. Localisation des déformations et mécanismes d’endommagements dans les polymères multiphasés
6. Structural Effect in the Creep Behavior of Thermoplastic Pressure Pipes at High Temperature—Role of Geometrical Defects10.1007/s00419-006-0070-4 ↗
7. Natural Ageing of Automotive Polymer Components: Characterisation of New and Used Poly(propylene) based Car Bumpers10.1002/1439-2054(20020601)287:6<404::AID-MAME404>3.0.CO;2-R ↗
8. Regenerative Recycling of Automotive Polymer Components: Poly(propylene) Based Car Bumpers10.1002/mame.200300001 ↗
9. Effects of Reprocessing Conditions on the Properties of Unfilled and Talc-Filled Polypropylene10.1016/0141-3910(96)00018-3 ↗
10. Mechanical Behavior of Composite Based Polypropylene: Recycling and Strain Rate Effects
11. Polymer Composites for the Automotive Industry: Characterisation of the Recycling Effect on the Strain Rate Sensitivity10.1080/13588260802030745 ↗
12. Effects of Recycling on the Microstructure and the Mechanical Properties of Isotactic Polypropylene10.1023/A:1017983907260 ↗
13. Effects of Temperature and Strain Rate on the Tensile Behavior of Unfilled and Talc-Filled Polypropylene. Part I: Experiments10.1002/pen.v42:12 ↗
14. Stress-Strain Behavior of High-Density Polyetylene Below the Yield Point: Effect of Unloading Rate10.1134/S0965545X08050040 ↗
15. Non Linear Strain Rate Dependency and Unloading Behavior of Semi-Cristalline Polymers10.2516/ogst:2006012 ↗
16. Principles of Structural-Mechanical Modeling of Polymers and Composites10.1134/S0965545X06090173 ↗
17. Strain Rate Effects on the Mechanical Response of Polypropylene-Based Composites Deformed at Small Strains10.1134/S0965545X08060126 ↗
18. Polypropylene/Talc/SEBS (SEBS-g-MA) Composites. Part 2. Mechanical Properties10.1016/j.compositesa.2005.01.011 ↗
19. Rubber Toughening in Polypropylene: A Review10.1002/(SICI)1097-4628(20000711)77:2<>1.0.CO;2-K ↗
20. Effect of Talc on the Properties of Polypropylene/Ethylene/Propylene/Diene Terpolymer Blends10.1002/app.v101:5 ↗
21. The Influence of Loading Rate and Concurrent Microstructural Evolution in Micrometric Talc- and Wollastonite-Reinforced High Isotactic Polypropylene Composites10.1016/j.msea.2004.03.035 ↗
22. Collyer10.1007/978-94-011-1260-4 ↗
23. Experimental Characterization of Deformation Damage in Solid Polymers Under Tension, and its Interrelation With Necking10.1016/S0020-7683(02)00184-1 ↗
24. Trantina · 3106
25. Addiego, F., G’Sell, C., Dahoun, A., and Hiver, J. M., 2002, Université d’été, APOLLOR 02, Nancy, France.