journal article·1995-10-01

Elastic Anisotropy Effect of Crystals on Polycrystal Fatigue Crack Initiation

N. J. Teng, T. H. Lin

Publisher page

Abstract

Fatigue bands have been observed in both monocrystalline and polycrystalline metals. Extrusions and intrusions at the free surface of fatigued specimens are favorable sites for fatigue crack nucleation. Previous studies (Lin and Ito, 1969; Lin, 1992) mainly concerned the fatigue crack initiation in aluminum and its alloys. The elastic anisotropy of individual crystals of these metals is insignificant and was accordingly neglected. However, the anisotropy of the elastic constants of some other metallic crystals, such as titanium and some intermetallic compounds, is not negligible. In this paper, the effect of crystal anisotropy is considered by using Eshelby’s equivalent inclusion method. The polycrystal analyzed is Ni3Al intermetallic compound. The plastic shear strain distributions and the cumulative surface plastic strain in the fatigue band versus the number of loading cycles were calculated, and the effect of crystal anisotropy on the growth of the extrusions was examined.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Composite Material Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, University of California, Los Angeles, Los Angeles, CA 90024

References (18)

Show source-provided references
1. Antonopoulos J. G. , BrownL. M., and WinterA. T., 1976, “Vacancy Dipoles in Fatigued Copper,” Philosophical Magazine, Vol. A34, pp. 549–563.10.1080/14786437608223793 ↗
2. Charsley P. , and ThompsonN., 1963, “The Behavior of Slip Lines on Aluminum Crystals under Reversed Stresses in Tension and Compression,” Philosophical Magazine, Vol. 8, pp. 77–85.10.1080/14786436308212489 ↗
3. Eshelby J. D. , 1957, “The Determination of the Elastic Field of an Ellipsoid, and related Problems,” Proc. Roy. Soc., Vol. A241, pp. 376–396.10.1098/rspa.1957.0133 ↗
4. Eshelby, J. D., 1961, “Elastic Inclusions and Inhomogeneities,” Progress in Solid Mechanics 2, I. N. Snedden and R. Hill, eds., North-Holland, Amsterdam, pp. 89–140.
5. Forsyth P. J. E. , 1954, “Some Further Observations on the Fatigue Process in Pure Aluminum,” J. Inst. Met., Vol. 82, pp. 449–454.
6. Lekhnitski, S. G., 1963, Theory of Elasticity of an Anisotropic Body, Holden-Day, San Francisco, pp. 129–134.
7. Lin S. R. , and LinT. H., 1983, “Initial Strain Field and Fatigue Crack Initiation Mechanics,” ASME Journal of Applied Mechanics, Vol. 50, pp. 367–372.10.1115/1.3167046 ↗
8. Lin, T. H., 1969, Theory of Inelastic Structures, Wiley, New York, pp. 44–48.
9. Lin, T. H., 1977, “Micromechanics of Deformation of Slip Bands under Monotonic and Cyclic Loading,” Reviews of the Deformation Behavior of Materials, P. Felham, ed., Freund Publishing House, Tel-Aviv, Israel, pp. 263–316.
10. Lin T. H. , 1992, “Micromechanics of Crack Initiation in High-Cycle Fatigue,” Advances in Applied Mechanics, Vol. 29, pp. 1–62.10.1016/S0065-2156(08)70163-7 ↗
11. Lin T. H. , and ItoY. M., 1969, “Mechanics of Fatigue Crack Nucleation Mechanism,” J. Mech. Phys. Solids, Vol. 17, pp. 511–523.10.1016/0022-5096(69)90006-4 ↗
12. Lin T. H. , and LinS. R., 1974, “Effect of Secondary Slip Systems on Early Fatigue Damage,” J. Mech. and Phys. Solids, Vol. 22, pp. 177–192.10.1016/0022-5096(74)90024-6 ↗
13. Lin T. H. , LinS. R., and WuX. Q., 1989, “Micromechanics of an Extrusion in High-Cycle Fatigue,” Philosophical Magazine, Vol. A59, pp. 1263–1276.10.1080/01418618908221174 ↗
14. Mughrabi, H., Wang, R., Differt, K., and Essmann, V., 1982, “Fatigue Crack Initiation by Cyclic Slip Irreversibilities in High-Cycle Fatigue,” Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage, ASTM STP 811, J. Lankford, D. J. Davidson, W. L. Morris, and R. P. Wei, eds., pp. 5–45.10.1520/STP30551S ↗
15. Mura, T., 1982, Micromechanics of Defects in Solids, Martinus Nijhoff Publishers. pp. 150–159.10.1007/978-94-011-9306-1_4 ↗
16. Parker, E. R., 1961, Mechanical Behavior of Materials at Elevated Temperatures, J. E. Dorn, ed., McGraw-Hill, New York, pp. 129–148.
17. Stoloff N. S. , 1989, “Physical and Mechanical Metallurgy of Ni3Al and its Alloys,” Int. Mater. Res., Vol. 34, pp. 153–183.10.1179/imr.1989.34.1.153 ↗
18. Yang S. W. , 1985, “Elastic Constants of a Monocrystalline Nickel-Base Superalloy,” Metallurgical Transactions A, Vol. 16A, pp. 661–665.10.1007/BF02814240 ↗