journal article·2015-07-01

Finite Element Modeling of Shot Peening Residual Stress Relaxation in Turbine Disk Assemblies

S. A. Meguid, Luke A. Maricic

Publisher page

Abstract

Surface enhancement techniques such as shot peening are extensively used to increase the fatigue life of components in gas turbine engines. Due to the combined thermomechanical nature of the loading encountered within an engine, aeroengine designers have avoided incorporating the beneficial effects in their analysis. This can lead to overdesign and early retirement of critical engine components. A finite element modeling procedure is introduced that incorporates the shot peening residual stresses on a fir-tree turbine disk assembly. Unlike traditional equivalent loading approaches, the method models the actual impact of shots on the assembly and is the first time this approach is used to introduce peening residual stresses in turbine disks. In addition, the stability of these residual stresses in response to cyclic thermomechanical loadings at the contact interface is also studied. The results reveal that thermomechanical overload can nearly fully relax the shot peening residual stresses within the first cycle due to the combined effects of decreased material yield strength and plastic deformation. This work will enable aeroengine designers to assess critical surface treated components for structural integrity, optimal design, and residual life.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Tribology and Wear Analysis · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Professor Fellow ASME Mechanics and Aerospace Design Laboratory, Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, ON M5S 3G8, Canada e-mail:

Mechanics and Aerospace Design Laboratory, Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, ON M5S 3G8, Canada

References (30)

Show source-provided references
1. Theoretical and Experimental Studies of Fretting-Initiated Fatigue Failure of Aeroengine Compressor Discs10.1111/j.1460-2695.1994.tb00253.x ↗
2. Simulation Methodology Development for Rotating Blade Containment Analysis10.1631/jzus.A1100294 ↗
3. 2D & 3D FE Analysis of Fir-Tree Joints in Aeroengine Discs
4. Critical Issues in High Cycle Fatigue
5. High Cycle Fatigue in Aircraft Gas Turbines—An Industry Perspective
6. Prevey, P., Shepard, M. J., and Smith, P. R., 2001, “The Effect of Low Plasticity Burnishing (LPB) on the HCF Performance and FOD Resistance of Ti–6Al–4V,” 6th National Turbine Engine High Cycle Fatigue (HCF) Conference, Jacksonville, FL, Mar. 5–8.
7. The Measurement of Subsurface Residual Stress and Cold Work Distributions in Nickel Based Alloys
8. Ezeilo, A., Webster, G., Webster, P. J., and Webster, P. S., 1993, “Comparison of Shot Peening Residual Stress Distributions in a Selection of Materials,” 5th International Conference on Shot Peening, Oxford, UK, Sept. 13–17, Paper No. 1993079, pp. 274–281.http://www.shotpeener.com/library/detail.php?anc=1993079
9. Finite Element Modelling of Shot-Peening Residual Stresses
10. Three-Dimensional Dynamic Finite Element Analysis of Shot-Peening Induced Residual Stresses10.1016/S0168-874X(98)00057-2 ↗
11. 3D FE Analysis of Peening of Strain-Rate Sensitive Materials Using Multiple Impingement Model10.1016/S0734-743X(01)00043-4 ↗
12. Development and Validation of Novel FE Models for 3D Analysis of Peening of Strain-Rate Sensitive Materials10.1115/1.2712469 ↗
13. Shot Peen Forming Sheet Metal: Finite Element Prediction of Deformed Shape
14. Finite Element Analysis of Shot Peening
15. A Process Model for Shot Peen Forming10.1016/j.jmatprotec.2005.09.006 ↗
16. Zhuang, W. Z., and Halford, G. R., 2001, “Investigation of Residual Stress Relaxation Under Cyclic Load,” Int. J. Fatigue, 23(S1), pp. 31–37.10.1016/S0142-1123(01)00132-310.1016/S0142-1123(01)00132-3 ↗
17. Experimental Measurement and Finite Element Simulation of the Interaction Between Residual Stresses and Mechanical Loading10.1016/S0142-1123(00)00104-3 ↗
18. Prevey, P., 2000, “FOD Resistance and Fatigue Crack Arrest in Low Plasticity Burnished IN718,” 5th National Turbine Engine High Cycle Fatigue Conference, Chandler, AZ, Mar. 7–9.
19. Lu, J., and Flavenot, J. F., 1987, “Use of a Finite Element Method for the Prediction of the Shot-Peened Residual Stress Relaxation During Fatigue,” 3rd International Conference on Shot Peening, (ICSP3), Garmish-Partenkirchen, Germany, September, Paper No. 1987105, pp. 391–398.http://www.shotpeener.com/library/detail.php?anc=1987105
20. Thermomechanical Relaxation of Residual Stress in Shot Peened Nickel Base Superalloy10.1179/mst.1994.10.11.947 ↗
21. Relaxation of Peening Residual Stresses Due to Cyclic Thermo-Mechanical Overload10.1115/1.1867986 ↗
22. A Finite Element Study of Thermal Relaxation of Residual Stress in Laser Shock Peened IN718 Superalloy10.1016/j.ijimpeng.2011.02.006 ↗
23. Probabilistic High-Cycle Fretting Fatigue Assessment of Gas Turbine Engine Components10.1115/1.4005975 ↗
24. Structural Integrity Analysis of an Aeroengine Disc
25. Finite Element Analysis of Fir-Tree Region in Turbine Discs10.1016/S0168-874X(99)00072-4 ↗
26. Metallic Materials Properties Development and Standardization (MMPDS)
27. The Effect of Prior Cold Work on Tensile Residual Stress Development in Nuclear Weldments10.1115/1.1481035 ↗
28. Mechanics of Solid Materials10.1061/(ASCE)0733-9399(1993)119:3(642.2) ↗
29. Methodology for Structural Integrity Analysis of Gas Turbine Blades10.5028/jatm.2012.04014311 ↗
30. A Literature Survey on the Stability and Significance of Residual Stresses During Fatigue10.1111/j.1460-2695.2007.01102.x ↗