journal article·2006-07-01

Application of EDM Hole-Drilling Method to the Measurement of Residual Stress in Tool and Carbon Steels

Hwa-Teng Lee, Joachim Mayer, Fu-Chuan Hsu, Werner P. Rehbach, Thomas Weirich, Arbi Dimyati, Tzu-Yao Tai

Publisher page

Abstract

This study adopts the application of the electrodischarge machining (EDM) hole-drilling method to the measurement of residual stress in AISI D2 cold work tool steel, AISI H13 hot work tool steel, and AISI 1045 medium carbon steel. A calibration procedure based on the thermal conductivity of the material is conducted to compensate for the additional compressive stress induced in the workpiece by the EDM hole-drilling operation. Since the formation of this white layer influences the magnitude of the induced stress, the scanning electron microscopy, transmission electron microscopy, and nanoindentation techniques are used to examine the microstructure and hardness of the white layer resolidified on the EDMed surface. The experimental results reveal that combination of the hole-drilling strain-gage method (ASTM standard E837) with an EDM drilling process provides the effective means of determining the residual stress in materials with high hardness and good wear resistance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, National Cheng Kung University, No. 1, Dashiue Road, 70101 Tainan City, Taiwan

Central Facility for Electron Microscopy (GFE), RWTH-Aachen University, Ahornstr. 55, D-52074 Aachen, Germany

Metal Industries Research & Development Centre (MIRDC), Micro/Meso Mechanical Manufacturing R&D Department, Mold and Precision Machining Technology Section, 1001 Kaonan Highway, 81101 Kaohsiung City, Taiwan

Department of Mechanical Engineering, Southern Taiwan University of Technology (STUT), No. 1, Nan-Tai Street, 71005 Yungkang City, Taiwan

References (29)

Show source-provided references
1. Overview Residual Stress Part 1-Measurement Techniques
2. Brief Investigation of Induced Drilling Stresses in the Center-Hole Method of Residual-Stress Measurement10.1007/BF02325700 ↗
3. Comparison of Four Hole-Producing Techniques for the Center-Hole Residual-Stress Measurement Method10.1111/j.1747-1567.1985.tb02036.x ↗
4. Towards a Better Understanding of the Surface Features of Electro-Discharge Machined Tool Steels10.1016/0924-0136(90)90212-D ↗
5. Solidification Microstructure of Electrodischarge Machined Surfaces of Tool Steels
6. Residual Stress Distribution and Structural Phenomena of High-Strength Steel Surfaces Due to EDM and Ball-Drop Forming10.1016/S0007-8506(07)61694-1 ↗
7. The Surface Integrity of a Die Steel After Electrodischarge Machining: 2 Residual Stress Distribution10.1179/sur.1991.7.2.154 ↗
8. Influence of EDM Pulse Energy on the Surface Integrity of Martensitic Steels10.1016/S0924-0136(98)00082-X ↗
9. Quantification of Surface Damage of Tool Steels After EDM10.1016/0890-6955(88)90050-8 ↗
10. Simplification of the Hole-Drilling Method of Residual Stress Measurement
11. Lu, J. , 1996, “Handbook of Measurement of Residual Stresses,” Society for Experimental Mechanics.
12. The Feasible Evaluation of EDM Hole-Drilling Method for Residual Stress Measurement
13. The Study of EDM Hole-Drilling Method for Measuring Residual Stress in SKD11 Tool Steel
14. Determination of Initial Stress by Measuring the Deformation Around Drilled Holes
15. Application of Finite Element Calculations to Residual Stress Measurement10.1115/1.3224988 ↗
16. Measurement of Non-Uniform Residual Stresses Using the Hole-Drilling Method. Part I. Stress Calculation Procedures10.1115/1.3226059 ↗
17. Study of Surface Integrity Using the Small Area EDM Process With a Copper-Tungsten Electrode10.1016/j.msea.2003.08.046 ↗
18. The Study of EDMed Residual Stress by Taguchi Method
19. Characteristic Analysis of EDMed Surface Using the Taguchi Approach10.1080/10426910008913021 ↗
20. Influence of EDM Process Parameter on Surface Defects and Roughness
21. The Study of Protecting Crack Formation on the EDMed Surface
22. Relationship Between EDM Parameters and Surface Crack Formation10.1016/S0924-0136(03)00688-5 ↗
23. The Study of Crack Sensitivity of Steel on the EDMed Surface
24. Relationship Between Electrode Size and Surface Cracking in the EDM Machining Process10.1023/B:JMSC.0000047541.95138.17 ↗
25. The Surface Integrity of a Die Steel After Electro-Discharge Machining: 1 Structure, Composition, and Hardness10.1179/sur.1991.7.2.154 ↗
26. Microstructure at Submicro Scale of the White Layer Produced by EDM Machining10.1016/j.jmatprotec.2003.11.047 ↗
27. Macroscopic and Microscopic Phenomena of Electro-Discharge Machined Steel Surfaces: An Experimental Investigation10.1016/0378-3804(87)90047-7 ↗
28. Understanding Die-Sinking EDM Surface Integrity
29. Quantitative Expressions for Some Aspects of Surface Integrity of Electro Discharge Machined Components10.1115/1.3185929 ↗