journal article·1996-07-01

Symmetric Branching of Mode II and Mixed-Mode Fatigue Crack Growth in a Stainless Steel

Cai-Fu Qian, Ming-O Wang, Bao-Juan Wu, Shu-Ho Dai, J. C. M. Li

Publisher page

Abstract

Symmetric branching was found in all fatigue experiments carried out in a cruciform specimen in which the initial crack was in the middle of the specimen and at 45 deg with respect to the loading axes. The loading was biaxial, sinusoidal along each axis and out-of-phase from each other. Stress intensity factor calculations using finite element methods showed ΔKII was almost zero along each branch for all four branches so that all branches were Mode I cracks. The propagation of branched Mode I cracks in the initial Mode II damaged zone was faster than in their own Mode I zone created afterwards. The two dominantly branched cracks shielded the other small cracks appeared during the initiation of branching.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Mechanical stress and fatigue analysis · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Nanjing Institute of Chemical Technology, Nanjing, Jiangsu 210009, P.R. China

Department of Mechanical Engineering, University of Rochester, Rochester, NY 14627

References (15)

Show source-provided references
1. Akid, R., and Miller, K. J., 1991, “Short Fatigue Crack Growth Behaviour of A Low Carbon Steel Under Corrosion Fatigue Conditions,” Fatigue Fract. Engng Mater. Struct., pp. 637–649.10.1111/j.1460-2695.1991.tb00693.x ↗
2. Aliabadi, M. H., and Rooke, D. P., 1991, Numerical Fracture Mechanics, Kluwer Academic Publishers, London.10.1007/978-94-011-3360-9 ↗
3. Li R. , and ChudnovskyA., 1994, “Energy Release Rate of Crack Kinking With An Anisotropic Inclusion,” Int. J. Fract., 65, R3–R10R3–R10.10.1007/BF00017146 ↗
4. Liu H. W. , 1985, “Shear Fatigue Crack Growth: A Literature Survey,” Fatigue Fract. Engng Mater. Struct., Vol. 8, No. 4, pp. 295–313.10.1111/j.1460-2695.1985.tb00429.x ↗
5. Meguid S. A. , GaultierP. E., and GongS. X., 1991, “A Comparison Between Analytical and Finite Element Analysis of Main Crack-Microcrack Interaction,” Engng Fract. Mech., Vol. 38, No. 6, pp. 451–465.10.1016/0013-7944(91)90095-I ↗
6. Montagut E. , and KachanovM., 1988, “On Modelling A Micraocracked Zone By “Weakened” Elastic Material and on Statistical Aspects of Crack-Microcrack Interactions,” Int. J. Fract., Vol. 37, pp. R55–R62R55–R62.10.1007/BF00032537 ↗
7. Nayeb-Hashem H. , and TaslimM. E., 1987, “Effects of the Transient Mode II on the Steady State Crack Growth in Mode I,” Engng Fract. Mech., Vol. 26, No. 6, pp. 789–807.10.1016/0013-7944(87)90029-4 ↗
8. Qian, 1995, “On Mixed-Mode Fatigue Crack Propagation And Dislocation Emission from A Mode I Crack,” Ph.D thesis, Nanjing Institute of Chemical Technology, P. R. China.
9. Qian, C. F., Wang, M. O., Wu, B. J., Dai, S. H., and Li, J. C. M., “Mixed-Mode Fatigue Crack Growth in Stainless Steels Under Biaxial Loading,” Preceeding paper.
10. Smith E. , 1993, “When Can We Apply LEFM Principles to Elastic Softening Materials,” Int. J. Fract., 64, pp. 285–298.10.1007/BF00017846 ↗
11. Suresh, S., 1992, Fatigue of Materials, University Press, Cambridge, U.K.
12. Wang, M. O., Hu, R. H., Zhang, C. J., and Dai, S. H., 1992, “An Experimental Investication on the Fatigue Crack Growth in Mode II Condition,” Proceedings, 7th Int. Conf. Pressure Vessel Technol., Germany, Vol. 2, pp. 1413–1427.
13. Yuuki R. , AkitaK., and KishiN., 1989, “The Effect of Biaxial Stress State and Changes of State on Fatigue Crack Growth Behavior,” Fatigue Fract. Engng Mater. Struct., Vol. 12, No. 2, pp. 93–103.10.1111/j.1460-2695.1989.tb00516.x ↗
14. Zhou J. , ZhongJ., FengZ., and LiN., 1993, “Growth Behaviour of Small Fatigue Cracks,” Int. J. Fatigue15, No. 2, pp. 141–144.10.1016/0142-1123(93)90008-E ↗
15. Zuidema J. , 1991, “Explanation of the Observed Decrease in Fatigue Crack Growth Rate in Al 2024 Under Constant-ΔK Loading Using Crack Growth Resistance Models,” Int. J. Fatigue13, No. 1, pp. 73–78.10.1016/0142-1123(91)90130-Q ↗