Modeling Strain Localization Using a Plane Stress Two-Particle Model and the Influence of Grain Level Matrix Inhomogeneity
Source abstract
Abstract
The role of dilute small particles on the development of strain localization under uniaxial tension has been studied by finite element analysis using a plane stress model with two small hard particles embedded in Al matrix. The influence of particle alignment and interparticle spacing in a homogeneous and inhomogeneous matrix are investigated. When the matrix material is a homogeneous continuum, there are small localization strains when close packed and aligned along the loading direction. In the case of an inhomogeneous matrix with grains of different strengths represented by their Taylor factors, the location of localization band is insensitive to the interparticle spacing, but mainly determined by grain-level inhomogeneity. This is because the particles are dilute and small compared with the matrix grains. The particles, however, can decrease the localization strains when they straddle the localization band.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, McMaster University, Hamilton, ON, L8S 4L7, Canada
Department of Mechanical Engineering, McMaster University, Hamilton, ON, L8S 4L7, Canada
General Motors Research and Development Center, Mail Code 480-106-212, 30500 Mound Road, Warren, MI 48090-9055
References (26)
Show source-provided references
1. Mesh Effects in the Analysis of Dynamic Ductile Crack-Growth10.1016/0013-7944(94)90239-9 ↗
2. Strain Localization Observed During Shearing of Some Aluminum Alloys and Texture Softening Predicted by FC Taylor and Advanced Lamel Model
3. Texture Prediction of an AA3004 Aluminum Alloy With the Occurrence of Strain Localization During Simple Shear Using a Multiscale Modeling Procedure
4. Microstructure Evolution and Strain Localization During Shear Deformation of an Aluminum Alloy10.1016/S1359-6454(96)00046-8 ↗
5. Prediction of Shear Localization During Large Deformation of a Continuous Cast Al-Mg Sheet10.1016/j.msea.2004.11.062 ↗
6. Analysis of Surface Roughening in AA6111 Automotive Sheet10.1016/j.actamat.2003.12.039 ↗
7. Influence of Spatial Grain Orientation Distribution on Sheet Metal Necking
8. Finite Element Modeling of Crystal Plasticity with Grains Shaped as Truncated Octahedrons10.1016/j.ijplas.2006.01.008 ↗
9. Effects of Spatial Grain Orientation Distribution and Initial Surface Topography on Sheet Metal Necking10.1016/j.ijplas.2006.11.005 ↗
10. Effect of Processing Route on the Spatial Distributions of Constituent Particles and Their Role in the Fracture Process in AA5754 Alloy Sheet Materials
11. A Micromechanics Study on Strain-Localization-Induced Fracture Initiation in Bending Using Crystal Plasticity Models10.1080/01418610010019620 ↗
12. Modeling the Influence of Grain-Level Matrix Inhomogeneity on Strain Localization in the Presence of Hard Particles10.1088/0965-0393/15/8/006 ↗
13. Evolution of Matt Surface Topography in Aluminum Pack Rolling—Part I: Model Development10.1016/j.ijmecsci.2004.07.004 ↗
14. Evolution of Matt Surface Topography in Aluminum Pack Rolling—Part II: Effect of Material Properties10.1016/j.ijmecsci.2004.07.005 ↗
15. Deformation Texture Prediction: From the Taylor Model to the Advanced Lamel model10.1016/j.ijplas.2004.04.011 ↗
16. A Mesoscopic Approach for Predicting Sheet Metal Formability10.1088/0965-0393/12/3/011 ↗
17. Three-Dimensional (3D) Microstructure Visualization and Finite Element Modeling of the Mechanical Behavior of SiC Particle Reinforced Aluminum Composites10.1016/j.scriptamat.2004.03.043 ↗
18. Micromechanical Finite Element Analysis of Metal Matrix Composites Using Nonlocal Ductile Failure Models
19. Material Rate Dependence and Mesh Sensitivity in Localization Problems10.1016/0045-7825(88)90069-2 ↗
20. Investigation of Strain Localization in Aluminum Alloys
21. Recent Studies of Local Texture and Its Influence on Failure10.1016/S0921-5093(98)00835-1 ↗
22. Micromechanical and Macromechanical Effects in Grain Scale Polycrystal Plasticity Experimentation and Simulation10.1016/S1359-6454(01)00242-7 ↗
23. An Experimental-Study of the Effect of Sheet Thickness and Grain-Size on Limit Strains in Biaxial Stretching10.1016/0020-7403(83)90017-6 ↗
24. 2D and 3D Visualization of Ductile Fracture10.1002/adem.200600034 ↗
25. Three Dimensional Analysis of Dynamic Ductile Crack Growth in a Thin Plate10.1016/0022-5096(95)00087-9 ↗
26. Three Dimensional Microstructural Effects on Plane Strain Ductile Crack Growth10.1016/j.ijsolstr.2005.05.057 ↗