journal article·1997-04-01

Combined Bending and Torsional Fatigue of Woven Roving GRP

M. N. Aboul Wafa, A. H. Hamdy, A. A. El-Midany

Publisher page

Abstract

A study of biaxial fatigue of woven roving glass reinforced polyester (GRP) subjected to in-phase and out-of-phase cyclic bending and torsional moments is presented. To evaluate failure theories for this material, tests were conducted on two fiber orientations [0, 90] and [45, −45] tubes. The results showed that for [0, 90] composites the S-N curves in pure bending and in pure torsion are sufficient to predict life. For [45, −45] tubes, the value of the normal stress interaction component of the strength tensor, H12, has to be obtained. If the ratio of the global flexural stress amplitude, A, to the accompanied global shear stress, B, is less than 2, the value of H12 may be taken as presented by Tsai-Hahn theory. But, if A/B ≥ 2, the value of H12 has to be obtained from [45, −45] pure bending S-N curve, since the failure mode is a combination of interfacial shear and matrix failure. The out-of-phase loading results showed that the life of the specimens at high stress levels is less than that for the in-phase loading with the same peak values A and B.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Mechanical stress and fatigue analysis · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, Alexandria University, Alexandria, Egypt

References (21)

Show source-provided references
1. Aboul Wafa M. N. , HamdyA., and ShowaibE. A., “A New Testing Machine for Fatigue Under Combined Bending and Torsion Acting out of Phase,” Alex. Eng. J., Alex. Univ., Vol. 28, No. 4, 1989, pp. 113113.
2. Aboul Wafa M. N. , HamdyA., and ShowaibE. A., “Analytical Study to the out of phase combined Bending and Torsional Stresses,” Alex. Eng. J., Alex. Univ., Vol. 28, No. Oct. 1989, pp. 131131.
3. Azzi V. D. , and TsaiS. W., EXPH. Mech., Vol. 5, 1965, pp. 283283.
4. Chow P. C, “A cumulative Damage Rule for Fatigure of Composite Materials,” AFML-TR, Wright-Patterns on Air Force Base, Ohio 54533.
5. Cowin S. C. , “On the strength Anisotropy of Bone and Wood,” ASME Journal of Applied Mechanics, Vol. 46, No. 4, 1979, pp. 832832.10.1115/1.3424663 ↗
6. Daugherty R. L., “Composite Leaf Spring in Heavy Truck Applications,” Composite Materials, K. Kawata and T. Akasaka, eds., Proc. Japan-U.S. Conference, Tokyo, 1981.
7. Ellyin F. , and XiaZ., “A General Fatigue Theory and Its Application to Out-of-Phase Cyclic Loading,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 115, Oct. 1993, pp. 411411.10.1115/1.2904239 ↗
8. Francis P. H. , WalrathD. E., SimsD. S., and WeedD. N., “Biaxial Fatigue Loading of Notched Composites,” J. Composite Materials, Vol. 11, Oct. 1977, pp. 488488.10.1177/002199837701100410 ↗
9. Hashin Z. , “Fatigue Failure Criteria for Combined Cyclic Stress,” International Journal of Fracture, Vol. 17, 1981, pp. 101101.10.1007/BF00053514 ↗
10. Herrington P. D., Doucet A. B., Beard J. E., and Sabbaghian M., “Study of Delamination Damage around a Discontinuity in Composite Bending Fatigue Specimens,” Advanced Materials: Looking Ahead to the 21st Century National SAMPE Technical Conference Vol. 22, Pub. b.
11. Hill R. , Proc. Roy. Soc., Series A, 193, 1948, pp. 281281.
12. Hoffman O. J. , Composite Materials, 1, 1967, pp. 200200.10.1177/002199836700100210 ↗
13. Jones R. M., Mechanics of Composite Materials, McGraw-Hill, Kogakusha, Ltd. 1975.10.1115/1.3423688 ↗
14. Norris C. B. US Forest Products Lab., Report 1816, 1950.
15. Norris C. B., and McKinnon P. F., US Forest Products Lab., Report 1328, 1956.
16. Owen M. J., and Rice D. J., “Biaxial Strength Behaviour of Glass Fabric—Reinforced Polyester Resins,” Composites, Jan. 1981, pp. 13–25.10.1016/0010-4361(81)90395-5 ↗
17. Owen M. J. , GriffithsJ. R., “Evaluation of Biaxial Stress Failure Surfaces for a Glass Fabric Reinforced Polyester Resin Under Static and Fatigue-Loading,” J. of Mat. Sci., Vol. 13, No. 7, July 1978, p. 15211521.10.1007/BF00553209 ↗
18. Rizzo R. R., and Vicario A. A., “A Finite Element Analysis of Laminated Anisotropic Tubes,” J. Composite Materials, Vol. 4, July 1970.10.1177/002199837000400306 ↗
19. Tsai S. W. , and WuE. M., “A General Theory of Strength for Anisotropic Materials,” J. Composite Materials, Vol. 5, Jan. 1971, pp. 5858.10.1177/002199837100500106 ↗
20. Vicario A. A. , and RizzoR. R., “Effect of Length on Laminated Thin Tubes Under Combined Loading,” J. Composite Materials, Vol. 4, April 1970, pp. 274274.10.1177/002199837000400212 ↗
21. Wang S. S. , ChimE. S., SocieD. F., GauchelJ. V., and OlingerJ. L., “Tensile and Torsional Fatigue of Fiber-Reinforced Composites at Gryogenic Temperatures,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 104, Apr. 1982, pp. 121121.10.1115/1.3225046 ↗