Characterizing the Hemming Performance of Automotive Aluminum Alloys With High-Resolution Topographic Imaging
Source abstract
Abstract
We used high-resolution quantitative surface analysis to evaluate the surfaces of two aluminum automotive closure panel alloys, which were bent to a 180 deg angle in a simulated hemming test. Maps of the displacements normal to the sheet were superimposed on the topographies to correlate the location of the maximum displacements and the surface morphology. While the alloys had similar mechanical properties, quantitative analyses yielded considerable differences in the deformed surface morphologies. One alloy had a greater density and broader size distribution of constituent particles, which increased the likelihood for particle decohesion. This resulted in large surface displacements that were uncorrelated with the underlying microstructure. While no splitting was observed in either alloy, large uncorrelated surface displacements could indicate the presence of short surface cracks.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Performance Group, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899-8553 e-mail:
General Motors Technical Center, 30500 Mound Road, Warren, MI 48090-9005 e-mail:
General Motors Technical Center, 30001 Van Dyke Road, Warren, MI 48090 e-mail:
References (58)
Show source-provided references
1. Class-A Surfaces
2. Effects of Spatial Grain Orientation Distribution and Initial Surface Topography on Sheet Metal Necking10.1016/j.ijplas.2006.11.005 ↗
3. Bending in Aluminium Alloys AA 6111 and AA 5754 Using the Cantilever Bend Test10.1179/026708302225003604 ↗
4. Plasticity Associated With Grain Boundaries During the Bending of an Al–Mg–Si-Based Alloy10.1016/j.scriptamat.2010.04.046 ↗
5. Friedman, P. A., and Luckey, S. G., 2001, “Bendability of Al-Mg-Si Sheet Alloys for Automotive Closure Applications,” Aluminum 2001: Proceedings of the 2001 TMS Annual Meeting Automotive Alloys and Joining Aluminum Symposia, New Orleans, LA, February 11–15, S. K.Das, J. G.Kaufman, and T. J.Lienert, eds., TMS, Warrendale, PA, pp. 3–15.
6. 2008
7. 2005
8. 2003
9. Atoms to Autos: A Multi-Scale Approach to Modeling Aluminum Deformation10.1007/s11837-011-0187-y ↗
10. A Study of the Fundamental Relationships Between Deformation-Induced Surface Roughness and Strain Localization in AA575410.1007/s11661-009-9881-6 ↗
11. The Fundamental Relationships Between Deformation-Induced Surface Roughness, Critical Strain Localization, and Failure in AA5754-O10.1080/14786430903120343 ↗
12. Topographic Analysis and Weibull Regression for Prediction of Strain Localisation in an Automotive Aluminium Alloy10.1179/026708310X12701149768179 ↗
13. The Fundamental Relationships Between Grain Orientation, Deformation-Induced Surface Roughness and Strain Localization in an Aluminum Alloy10.1016/j.msea.2011.09.050 ↗
14. Precipitation Strengthening of the Aluminum Alloy AA611110.1007/s11661-003-0191-0 ↗
15. The Influence of Precipitation on the Work-Hardening Behavior of the Aluminum Alloys AA6111 and AA703010.1007/s11661-003-0007-2 ↗
16. Krajewski, P. E., and Carsley, J. E., 2003, “Heat Treatment Effects on Bending in AA6111,” Aluminum 2003: Proceedings of the 2003 TMS Annual Meeting, San Diego, CA, March 2–6, S. K.Das, ed., TMS, Warrendale, PA, pp. 25–35.
17. Carsley, J. E., 2005, “Microstructural Evolution During Bending: Conventional vs. Roller Hemming,” Trends in Materials and Manufacturing Technologies for Transportation Industries and Powder Metallurgy Research and Development in the Transportation Industry: 6th MPMD Global Innovations Symposium, San Francisco, CA, February 13–17, T. R.Bieler, J. E.Carsley, H. L.Fraser, J. W.Sears, and J. E.Smurgeresky, eds., TMS, Warrendale, PA, pp. 169–174.
18. Classical and Roll-Hemming Processes of Pre-Strained Metallic Sheets10.1007/s11340-009-9297-7 ↗
19. Evaluation of Formability in Bending/Hemming of Aluminum Alloys Using Plane-Strain Tensile Tests10.1115/1.3123316 ↗
20. The Mechanical Properties of Metals10.1088/0370-1301/64/9/301 ↗
21. Influence of Microstructure-Driven Strain Localization on the Ductile Fracture of Metallic Alloys
22. Development of Microstructure in FCC Metals During Cold Work
23. Tensile Properties and Bendability of T4 Treated AA6111 Aluminum Alloys
24. Effect of Strain Rate and Temperature of Tensile Test on Lüders Strain in Al-Mg Alloys
25. Deformation Inhomogeneity in Large-Grained AA5754 Sheets10.1016/j.msea.2011.02.017 ↗
26. Effect of Precipitates on Plastic Anisotropy of Polycrystalline Aluminum Alloys
27. Numerical Modeling of Second-Phase Particle Effects on Localized Deformation
28. Uchida, H., Asano, M., and Yoshida, H., 2002, “Effect of Second Phase Particles on the Bendability of Al-Mg-Si Alloy Sheet,” Aluminum 2002: Proceedings of the TMS 2002 Annual Meeting: Automotive Alloys and Aluminum Sheet and Plate Rolling and Finishing Technology Symposia, Seattle, WA, February 18–21, S. K.Das and M. H.Skillingberg, eds., TMS, Warrendale, PA, pp. 57–64.
29. The Effect of Prestrain on the Natural Aging and Fracture Behaviour of AA6111 Aluminum10.1023/B:JMSC.0000035323.96458.68 ↗
30. Deformation Mechanism Maps Based on Grain Size10.1007/BF02644014 ↗
31. Strain Gradient Plasticity Analysis of the Grain-Size-Dependent Strength and Ductility of Polycrystals With Evolving Grain Boundary Confinement10.1016/j.actamat.2010.06.052 ↗
32. Realistic Constitutive Relations for Metal Plasticity10.1016/S0921-5093(01)01174-1 ↗
33. Influence of Grain Size on Orientation Changes During Plastic Deformation
34. Texture Development in 6000 Series Al-Mg-Si Alloys for Car Body Panels
35. Evolution of Texture During Thermo-Mechanical Processing of an Al-Mg-Si-Cu Alloy10.1016/S1359-6462(98)00045-1 ↗
36. Influence of Crystal Orientations on the Bendability of an Al-Mg-Si Alloy10.2320/matertrans.L-MG200951 ↗
37. Effects of Cu Content and Preaging on Precipitation Characteristics in Aluminum Alloy 602210.1007/s11661-000-0272-2 ↗
38. The Effects of Copper and Chromium on the Aging Response of Dilute Al-Mg-Si Alloys10.1007/BF02645517 ↗
39. Phase Relations and Precipitation in Al–Mg–Si Alloys With Cu Additions10.1016/S0079-6425(03)00031-8 ↗
40. Quantification of Grain Boundary Precipitation and the Influence of Quench Rate in 6XXX Aluminum Alloys10.1016/j.matchar.2006.03.007 ↗
41. Role of Hardening Solutes on the Microstructure and Strength of AA6111 Automotive Alloy
42. 2003
43. Microstructure Controlled Bending Response in AA6016 Al Alloys
44. ASTM Designation E-08: Standard Test Methods for Tension Testing of Metallic Materials
45. Using Image-Based Methods to Characterize the Height Distribution of Deformation-Induced Surface Roughness Generated in Aluminum Sheet10.1179/174328407X236562 ↗
46. Euclidean Distance Matrix
47. 1987
48. 1984
49. Dispersoid Phases in 6xxx Series Aluminum Alloys
50. 1997–2011
51. 1981
52. 2003
53. Weibull Distribution
54. 1976
55. A Micromechanical Study on Strain-Localization-Induced Fracture Initiation in Bending Using Crystal Plasticity Models10.1080/01418610108216649 ↗
56. Grain Boundary Ductile Fracture in Precipitation Hardened Aluminum Alloys10.1016/0001-6160(87)90001-0 ↗
57. Short Crack Growth Behavior
58. Metallurgical Factors Affecting Fracture Toughness of Aluminum Alloys10.1007/BF02672285 ↗