journal article·2008-04-01

Numerical Modeling of Second-Phase Particle Effects on Localized Deformation

Kaan Inal, Hari M. Simha, Raja K. Mishra

Publisher page

Abstract

A new finite element analysis based on rate dependent crystal plasticity theory has been developed to investigate the effects of second-phase particles on the initiation and propagation of localized deformation in the form of shear bands. The new model can incorporate electron backscatter diffraction data into finite element analyses. The numerical analysis not only accounts for crystallographic texture (and its evolution) but also accounts for grain morphologies. A unit-cell approach has been adopted where an element or a number of elements of the finite element mesh are considered to represent a single crystal within the polycrystal aggregate. Second-phase particles in the form of finite elements with stiff elastic properties are randomly distributed within the unit cell. Numerical simulations of unixial tension, in-plane plane strain tension, and balanced biaxial tension have been performed by models with and without second-phase particles for a direct chill-cast AA5754 aluminum alloy sheet. The effects of various parameters, such as second-phase particle distribution, texture evolution, and strain paths on particle induced localized deformation patterns, are also investigated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Avenue West, ON, N2L 3G1, Canada

General Motors Research and Development Center, 30500 Mound Road, Warren, MI 48090-9055

References (15)

Show source-provided references
1. The Evolution of Technology for Materials Processing Over the Last 50Years: The Automotive Example10.1007/s11837-007-0022-7 ↗
2. Effect of Processing Route on the Spatial Distributions of Constituent Particles and Their Role in the Fracture Process in AA5754 Alloy Sheet Materials10.1016/j.msea.2006.12.052 ↗
3. Representative Volume Element for Non-Uniform Micro-Structure10.1016/S0927-0256(01)00257-9 ↗
4. 3D Finite Element Analysis of Particle-Reinforced Aluminum10.1016/S0921-5093(02)00094-1 ↗
5. Texture Development and Strain Hardening in Rate Dependent Polycrystals10.1016/0001-6160(85)90188-9 ↗
6. Finite Element Analysis of Localized Deformation in fcc Polycrystalline Sheets Under Plane Stress Tension10.1016/S0020-7683(02)00162-2 ↗
7. Crystal Plasticity Simulation of the Hydrostatic Bulge Test10.1016/j.ijplas.2003.11.010 ↗
8. Effects of Texture Gradients and Strain Paths on Localization Phenomena in Polycrystals10.1016/j.ijmecsci.2003.12.002 ↗
9. A Mesoscopic Approach for Predicting Sheet Metal Formability10.1088/0965-0393/12/3/011 ↗
10. Inal, K., and Lu, H., “Parallel Computing Techniques for Multi-Scale Modeling of Microstructure in Polycrystalline Metals,” Modell. Simul. Mater. Sci. Eng.0965-0393, to be submitted.
11. On Modeling the Elasto-Viscoplastic Response of Metals Using Polycrystal Plasticity10.1016/S0045-7825(98)00034-6 ↗
12. Path-Dependence of the Forming Limit Stresses in a Sheet Metal10.1016/j.ijplas.2006.05.005 ↗
13. The Influence of Particle Distribution and Volume Fraction on the Post-Necking Behavior of Aluminum Alloys10.1016/j.mechmat.2005.12.003 ↗
14. The Process of Shear Band Formation in Plane Strain Compression of fcc Metals: Effects of Orystallographic Texture10.1016/0167-6636(94)90062-0 ↗
15. An Analysis of Nonuniform and Localized Deformation in Ductile Single Crystals10.1016/0001-6160(82)90005-0 ↗