journal article·2016-04-01

Identification of Nonlinear Viscoelastic Models of Flexible Polyurethane Foam From Uniaxial Compression Data

Yousof Azizi, Patricia Davies, Anil K. Bajaj

Publisher page

Abstract

Flexible polyethylene foam is used in many engineering applications. It exhibits nonlinear and viscoelastic behavior which makes it difficult to model. To date, several models have been developed to characterize the complex behavior of foams. These attempts include the computationally intensive microstructural models to continuum models that capture the macroscale behavior of the foam materials. In this research, a nonlinear viscoelastic model, which is an extension to previously developed models, is proposed and its ability to capture foam response in uniaxial compression is investigated. It is hypothesized that total stress can be decomposed into the sum of a nonlinear elastic component, modeled by a higher-order polynomial, and a nonlinear hereditary type viscoelastic component. System identification procedures were developed to estimate the model parameters using uniaxial cyclic compression data from experiments conducted at six different rates. The estimated model parameters for individual tests were used to develop a model with parameters that are a function of strain rates. The parameter estimation technique was modified to also develop a comprehensive model which captures the uniaxial behavior of all six tests. The performance of this model was compared to that of other nonlinear viscoelastic models.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Elasticity and Material Modeling · Asphalt Pavement Performance Evaluation · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Ray W. Herrick Laboratories, School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907 e-mail:

Ray W. Herrick Laboratories, School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907

References (30)

Show source-provided references
1. Effect of Density, Microstructure, and Strain Rate on Compression Behavior of Polymeric Foams10.1016/j.msea.2005.07.006 ↗
2. A Unified Phenomenological Model for Tensile and Compressive Response of Polymeric Foams10.1115/1.3026556 ↗
3. 1999
4. High Strain Extension of Open-Cell Foams10.1115/1.482767 ↗
5. Modeling the Indentation of Low Density Polymer Foams
6. Large Deformation Isotropic Elasticity-on the Correlation of Theory and Experiment for Incompressible Rubberlike Solids10.1098/rspa.1972.0026 ↗
7. Aspects of Invariance in Solid Mechanics10.1016/S0065-2156(08)70264-3 ↗
8. Modeling Compressive Cyclic Stress-Strain Behavior of Structural Foam10.1016/S0142-1123(01)00014-7 ↗
9. Compressive Response of Polymeric Foams Under Quasi-Static, Medium and High Strain Rate Conditions10.1016/j.polymertesting.2006.05.005 ↗
10. Mechanical Behavior of Foamed Materials Under Dynamic Compression10.1177/0021955X7401000306 ↗
11. A Phenomenological Constitutive model for Foams Under Large Deformations10.1002/pen.20041 ↗
12. Banks, H. T., Potter, L. K., and Zhang, Y., 1997, “Stress-Strain Laws for Carbon Black and Silicon Filled Elastomers,” Thirty Sixth IEEEConference on Decision and Control, San Diego, CA, December, pp. 3227–3732.http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.45.5106&rep=rep1&type=pdf
13. modeling of Nonlinear Hysteresis in Elastomers Under Uniaxial Tension10.1177/1045389X9901000205 ↗
14. Constitutive modeling of the Large Strain Time-Dependent Behavior of Elastomers10.1016/S0022-5096(97)00075-6 ↗
15. An Approach to the Description of Time-Dependent Materials10.1016/S0261-3069(02)00067-5 ↗
16. Experimental Techniques and Identification of Nonlinear and Viscoelastic Properties of Flexible Polyurethane Foam10.1023/B:NODY.0000013511.07097.87 ↗
17. Dynamic modeling of Polyurethane Foam and Development of System Identification Methodologies
18. Nonlinear modeling and Identification of the Dynamic Behavior of Polyurethane Foam
19. Flexible Polyurethane Foam modeling and Identification of Viscoelastic Parameters for Automotive Seating Applications10.1016/S0022-460X(03)00104-4 ↗
20. Measurement and modeling of the Mechanical Properties of Polyurethane Foam
21. Seat-Occupant modeling and Experiment Verification for H-point Prediction in All-Foam Seats
22. A Visco-Hyperelastic Constitutive Description of Elastomeric Foam10.1016/j.ijimpeng.2004.03.011 ↗
23. Visco-Hyperelastic Constitutive Law for modeling of Foam's Behavior10.1016/j.matdes.2010.11.010 ↗
24. A Visco-Hyperelastic Approach to modeling the Constitutive Behavior of Rubber10.1016/S0734-743X(99)00044-5 ↗
25. Measurement of Experimental Responses of Polyurethane and CONOF Foams and Development of System Identification to Estimate Polyurethane Foam Parameters From Experimental Impulse Responses
26. Measurement of the Poisson's Ratio of Flexible Polyurethane Foam and Its Influence on a Uniaxial Compression model10.1016/j.ijengsci.2007.09.002 ↗
27. Measurement of Foam Properties and modeling of Layered Foam Systems
28. 1999
29. 2004
30. Identification and Investigation of Nonlinear Viscoelastic models of Flexible Polyurethane Foam From Uniaxial Compression Data10.1115/IMECE2012-88190 ↗