journal article·2012-04-01

Numerical Modeling of the Failure of Magnesium Tubes Under Compressive Loading

Jonathan Rossiter, Kaan Inal, Raja Mishra

Publisher page

Abstract

A new finite element (FE) specific failure criterion utilizing hardening rates to quantify bending stress is implemented into the MAT_124 material model in the commercial software LS-DYNA to simulate fracture of extruded AZ31 and cast AM60 magnesium alloy tubes. The simulations are performed by requiring element erosion of hexahedral solid elements in a three-dimensional (3D) FE model when the failure criterion is satisfied at any point in the simulation. Experimental stress–strain curves from tensile and compression tests of the materials are used as inputs in the model. The simulations reproduce the measured load displacement data as well as general features of the experimental failure modes of round and rectangular tubes undergoing axial crush tests. The model is applied to investigate the effects of a variety of design features, such as varying tube wall thickness, preformed bulges, alternate bands of Al and Mg alloys, and cladding Al on magnesium, on the macroscopic strain to failure. The results show that adding multiple preformed bulges to the tubes can increase the strain to failure and reduce the force required to cause deformation. Adding a single bulge concentrates the strain causing reduced macroscopic strain to failure. Placing sections of reduced wall thickness or brazing in sections of aluminum causes stress concentrations which reduce the macroscopic strain to failure. Cladding aluminum onto the outside of the magnesium tube is shown to improve strain to failure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, N2L 3G1, Canada

General Motors Research and Development Center, 30500 Mound Road, Warren, MI 48090-9055

References (16)

Show source-provided references
1. Multi-Objective Crashworthiness Design Optimisation of This-Walled Tubes10.1504/IJVD.2010.029635 ↗
2. The Effect of Geometrical Parameters on the Energy Absorption Characteristics of Thin-Walled Structures Under Axial Impact Loading10.1080/13588260903488750 ↗
3. Crash Response of Advanced High-Strength Steel Tubes: Experiment and Model10.1016/j.ijimpeng.2009.02.006 ↗
4. Improving the Crashworthiness Characteristics of Cylindrical Tubes Subjected to Axial Compression by Cutting Wide Grooves From Their Outer Surface10.1080/13588260902896466 ↗
5. Wagner, D. A., Logan, S. D., Wang, K., Skszek, T., and Salisbury, C. P., 2009, “Test Results and FEA Predictions From Magnesium AM30 Extruded Beams in Bending and Axial Compression,” TMS Paper No. 2010-01-0405.10.4271/2010-01-0405 ↗
6. High-Resolution Finite Element Models With Tissue Strength Asymmetry Accurately Predict Failure of Trabecular Bone10.1016/S0021-9290(00)00149-4 ↗
7. Constitutive Modeling of Textured Body-Centered-Cubic Polycrystals10.1016/S0749-6419(99)00004-2 ↗
8. Analytic Plastic Potential for Porous Aggregates With Matrix Exhibiting Tension-Compression Asymmetry10.1016/j.jmps.2008.10.010 ↗
9. Formability Analysis of Magnesium Alloy Sheets at Elevated Temperatures With Experimental and Numerical Method10.1115/1.2977823 ↗
10. Temperature and Strain Rate Effect Incorporated Failure Criteria for Sheet Forming of Magnesium Alloys10.1016/j.msea.2007.11.077 ↗
11. Optimization of the Foam-Filled Aluminum Tubes for Crush Box Application10.1016/j.tws.2007.07.016 ↗
12. Livermore Software Technology Corporation, 2007, LS-DYNA Keyword User’s Manual, Version 971, Livermore Software Technology Corporation.
13. Magnesium Alloy Applications in Automotive Structures10.1007/s11837-008-0150-8 ↗
14. Twinning and Texture Development in Two Mg Alloys Subjected to Loading Along Three Different Strain Paths10.1016/j.actamat.2007.03.006 ↗
15. A Comparative Study on Finite Element Methods for Dynamic Fracture10.1007/s00466-007-0210-x ↗
16. United States Automotive Materials Partnership (USAMP), Automotive Metals Division (AMD), data posted Aug. 28, 2009.