Mechanical Behavior of High Temperature Hybrid Carbon Fiber/Titanium Laminates
Source abstract
Abstract
The aim of this paper was to investigate the tensile and flexural properties of hybrid laminates made with titanium sheets and high modulus carbon fiber composites. Grade II titanium was used, which exhibits great high-temperature performance and creep resistance, low weight, and high strength. An inorganic fireproof matrix, known as geopolymer, was used to fabricate the high modulus carbon fiber composites. Previous studies have shown that these composites are strong, durable, lightweight, and can exhibit excellent performance up to 400°C. In the present study, a number of specimens were tested in uniaxial tension and four-point bending after exposure at elevated temperatures. The results indicate that the addition of carbon fibers can reduce the weight and increase the stiffness of the pure titanium. Moreover, the hybrid laminates are stronger and stiffer than the sum of the individual strengths and stiffnesses of the parent materials. An important finding is that the interlaminar bond is strong, and as a result no delamination failures were observed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fire effects on concrete materials · Natural Fiber Reinforced Composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil and Environmental Engineering, University of Massachusetts Dartmouth, 285 Old Westport Road, North Dartmouth, MA 02747
References (41)
Show source-provided references
1. Askeland · 610
2. Hussein
3. Fatigue Damage Mechanisms in Advanced Hybrid Titanium Composite Laminates10.1016/S0142-1123(01)00208-0 ↗
4. Hybrid Titanium Composite Material Improving Composite Structure Coupling
5. Influence of Processing Methods on the Tensile and Flexure Properties of High Temperature Composites10.1016/j.compscitech.2003.12.008 ↗
6. Titanium Ply Effects on the Behavior of a Hybrid Thermoplastic Composite Laminate10.1177/089270579801100504 ↗
7. Miller · 223
8. High Temperature Hybrid Titanium Composite Laminates: An Early Analytical Assessment10.1007/BF00133681 ↗
9. Rhymer, D. W. , 1999, “Fatigue Damage Mechanisms of Advanced Hybrid Titanium Composite Laminates,” MSc thesis, Georgia Institute of Technology, Atlanta, GA.
10. CFRP/Titanium Hybrid Material for Improving Composite Bolted Joints
11. Geopolymers and Geopolymeric Materials10.1007/BF01904446 ↗
12. Geopolymers-Inorganic Polymeric New Materials10.1007/BF01912193 ↗
13. Fire-Resistant Aluminosilicate Composites10.1002/(SICI)1099-1018(199703)21:2<67::AID-FAM596>3.3.CO;2-E ↗
14. High Temperature Inorganic Resins for Use in Fiber Reinforced Composites
15. Foden, A. J. , 1999, “Mechanical Properties and Material Characterization of Polysialate Structural Composites,” Ph.D. thesis, Rutgers, the State University of New Jersey, New Brunswick, NJ.
16. Mechanical Properties and Fire Response of Geopolymer Structural Composites
17. Hybrid Composites With Glass/Carbon Fibers and Inorganic/Organic Matrices
18. Fire Protection of Flammable Materials Utilizing Geopolymer
19. Flexural Behavior of Balsa Wood Cores Reinforced With Inorganic Carbon Composite
20. Use of Inorganic Polymer to Improve the Fire Response of Balsa Sandwich Structures10.1061/(ASCE)0899-1561(2006)18:3(390) ↗
21. Hammell, J. A. , 2000, “The Influence of Matrix Composition and Reinforcement Type on the Properties of Polysialate Composites,” Ph.D. thesis, Rutgers, the State University of New Jersey, New Brunswick, NJ..
22. Tensile Strain Capacity of Geopolymers by Cantilever Beam Method
23. Strength Retention of Fire Resistant Aluminosilicate-Carbon Composites Under Wet-Dry Conditions10.1016/S1359-8368(99)00072-4 ↗
24. An Early Investigation of High Modulus Carbon Fiber/Titanium Laminates
25. Comparative Study of High Temperature Composites10.1016/S1359-8368(01)00042-7 ↗
26. Fatigue Behavior of High Temperature Inorganic Matrix Composites10.1061/(ASCE)0899-1561(2007)19:4(321) ↗
27. Geopolymer Protective Coatings for Concrete
28. Fire Response and Mechanical Behavior of Polysialate Syntactic Foams10.1016/j.compositesa.2007.08.029 ↗
29. Rosato · 1
30. Campbell · 1
31. Rosato · 1
32. Better Vacuum Bagging; Applying Science to an Old Art
33. Campbell · 1
34. Mechanical Properties of Carbon Composites Made Using An Inorganic Polymer
35. Influence of Reinforcement Types on the Flexural Properties of Geopolymer Composites
36. 2006, ASTM Standard D3039/D3039M-00, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA.
37. 2006, ASTM Standards C1341–06, Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites, ASTM International, West Conshohocken, PA.
38. Oxidation Resistance of Carbon Fibers With Protective Coatings10.1007/BF00801591 ↗
39. Oxidation Resistance of Carbon Fibres
40. Kinetics and Models of Carbon Fiber Oxidation at High Temperature Atmosphere in Air
41. Influence of Boron Treatment on Oxidation of Carbon Fiber in Air10.1002/(SICI)1097-4628(19960207)59:6<915::AID-APP2>3.0.CO;2-S ↗