Creep Rupture Due to Material Damage by Cavitation
Source abstract
Abstract
Abstract A phenomenological model to predict creep rupture times, based on material damage due to void growth and coalescence is presented. The model employs the Gurson-Tvergaard yield function together with the Norton-Baily power creep law. Rupture occurs at the end of a tertiary creep stage when the load-carrying capacity of the test-piece vanishes. Formulations for both uniaxial and triaxial conditions are given. Comparisons among the predictions of the present model and experiments for a vast number of data points indicate satisfactory agreement. A relation incorporating steady-state creep rate, rupture strain and rupture time is suggested. Furthermore acceptable correlation of the creep-rupture strength and creep strength to cause a specified creep strain is obtained.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza, Egypt
References (33)
Show source-provided references
1. Hoff, N. J. , 1953, “Necking and Rupture of Rods under Tensile Loads,” ASME J. Appl. Mech., 20, p. 105105.10.1115/1.4010601 ↗
2. Kachanov, L. M. , 1958, “Time of the Fracture Process under Creep Conditions,” (in Russian) Izv. Akad. Nauk SSSR, No. 8, p. 2828.
3. Hancock, J. W. , 1976, “Creep Cavitation without a Vacancy Flux,” Metal Science, , 10, p. 319319.10.1179/msc.1976.10.9.319 ↗
4. Beere, W., and Speight, M. V., 1978, “Creep Cavitation by Vacancy Diffusion in Plastically Deforming Solid,” Metal Science, , 4, p. 172172.10.1179/msc.1978.12.4.172 ↗
5. Boyle, J. T., and Spence, J., 1983, Stress Analysis for Creep, Butterworths.10.1016/B978-0-408-01172-3.50008-0 ↗
6. Needleman, A., and Rice, J. R., 1980, “Plastic Creep Flow Effects in the Diffuse Cavitation of Grain Boundaries,” Acta Metall., 28, p. 13151315.10.1016/0001-6160(80)90001-2 ↗
7. Cocks, A. C. F., and Ashby, M. F., 1982, “Creep Fracture by Coupled Power-Law Creep and Diffusion Under Multiaxial Stress,” Metal Science, , 16, p. 465465.10.1179/msc.1982.16.10.465 ↗
8. Tvergaard, V. , 1982, “On Localization in Ductile Materials Containing Spherical Voids,” Int. J. Fract., 18, p. 237237.10.1007/BF00015686 ↗
9. Ragab, A. R., and Saleh, Ch. A. R., 1999, “Evaluation of Constitutive Models for Voided Solids,” Int. J. Plast., 15, p. 10411041.10.1016/S0749-6419(99)00024-8 ↗
10. Bridgman, P. W., 1952, Studies in Large Plastic Flow and Fracture, McGraw-Hill, N.Y.
11. Tegart, W. J. M., 1966, Elements of Mechanical Metallurgy, Macmillan, N.Y.
12. Ragab, A. R. , 2000, “Prediction of Ductile Fracture in Axisymmetric Tension by Void Coalescence,” Int. J. Fract., 105, p. 391391.
13. Needleman, A. , 1972, “A Numerical Study of Necking in Circular Cylindrical Bars,” J. Mech. Phys. Solids, 20, p. 111111.10.1016/0022-5096(72)90035-X ↗
14. Norris, D. M., Moran, B., Jr., Scudder, J. K., and Quinonse, D. F., 1978, “A Computer Simulation of the Tension Test,” J. Mech. Phys. Solids, 26, p. 11.10.1016/0022-5096(78)90010-8 ↗
15. Ragab, A. R., and Saleh, Ch. A. R., 1999, “Effect of Void Growth on Predicting Forming Limit Strains for Planar Isotropic Sheet Metals,” Mech. Mater., 32, p. 7171.10.1016/S0167-6636(99)00041-1 ↗
16. Odqvist, F. K. G., 1966, Mathematical Theory of Creep and Creep Rupture, Oxford-Clarendon Press.
17. Wiggin Alloys Ltd, The Nimonic Alloys-Design Data.
18. Townley, C. H. A., et al., 1991, “High Temperature Design Data for Ferritic Pressure Vessel Steels,” Creep of Steels Working Party (CSWP), Inst. Mech. Engrs., J. Mech. Enging., London.
19. McClintock, F. A. , 1968, “A Criterion for Ductile Enlargement of Voids in Triaxial Stress Fields,” ASME J. Appl. Mech., 4, p. 363363.
20. Melander, A. , 1983, “A New Model of The Forming Limit Diagram Applied to Experiments on Four Copper-Brass Alloys,” Mater. Sci. Eng., 58, p. 6363.10.1016/0025-5416(83)90138-6 ↗
21. Thomson, R. D., and Hancock, J. W., 1984, “Ductile failure by Void Nucleation, Growth and Coalescence,” Int. J. Fract., 26, p. 9999.10.1007/BF01157547 ↗
22. Parmar, A., and Mellor, P. B., 1980, “Growth of Voids in Biaxial Stress Fields,” Int. J. Mech. Sci., 22, p. 133133.10.1016/0020-7403(80)90063-6 ↗
23. Bampton, C. C., and Raj, R., 1982, “Influence of Hydrostatic Pressure and multiaxial Straining on Cavitation in Superplastic Aluminum Alloys,” Acta Metall., 30, p. 20352035.10.1016/0001-6160(82)90107-9 ↗
24. Juvinall, R. C., 1967, Stress, Strain and Strength, McGraw-Hill, N.Y. p. 416.
25. Howard, E. B., ed., 1997, “Atlas of Creep and Stress-Rupture Curves,” ASM. Ant, Metals Park, Ohio.
26. Forest, C., Monkman, F. C., and Grant, N. J., 1956, “An Empirical Relationship Between Rupture Life and Minimum Creep Rate in Creep-Rupture Tests,” Proc. ASTM, Vol. 56, p. 593–620.
27. Dobes, F., and Milicka, K., 1976, “The Relation Between Minimum Creep Rate and Time to Fracture,” Met. Sci. , 10, p. 382382.10.1080/03063453.1976.11683560 ↗
28. Richards, E. G. , 1968, “Influence of Specimen Size and Grain Size on the Creep- Rupture Strength of Some Nickle-Base High Temperature Alloys,” J. Inst. Met., 98, p. 365365.
29. Goldhoff, R. M., and Gill, R. F., 1972, “A Method for Predicting Creep Data for Commercial Alloys on a Correlation Between Creep Strength and Rupture Strength,” ASME J. Basic Eng., 94, p. 11.10.1115/1.3425365 ↗
30. Moon, D. P., Simon, R. C., and Favor, R. J., 1968, “The Elevated-Temperature Properties of Selected Superalloys,” ASTM, p. 335.10.1520/DS7S1-EB ↗
31. Simmons, W. F., and Cross, H. C., 1955, “Elevated-Temperature Properties of Carbon Steels,” ASTM Special Technical Publication, No. 180, p. 5.10.1520/STP180-EB ↗
32. Hashem, A. M. , 1997, “Influence of the Heat Treatment on Creep Behavior of Nickel Aluminide with Boron,” Adv. Perform. Mater, 4, p. 99.
33. Data sheet from International Nickle Co., Inc., Development and Research Dept., 76 Wall St., N.Y. 10005, Undated. (See Goldhoff and Gill; 1972 29).