journal article·2000-01-01

Interfacial Stresses and Void Nucleation in Discontinuously Reinforced Composites

T. C. Tszeng

Publisher page

Abstract

This paper presents the theoretical predictions of the stress state at the inclusion-matrix interface in discontinuous metal matrix composites by the generalized inclusion method. In the author’s previous works, this method had been extended to the elastoplastic deformation in the matrix material. The present analysis of the ellipsoidal inclusion problem indicates that the regions at the pole and the equator of the particle/matrix interface essentially remain elastic regardless of the level of deformation, although the size of the elastic region keeps decreasing as deformation becomes larger. It was also found that, when the composite is undergoing a relatively large plastic deformation (strain), the maximum interfacial normal stress is approximately linearly dependent upon the von Mises stress and the hydrostatic stress. Based on the stress criterion for void nucleation, the author determined the void nucleation loci and nucleation strain for a composite subjected to an axisymmetric macroscopic stress state. The influence of interfacial bonding strength, inclusion shape, and volume fraction on the occurrence of void nucleation have been determined. The interfacial bonding strength in a SiC-aluminum system was re-evaluated by using existing experimental evidence. [S0094-4289(00)01301-3]
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Composite Material Mechanics · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical, Materials and Aerospace Engineering, Illinois Institute of Technology, Chicago, IL 60616

References (29)

Show source-provided references
1. Fisher, J. R., and Gurland J., 1981, “Void Nucleation in Spheroidized Carbon Steels Part 2: Model,” Metal Sci., pp. 193–202.10.1179/030634581790426660 ↗
2. Brown, L. M., and Stobbs, W. M. 1971, “The Work-hardening of Copper-Silica. I. A Model Based on Internal Stresses, with no Plastic Relaxation: II. The Role of Plastic Relaxation,” Philos. Mag., 23, pp. 1185–1233.
3. Goods, S. H., and Brown, L. M. 1979, “The Nucleation of Cavities by Plastic Deformation,” Acta Metall., 27, pp. 1–15.
4. Argon, A. S., Im, J., and Safoglu, R., 1975, “Cavity Formation from Inclusions in Ductile Fracture,” Metall. Trans., 6A, pp. 825–837.10.1007/BF02672306 ↗
5. Hunt Jr., W. H., Richmond, O., and Young, R. D., 1989, “Fracture Initiation in Particle Hardened Materials with High Volume Fraction,” ICCM/VI, 2, pp. 2.209–223
6. Embury, J. D. , 1985, “Plastic Flow in Dispersion Hardened Materials,” Metall. Trans., 16A, p. 21912191.10.1007/BF02670418 ↗
7. LeRoy, G., Embury, J. D., Edward, G., and Ashby, M. F., 1981, “A Model of Ductile Fracture Based on the Nucleation and Growth of Voids,” Acta Metall., 29, pp. 1509–1522.10.1016/0001-6160(81)90185-1 ↗
8. Needleman, A. , 1987, “A Continuum Model for Void Nucleation by Inclusion Debonding,” ASME J. Appl. Mech., 54, pp. 525–531.10.1115/1.3173064 ↗
9. Tszeng, T. C. , 1993, “A Model of Void Nucleation from Ellipsoidal Inclusions,” Scr. Metall. Mater., 28, pp. 1065–1070.10.1016/0956-716X(93)90011-G ↗
10. Tvergaard, V. , 1990, “Analysis of Tensile Properties for a Whisker-Reinforced Metal-Matrix Composite,” Acta Metall. Mater., 38, pp. 185–194.10.1016/0956-7151(90)90048-L ↗
11. Weng, B. J., Chang, S. T., and Shiau, J. S., 1992, “Microfracture Mechanisms of SiC-6061 Aluminum Composites after Hipping,” Scr. Metall. Mater., 27, pp. 1127–1132.10.1016/0956-716X(92)90586-4 ↗
12. Lloyd, D. J. , 1989, “The Solidification Microstructure of Particulate Reinforced Aluminum/SiC Composites,” Compos. Sci. Technol., 35, pp. 159–179.10.1016/0266-3538(89)90093-6 ↗
13. Barnes, S. J., Prangnell, P. B., Roberts, S. M., and Withers, P. J., 1995, “The Influence of Temperature on Microstructural Damage During Uniaxial Compression of Aluminum Matrix Composites,” Scr. Metall. Mater., 33, pp. 323–329.10.1016/0956-716X(95)00144-K ↗
14. Christman, T., and Suresh, S., 1988, “Effects of SiC Reinforcement and Aging Treatment on Fatigue Crack Growth in an Al-SiC Composite,” Mater. Sci. Eng., A102, pp. 211–216.10.1016/0025-5416(88)90576-9 ↗
15. Vasudevan, A. K., Richmond, O., Zok, F., and Embury, D., 1989, “The Influence of Hydrostatic Pressure on the Ductility of Al-SiC Composites,” Mater. Sci. Eng., A107, pp. 63–69.10.1016/0921-5093(89)90375-4 ↗
16. Thomson, R. D., and Hancock, J. W., 1984, “Local Stress and Strain Fields near a Spherical Elastic Inclusion in a Plastically Deforming Matrix,” Int. J. Fract., 24, pp. 209–228.10.1007/BF00032684 ↗
17. Flom, Y., and Arsenault, R. J., 1986, “Interfacial Bond Strength in an Aluminum Alloy 6061-SiC Composite,” Mater. Sci. Eng., 77, pp. 191–197.10.1016/0025-5416(86)90368-X ↗
18. Tszeng, T. C. , 1994, “Micromechanics Characterization of Unidirectional Composites during Multiaxial Plastic Deformation,” J. Compos. Mater., 28, pp. 800–820.10.1177/002199839402800902 ↗
19. Eshelby, J. D. , 1957, “The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems,” Proc. R. Soc. London, Ser. A, A241, pp. 376–396.10.1098/rspa.1957.0133 ↗
20. Mori, T., and Tanaka, K., 1973, “Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusion,” Acta Metall., 21, p. 571571.10.1016/0001-6160(73)90064-3 ↗
21. Tszeng, T. C. , 1994, “Micromechanics of Partially Aligned Short Fiber Composites with Reference to Deformation Processing,” Compos. Sci. Technol., 51, pp. 75–84.10.1016/0266-3538(94)90158-9 ↗
22. Christensen, R. M. , 1990, “A Critical Evaluation for a Class of Micromechanics Models,” J. Mech. Phys. Solids, 38, pp. 379–404.10.1016/0022-5096(90)90005-O ↗
23. Christman, T., Needleman, A., and Suresh, S., 1989, “An Experimental and Numerical Study of Deformation in Metal-Ceramic Composites,” Acta. Metall., 37, pp. 3029–3050.10.1016/0001-6160(89)90339-8 ↗
24. Goodier, J. N. , 1933, ASME J. Appl. Mech., 55, pp. 39–44 (see Thomson and Hancock, 1984)10.1115/1.4012173 ↗
25. Orr, J., and Brown, D. K., 1974, “Elasto-Plastic Solution for a Cylindrical Inclusion in Plane Strain,” Eng. Fract. Mech., 6, pp. 261–274.10.1016/0013-7944(74)90024-1 ↗
26. Mochida, T., Taya, M., and Lloyd, D. J., 1991, “Fracture of Particles in a Particle/Metal Matrix Composite under Plastic Straining and Its Effect on the Young’s Modulud of the Composite,” Mater. Trans., JIM, 32, pp. 931–942.10.2320/matertrans1989.32.931 ↗
27. Rack, H. J., and Rathaparkhi, P., 1988, “Damage Tolerance in Discontinuously Reinforced Metal-Matrix Composites,” J. Met., pp. 55–57.10.1007/BF03258812 ↗
28. Dieter, G. E., 1976, Mechanical Metallurgy, 2nd edition, McGraw-Hill, New York.
29. Hancock, J. W., and Mackenzie, A. C., 1976, “On the Mechanisms of Ductile Failure in High-Strength Steels Subjected to Multi-axial Stress-States,” J. Mech. Phys. Solids, 24, pp. 147–169.10.1016/0022-5096(76)90024-7 ↗