journal article·2014-04-01

Microstructure-Sensitive Fatigue Modeling of AISI 4140 Steel

J. B. Jordon, M. F. Horstemeyer

Publisher page

Abstract

A microstructure-based fatigue model is employed to predict fatigue damage in 4140 steel. Fully reversed, strain control fatigue tests were conducted at various strain amplitudes and scanning electron microscopy was employed to establish structure-property relations between the microstructure and cyclic damage. Fatigue cracks were found to initiate from particles near the free surface of the specimens. In addition, fatigue striations were found to originate from these particles and grew radially outward. The fatigue model used in this study captured the microstructural effects and mechanics of nucleation and growth observed in this ferrous metal. Good correlation of the number of cycles to failure between the experimental results and the model were achieved. Based on analysis of the mechanical testing, fractography and modeling, the fatigue life of the 4140 steel is estimated to comprise mainly of small crack growth in the low cycle regime and crack incubation in the high cycle fatigue regime.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, The University of Alabama, Tuscaloosa, AL 35401

Department of Mechanical Engineering, Mississippi State University, Mississippi State, MS 39762;

Center for Advanced Vehicular Systems, Mississippi State University, Mississippi State, MS 39762

References (27)

Show source-provided references
1. 1998
2. Microstructure-Based Fatigue Modeling of Cast A356-T6 Alloy10.1016/S0013-7944(02)00021-8 ↗
3. Microstructural Inclusion Influence on Fatigue of a Cast A356 Aluminum Alloy10.1007/s11661-009-0088-7 ↗
4. Micromechanisms of Multistage Crack Growth in a High-Strength Aluminum Alloy10.1016/j.actamat.2006.11.009 ↗
5. Microstructure-Based Multistage Fatigue Modeling of Aluminum Alloy 7075-T65110.1016/j.engfracmech.2006.12.031 ↗
6. Microstructure-Based Multistage Fatigue Modeling of a Cast AE44 Magnesium Alloy10.1016/j.ijfatigue.2006.07.005 ↗
7. Effect of Twinning, Slip, and Inclusions on the Fatigue Anisotropy of Extrusion-Textured AZ61 Magnesium Alloy
8. Low-Cycle Fatigue Behavior of Die-Cast Mg Alloys AZ91 and AM6010.1007/s11661-012-1114-8 ↗
9. Role of Different Material Processing Methods on the Fatigue Behavior of AZ31 Magnesium Alloy10.1016/j.ijfatigue.2013.02.017 ↗
10. Microporosity Effects on Cyclic Plasticity and Fatigue of LENS™-Processed Steel10.1016/j.actamat.2010.03.014 ↗
11. Improvement of the Fatigue Strength of AISI 4140 Steel by an Ion Nitriding Process10.1016/0257-8972(94)02348-4 ↗
12. Fatigue Strength Improvement of a 4140 Steel by Gas Nitriding: Influence of Notch Severity
13. Fatigue Crack Propagation in 4140 Steel10.1007/BF03161840 ↗
14. Cyclic Stress Strain Relations and Strain-Controlled Fatigue of 4140 Steel10.1016/0001-6160(76)90140-1 ↗
15. 1990 · 140
16. Strain-Controlled Low-Cycle Fatigue Properties of a Newly Developed Extruded Magnesium Alloy10.1007/s11661-008-9677-0 ↗
17. 2012
18. Hayhurst, D. R., LeckieF. A., and McDowell, D. L., 1985, “Damage Growth Under Nonproportional Loading,” ASTM, Philadelphia, Paper No. ASTM STP 853, pp. 688–699.10.1520/STP36250S ↗
19. Damage and Stress State Influence on the Bauschinger Effect in Aluminum Alloys10.1016/j.mechmat.2007.03.004 ↗
20. Work-Hardening/Softening Behaviour of BCC Polycrystals During Changing Strain Paths: I. An Integrated Model Based on Substructure and Texture Evolution, and Its Prediction of the Stress–Strain Behaviour of an IF Steel During Two-Stage Strain Paths10.1016/S1359-6454(01)00066-0 ↗
21. A Model for Finite-Deformation Plasticity10.1007/BF01175716 ↗
22. A Damage Model for Ductile Metals10.1016/0029-5493(89)90095-2 ↗
23. Failure in Ductile Materials Using Finite Element Methods
24. Modeling Large Deformation and Failure in Manufacturing Processes
25. A Void-Crack Nucleation Model for Ductile Metals10.1016/S0020-7683(98)00239-X ↗
26. Modeling Stress State Dependent Damage Evolution in a Cast Al-Si-Mg Aluminum Alloy10.1016/S0167-8442(99)00049-X ↗
27. Damage Characterization and Modeling of a 7075-T651 Aluminum Plate