Inelastic Anisotropy of Inconel 718: Experiments and Mathematical Representation
Source abstract
Abstract
A generalized threshold function for viscoplastic materials, which can also serve as a yield function in rate-independent plasticity, is suggested for materials that exhibit a strength differential and/or a permanent volume change. The motivation for this type of a threshold function is that experiments, at both 25 and 650°C, on the nickel-based alloy Inconel 718 indicate that higher stresses occur in compression than in tension. Similar results have been obtained for martensitic steels and other metallic alloys at 25°C. A general approach for determining the inelastic flow dependence on each of the three stress invariants (I1,J2, and J3) is to follow stress paths where only one invariant is changing. Two classical experiments that do this are hydrostatic pressure and pure torsion, however many others are possible. Unfortunately, these stress paths generally require three-dimensional stress states, which are difficult to obtain in the laboratory. Thus, for experimental expediency, tests involving axial-torsional loading of thin-walled tubes can be used to determine the significance of the first and third stress invariants, I1 and J3, respectively. [S0094-4289(00)01303-7]
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Engineering Science and Mechanics, Penn State University, University Park, PA 16802
References (22)
Show source-provided references
1. Leslie, W. C., and Sober, R. J., 1967, “The strength of ferrite and of martensite as functions of composition, temperature, and strain rate,” Trans. ASM, 60, pp. 459–484.
2. Spitzig, W. A., Sober, R. J., and Richmond, O., 1975, “Pressure dependence of yielding and associated volume expansion in tempered martensite,” Acta Metall., 23, pp. 885–893.10.1016/0001-6160(75)90205-9 ↗
3. Eiselstein, H. L., 1965, “Metallurgy of a columbium-hardened nickel-chromium-iron alloy,” Advances in the Technology of Stainless Steels and Related Alloys, ASTM STP-369, American Society for Testing and Materials, Philadelphia, pp. 62–79.10.1520/STP43733S ↗
4. Huntington, 1968, “Inconel alloy 718,” Huntington Alloy Products Division, The International Nickel Co., Inc.
5. Sundararaman, M., Mukhopadhyay, P., and Banerjee, S., 1988, “Deformation behaviour of γ″ strengthened Inconel 718,” Acta Metall., 36, pp. 847–864.10.1016/0001-6160(88)90139-3 ↗
6. Worthem, D. W., Robertson, I. M., Leckie, F. A., Socie, D. F., and Altstetter, C. J., 1990, “Inhomogeneous deformation in Inconel 718 during monotonic and cyclic loadings,” Metall. Trans., 21A, pp. 3215–3220.10.1007/BF02647316 ↗
7. Gil, C. M., Lissenden, C. J., and Lerch, B. A., 1999, “Unusual nonlinear response of some metallic materials,” Mech. Mater., 31, pp. 565–577.10.1016/S0167-6636(99)00018-6 ↗
8. Gil, C. M., Lissenden, C. J., and Lerch, B. A., 1999, “Determination of yield in Inconel 718 for axial-torsional loading at temperatures up to 649°C,” J. Test. Eval., 27, pp. 327–336.10.1520/JTE12233J ↗
9. Kalish, D., and Cohen, M., 1969, “Anisotropy of properties in martensite as developed by thermomechanical treatments,” Trans. ASM,62, pp. 353–361.
10. Hirth, J. P., and Cohen, M., 1970, “On the strength-differential phenomenon in hardened steel,” Metall. Trans., 1, pp. 3–8.10.1007/BF02819235 ↗
11. Drucker, D. C. , 1973, “Plasticity theory, strength-differential (SD) phenomenon, and volume expansion in metals and plastics,” Metall. Trans., 4, pp. 667–673.10.1007/BF02643073 ↗
12. Mannan, S. L., and Rodriquez, P., 1973, “Strength differential effect in zirconium alloys,” Scr. Metall., 7, pp. 1069–1074.10.1016/0036-9748(73)90016-1 ↗
13. Olsen, R. J., and Angell, G. S., 1969, “The strength differential in two-phase alloys,” Trans. ASM,62, pp. 711–720.
14. Chait, R. , 1973, “The strength differential of steel and Ti alloys as influenced by test temperature and microstructure,” Scr. Metall., 7, pp. 351–354.10.1016/0036-9748(73)90054-9 ↗
15. Pollock, T., and Steif, P. S., 1998, “PRET: A university-industry partnership for research and transition of gamma titanium aluminides,” Annual Report, Carnegie Mellon University.
16. Arnold, S. M., and Saleeb, A. F., 1994, “On the thermodynamic framework of generalized coupled thermoelastic-viscoplastic-damage modeling” Int. J. Plast., 10, pp. 263–278.10.1016/0749-6419(94)90003-5 ↗
17. Ponter, A. R. S., and Leckie, F. A., 1976, “Constitutive relationships for the time-dependent plastic deformation in metals,” ASME J. Eng. Mater. Technol., 98, pp. 47–51.10.1115/1.3443336 ↗
18. Arnold, S. M., Saleeb, A. F., and Castelli, M. G., 1996, “A fully associative, nonlinear kinematic, unified viscoplastic model for titanium based matrices,” Life Prediction Methodology for Titanium Matrix Composites, W. S. Johnson, J. M. Larson, and B. N. Cox, eds., ASTM STP-1253, American Society for Testing and Materials, Philadelphia, pp. 231–256.10.1520/STP18226S ↗
19. Lissenden, C. J., Gil, C. M., and Lerch, B. A., 1999, “A methodology for determining rate-dependent flow surfaces for Inconel 718,” J. Test. Eval., 27, pp. 402–411.10.1520/JTE12169J ↗
20. Bridgman, P. W., 1952, Studies in large plastic flow and fracture, McGraw-Hill, New York.
21. Calloch, S., and Marquis, D., 1999, “Triaxial tension-compression tests for multiaxial cyclic plasticity,” Int. J. Plast., 15, pp. 521–549.10.1016/S0749-6419(99)00005-4 ↗
22. Drucker, D. C. , 1949, “Relation of experiments to mathematical theories of plasticity” ASME J. Appl. Mech., 16, pp. 349–357.10.1115/1.4010009 ↗