The Effect of Pulse Electric Current on the Mechanical Properties and Fracture Behaviors of Aluminum Alloy AA5754
Source abstract
Abstract
The influences of pulse electric currents at energy density levels of 0.105 J/mm3 and 0.150 J/mm3 on AA5754's flow stress and elongation are investigated. Different combinations of current density and pulse duration are carried out for each energy density. The non-Joule heating effects in electrically assisted forming (EAF) are revealed since the temperatures generated by the electric currents of the same energy density are identical. It is observed that a pulse current helps reduce AA5754's flow stress and increase its elongation. At the same level of energy density, as the current density increases, the instant drop of stress increases as well as the elongation, although the maximum flow stress remains almost unchanged. A theoretical model is proposed that can predict the stress drop during electrically assisted forming. The fracture surfaces of AA5754 subject to pulse currents are observed and analyzed. The dimples of fracture continue to decrease until they completely disappear as the density of pulse current increases. The suppression of voids nucleation and growth by a pulse current leads to the increase of total elongation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electromagnetic Effects on Materials · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Automotive Engineering, Dalian University of Technology, Dalian 116024, China;
Institute of Industrial and Equipment Technology, Hefei University of Technology, Hefei 230601, China e-mail:
School of Automotive Engineering, Dalian University of Technology, Dalian 116024, China e-mail:
References (23)
Show source-provided references
1. Warm Forming Behavior of High Strength Aluminum Alloy AA707510.1016/S1003-6326(11)61131-X ↗
2. Evaluation of Tensile Behavior of 5754 Aluminum–Magnesium Alloy at Cold and Warm Temperatures10.1179/174328408X365775 ↗
3. Study on Mechanical Properties and Texture of 6111 Aluminum Alloy Sheet in Automotive Industry10.13289/j.issn.1009-6264.2013.07.033 ↗
4. Material Properties of Aluminum Alloy for Accurate Draw-Bend Simulation10.1115/1.1370371 ↗
5. Improving in Plasticity of Orthorhombic Ti2AlNb-Based Alloys Sheet by High Density Electropulsing10.1016/S1003-6326(13)62425-5 ↗
6. Comments on Electroplastic Drawing and Its Structure Evolution10.3321/j.issn:1000-0054.1998.02.008 ↗
7. Investigation of Electroplastic Effect at High Deformation Rates for 304SS and Ti–6Al–4V10.1016/j.cirp.2013.03.058 ↗
8. Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically-Assisted Deformation10.1115/1.4024394 ↗
9. Study on Pure Electroplastic Effect of AZ31 Alloy and DP980 AHSS10.14158/j.cnki.1001-3814.2015.04.008 ↗
10. Experimental Study of Electrical Resistivity and Flow Stress of Stainless Steel 316L in Electroplastic Deformation10.1016/j.msea.2011.01.058 ↗
11. The Mechanical Behavior of 5052-H32 Aluminum Alloys Under a Pulsed Electric Current10.1016/j.ijplas.2014.02.002 ↗
12. Manufacturing Aspects Relating to the Effects of Direct Current on the Tensile Properties of Metals10.1115/1.2712470 ↗
13. Influence of Thermomechanical Parameters on the Hot Deformation Behavior of AA107010.1115/1.4025695 ↗
14. Investigation on the Electrically-Assisted Stress Relaxation of AZ31B Magnesium Alloy Sheet10.1016/j.jmatprotec.2015.08.009 ↗
15. Effect of Pulse Current on the Tensile Deformation of SUS304 Stainless Steel10.1007/s11665-015-1804-7 ↗
16. Constitutive Behavior Under Hot Stamping Conditions10.1016/j.jmatprotec.2015.05.007 ↗
17. The Effect of Electric Current and Strain Rate on Serrated Flow of Sheet Aluminum Alloy 575410.1007/s11665-016-1913-y ↗
18. Overview No. 1: The Nucleation of Cavities by Plastic Deformation10.1016/0001-6160(79)90051-8 ↗
19. Cavity Formation From Inclusions in Ductile Fracture10.1007/BF02672306 ↗
20. Ductile Fracture in Metals10.1080/14786435908238272 ↗
21. Grain Boundary Cavitation and Sliding in Copper/Tungsten Composites Due to Thermal Stresses10.1080/14786437308217462 ↗
22. High Temperature Deformation Behavior of Niti Alloys in DC Electric Field10.3321/j.issn:1004-0609.2006.06.014 ↗
23. Effect of Current Pulse on Mechanism of Superplastic Deformation of 2091 Al-Li Alloy10.3321/j.issn:0412-1961.2000.09.009 ↗