journal article·2002-07-01

Analytical Solution of a Borehole Problem Using Strain Gradient Plasticity

X.-L. Gao

Publisher page

Abstract

An analytical solution is presented for the borehole problem of an elasto-plastic plane strain body containing a traction-free circular hole and subjected to uniform far field stress. A strain gradient plasticity theory is used to describe the constitutive behavior of the material undergoing plastic deformations, whereas the generalized Hooke’s law is invoked to represent the material response in the elastic region. This gradient plasticity theory introduces a higher-order spatial gradient of the effective plastic strain into the yield condition to account for the nonlocal interactions among material points, while leaving other relations in classical plasticity unaltered. The solution gives explicit expressions for the stress, strain, and displacement components. The hole radius enters these expressions not only in nondimensional forms but also with its own dimensional identity, unlike classical plasticity-based solutions. As a result, the current solution can capture the size effect in a quantitative manner. The classical plasticity-based solution of the borehole problem is obtained as a special case of the present solution. Numerical results for the plastic region radius and the stress concentration factor are provided to illustrate the application and significance of the newly derived solution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nonlocal and gradient elasticity in micro/nano structures · Numerical methods in engineering · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering-Engineering Mechanics, Michigan Technological University, Houghton, MI 49931-1295

References (23)

Show source-provided references
1. Papanastasiou, P., and Vardoulakis, I., 1989, “Bifurcation Analysis of Deep Boreholes: II. Scale Effect,” Int. J. Num. Anal. Meth. Geomech., 13, pp. 183–198.10.1002/nag.1610130206 ↗
2. Papanastasiou, P., and Vardoulakis, I., 1992, “Numerical Treatment of Progressive Localization in Relation to Borehole Stability,” Int. J. Num. Anal. Meth. Geomech., 16, pp. 389–424.10.1002/nag.1610160602 ↗
3. Zervos, A., Papanastasiou, P., and Vardoulakis, I., 2001, “Modeling of Localization and Scale Effect in Thick-Walled Cylinders With Gradient Elastoplasticity,” Int. J. Solids Struct., 38, pp. 5081–5095.10.1016/S0020-7683(00)00337-1 ↗
4. Mendelson, A., 1968, Plasticity: Theory and Application, Macmillan, New York.
5. Gao, X.-L., and Rowlands, R. E., 1999, “Analytical Solution for the Plane Strain Inclusion Problem of an Elastic Power-Law Hardening Matrix Containing an Elastic Cylindrical Inclusion,” Int. J. Pressure Vessels Piping, 76, pp. 291–297.10.1016/S0308-0161(99)00002-2 ↗
6. Aifantis, E. C., 1996, “Higher Order Gradients and Size Effects,” Size-Scale Effects in the Failure Mechanisms of Materials and Structures, A. Carpinteri, ed., Chapman and Hall, London, pp. 231–242.
7. Aifantis, E. C. , 1984, “On the Microstructural Origin of Certain Inelastic Models,” ASME J. Eng. Mater. Technol., 106, pp. 326–330.10.1115/1.3225725 ↗
8. Aifantis, E. C. , 1987, “The Physics of Plastic Deformation,” Int. J. Plast., 3, pp. 211–247.10.1016/0749-6419(87)90021-0 ↗
9. Zbib, H. M., and Aifantis, E. C., 1988, “On the Localization and Post-Localization Behavior of Plastic Deformation, I, II and III,” Res. Mech., 23, pp. 261–305.
10. Mu¨hlhaus, H.-B., and Aifantis, E. C., 1991, “A Variational Principle for Gradient Plasticity,” Int. J. Solids Struct., 28, pp. 845–857.10.1016/0020-7683(91)90004-Y ↗
11. Zhu, H. T., Zbib, H. M., and Aifantis, E. C., 1997, “Strain Gradients and Continuum Modeling of Size Effect in Metal Matrix Composites,” Acta Mech., 121, pp. 165–176.10.1007/BF01262530 ↗
12. Hutchinson, J. W. , 2000, “Plasticity at the Micron Scale,” Int. J. Solids Struct., 37, pp. 225–238.10.1016/S0020-7683(99)00090-6 ↗
13. Fleck, N. A., Mu¨ller, G. M., Ashby, M. F., and Hutchinson, J. W., 1994, “Strain Gradient Plasticity: Theory and Experiments,” Acta Metall. Mater., 42, pp. 475–487.10.1016/0956-7151(94)90502-9 ↗
14. Stolken, J. S., and Evans, A. G., 1998, “A Microbend Test Method for Measuring the Plasticity Length Scale,” Acta Meter., 46, pp. 5109–5115.10.1016/S1359-6454(98)00153-0 ↗
15. Ma, Q., and Clarke, D. R., 1995, “Size Dependent Hardness of Silver Single Crystals,” J. Mater. Res., 10, pp. 853–863.10.1557/JMR.1995.0853 ↗
16. Nan, C. W., and Clarke, D. R., 1996, “Influence of Particle Size and Particle Fracture on the Elastic/Plastic Deformation of Metal Matrix Composites,” Acta Mater., 44, pp. 3801–3811.10.1016/1359-6454(96)00008-0 ↗
17. Aifantis, E. C. , 1999, “Strain Gradient Interpretation of Size Effects,” Int. J. Fract., 95, pp. 299–314.10.1007/978-94-011-4659-3_16 ↗
18. Vardoulakis, I., and Aifantis, E. C., 1995, “Heterogeneities and Size Effects in Geomaterials,” Mechanics of Materials with Discontinuities and Heterogeneities, A. Misra and C. S. Chang, eds., AMD-Vol. 201, ASME Press, New York, pp. 27–30.
19. Gao, X.-L. , 1994, “Finite Deformation Elasto-Plastic Solution for the Pure Bending Problem of a Wide Plate of Elastic Linear-Hardening Material,” Int. J. Solids Struct., 31, pp. 1357–1376.10.1016/0020-7683(94)90182-1 ↗
20. Gao, X.-L. , 1998, “A Mathematical Analysis of the Elasto-Plastic Plane Stress Problem of a Power-Law Material,” IMA J. Appl. Math., 60, pp. 139–149.10.1093/imamat/60.2.139 ↗
21. Gao, X.-L. , 1999, “An Exact Elastoplastic Solution for the Plane Wedge Problem of an Elastic Linear-Hardening Material,” Math. Mech. Solids, 4, pp. 289–306.10.1177/108128659900400302 ↗
22. Little, R. W., 1973, Elasticity, Prentice Hall, Englewood Cliffs, NJ.
23. Aifantis, E. C. , 1995, “Pattern Formation in Plasticity,” Int. J. Eng. Sci., 33, pp. 2161–2178.10.1016/0020-7225(95)00086-D ↗